A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

K-ras gene mutations: an unfavorable prognostic marker in stage I lung adenocarcinoma

Activation of K-ras gene by point mutations, a common finding in lung adenocarcinomas, has been suggested to decrease patient survival. We investigated 109 lung adenocarcinomas, mostly small, peripheral, stage I tumours (81/109) for presence of K-ras gene mutations at codons 12 and 13. Mutations were detected by denaturing gradient gel electrophoresis analysis of specific sequences amplified by polymerase chain reaction from DNA extracted from archival pathological material. Thirty-three of 109 (30.3%) tumours showed mutations at codon 12 (28/33, 84.8%) or 13 (5/33, 15.2%) