Agronomic performance of high oleic,low linolenic soybean in Tennessee

Soybean oil hydrogenation alters the linolenic acid molecule to prevent the oil from becoming rancid, however, health reports have indicated trans-fat caused by hydrogenation, is not generally regarded as safe. Typical soybeans contain approximately 80 g kg⁻¹ to 120 g kg⁻¹ linolenic acid and 240 g kg⁻¹ of oleic acid. In an effort to accommodate the need for high-quality oil, the United Soybean Board introduced an industry standard for a high oleic acid greater than 750 g kg⁻¹ and linolenic acid less than 30 g kg⁻¹ oil. By combing mutations in the soybean plant at four loci, FAD2-1A and FAD2-1B, oleate desaturase genes and FAD3A and FAD3C, linoleate desaturase genes, and seed oil will not require hydrogenation to prevent oxidation and produce high-quality oil. In 2017 and 2018, a study comparing four near-isogenic lines across multiple Tennessee locations was performed to identify agronomic traits associated with mutations in FAD3A and FAD3C loci, while holding FAD2-1A and FAD2-1B constant in the mutant (high oleic) state. Soybean lines were assessed for yield and oil quality based on mutations at FAD2-1 and FAD3 loci. Variations of wild-type and mutant genotypes were compared at FAD3A and FAD3C loci. Analysis using a generalized linear mixed model in SAS 9.4, indicated no yield drag or other negative agronomic traits associated with the high oleic and low linolenic acid genotype. All four mutations of fad2-1A, fad2-1B, fad3A, and fad3C were determined as necessary to produce a soybean with the new industry standard (>750 g kg⁻¹ oleic and <30 g kg⁻¹ linolenic acid) in a maturity group-IV-Late cultivar for Tennessee growers.     

Mechanical property enhancement of non‐bonding electrospun mats via adhesive

In the present study, the effect of adhesive on the morphology of different electrospun polymeric mats was investigated. The modification of two polymers, poly(methyl methacrylate) and poly(vinyl chloride), was carried out by blending the polymers with different amounts of poly(butyl acrylate) (PBA) adhesive to investigate the effect of different amounts of adhesive with heat hardener in hybrid mats. The introduction of various concentrations of PBA into different polymer solutions led to the formation of point‐bonded electrospun fibrous mats. Scanning electron microscopy images indicated that point‐bonded polymer/adhesive fibers were uniformly distributed throughout the mats. Fourier transform infrared spectrometry, contact angle measurements and thermogravimetric analysis were used to study the different properties of the hybrid mats. The tensile strength of the blended fibrous electrospun mats was increased effectively. This enhancement of the mechanical properties of the mats due to the presence of adhesive increases the number of potential applications of the electrospun mats, especially for mechanically weak polymers. Copyright © 2012 Society of Chemical Industry     

Field Performance of High Oleic Soybeans with Mutant FAD2-1A and FAD2-1B Genes in Tennessee

Soybean [Glycine max (L.) Merr.] oil with high oleic acid (>75%) has increased oxidative stability and health benefits that are valuable for food, fuel, and industrial products. It has been determined that two naturally occurring mutations in genes FAD2-1A and FAD2-1B can combine to produce high oleic soybeans. The objective of this study was to test the effect of these mutant alleles on seed yield and oil and protein concentration. Molecular markers assisted in the creation of a population of 48 BC₃F_2:4 lines (93.75% expected genome commonality). Each line was classified into one of four genotypic groups where both FAD2-1A and FAD2-1B genes were either homozygous wild type or mutant, respectively. Twelve lines for each genotypic group were evaluated in three replications at six locations across Tennessee. There was no seed yield difference between the high oleic genotypic group and the other groups (P < 0.05). On the other hand, there were differences in fatty acid profiles and oil and protein concentrations. In combination, the mutant FAD2-1A and FAD2-1B alleles produced a mean of 803.1 g kg⁻¹ oleic acid. This is, on average, approximately 500 g kg⁻¹ more oleic acid compared to soybean lines with only one mutant FAD2-1 allele. The high oleic double mutant group had more total oil (228.0 g kg⁻¹) and protein (401.0 g kg⁻¹) compared to all other genotypic groups (P < 0.05). Overall, this specific combination of mutant FAD2-1A and FAD2-1B alleles appears to generate conventional high oleic soybeans without a yield drag.     

A green and facile one-pot synthesis of Ag–ZnO/RGO nanocomposite with effective photocatalytic activity for removal of organic pollutants

In this study, Ag–ZnO/reduced graphene oxide (Ag–ZnO/RGO) composite was synthesized by a green and facile one-step hydrothermal process. Aqueous suspension containing Ag and ZnO precursors with graphene oxide (GO) sheets was heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and Photoluminescence (PL) spectroscopy which revealed the formation of composite of metal, metal oxide and RGO. It was observed that the presence of Ag precursor and GO sheets in the hydrothermal solution could sufficiently decrease the size of ZnO flowers. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to have good photocatalytic and antibacterial activity. The perfect recovery of catalyst after reaction and its unchanged efficiency for cyclic use showed that it will be an economically and environmentally friendly photocatalyst.     

Improvement of fuel properties of cottonseed oil methyl esters with commercial additives

The low temperature operability and oxidative stability of cottonseed oil methyl esters (CSME) were improved with four anti‐gel additives as well as one antioxidant additive, gossypol. Low temperature operability and oxidative stability of CSME was determined by cloud point (CP), pour point (PP), cold filter plugging point (CFPP), and oxidative stability index (OSI). The most significant reductions in CP, PP, and CFPP in all cases were obtained with Technol®, with the average reduction in temperature found to be 3.9 °C. Gunk®, Heet®, and Howe's® were progressively less effective, as indicated by average reductions in temperature of 3.4, 3.0, and 2.8 °C, respectively. In all cases, the magnitude of CFPP reduction was greater than for PP and especially CP. Addition of gossypol, a polyphenolic aldehyde, resulted in linear improvement in OSI (R² = 0.9804). The OSI of CSME increased from 5.0 to 8.3 h with gossypol at a concentration of 1000 ppm.     

The introduction of obstetric forceps in Norway--a 250-year anniversary

Johan Gottfried Erichsen (1713-68), born in Germany and chief medical officer in Bergen from 1747, was probably the first to perform a forceps delivery in Norway, on 14 February 1748. The mother, who had been in labour for five days, survived; the child, however, did not. The obstetric forceps had been a secret in the Chamberlen family and had become more widely known only a few decades earlier. Erichsen, who was the first man-midwife in Norway, had learned obstetrics in Paris by the younger Grégoire. He mastered both the techniques of internal version and forceps delivery. This article describes Erichsen's medical and obstetric background and his qualifications for operative obstetrics. He worked in the period when the obstetric forceps changed obstetrics, birth delivery became an arena also for men, and a part of medicine. Obstetrics was established as a science and physicians had a tool whereby also children could be saved during complicated delivery.     

Kinetics of oxygen dissolution in molten lead

An electromotive force cell employing the ZrO₂-CaO solid electrolyte has been set up to investigate the kinetics of dissolution of oxygen in molten lead under various oxidizing conditions. The cell may be written as The cell has been so designed that the electrode chambers are completely isolated from each other. The oxygen in lead is first reduced to a very low value by bubbling hydrogen. subsequently, oxygen dissolution is achieved through gas diffusion across the free surface or through bubble metal interaction. During all these reactions the electromotive force of the cell changes continuously and is automatically recorded. The diffusion coefficient of oxygen in lead, as calculated from the experimental data, is 1.29×10⁻⁵ sq cm per sec and the liquid phase mass transfer coefficient is estimated to be 0.035 cm per sec at 750°C.     

Electrospun gelatin/nylon‐6 composite nanofibers for biomedical applications

We describe the preparation and characterization of gelatin‐containing nylon‐6 electrospun fibers and their potential use as a bioactive scaffold for tissue engineering. The physicochemical properties of gelatin/nylon‐6 composite nanofibers were analyzed using field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, TGA and contact angle and tensile measurements. FE‐SEM and TEM images revealed that the nanofibers were well oriented and showed a good incorporation of gelatin. FTIR spectroscopy and TGA also revealed that there was good interaction between the two polymers at the molecular level. The adhesion, viability and proliferation properties of osteoblast cells on the gelatin/nylon‐6 composite nanofibers were analyzed by an in vitro cell compatibility test. Our results suggest that the incorporation of gelatin can increase the cell compatibility of nylon‐6 and therefore the composite mat obtained has great potential in hard tissue engineering. © 2012 Society of Chemical Industry     

The first cesarean section in Norway

The first reported caesarean section in Norway was performed on 20 August 1843 by a general practitioner, Lars Thalian Backer (1812-84). The operation took place in Lardal, Vestfold County, on a 27 year old woman who had been in labour for six days. The outcome was disastrous; she was delivered of stillborn twins and died 2 1/2 days after the operation. In the 19th century, infection, bleeding and thromboembolic disease made caesarean section a dangerous operation, and only 26 such operations are known in Norway, most of them performed outside hospitals. The first caesarean section in Norway resulting in a living child was performed in 1849, but no mother survived the operation before 1890. We recapitulate the caesarean section of 1843; Dr Backer and his qualifications for operative obstetrics; and the state of instrumental and surgical obstetrics in Norway at that time.     

Photocatalytic and antibacterial properties of a TiO2/nylon-6 electrospun nanocomposite mat containing silver nanoparticles

Silver-impregnated TiO(2)/nylon-6 nanocomposite mats exhibit excellent characteristics as a filter media with good photocatalytic and antibacterial properties and durability for repeated use. Silver nanoparticles (NPs) were successfully embedded in electrospun TiO(2)/nylon-6 composite nanofibers through the photocatalytic reduction of silver nitrate solution under UV-light irradiation. TiO(2) NPs present in nylon-6 solution were able to cause the formation of a high aspect ratio spider-wave-like structure during electrospinning and facilitated the UV photoreduction of AgNO(3) to Ag. TEM images, UV-visible and XRD spectra confirmed that monodisperse Ag NPs (approximately 4 nm in size) were deposited selectively upon the TiO(2) NPs of the prepared nanocomposite mat. The antibacterial property of a TiO(2)/nylon-6 composite mat loaded with Ag NPs was tested against Escherichia coli, and the photoactive property was tested against methylene blue. All of the results showed that TiO(2)/nylon-6 nanocomposite mats loaded with Ag NPs are more effective than composite mats without Ag NPs. The prepared material has potential as an economically friendly photocatalyst and water filter media because it allows the NPs to be reused.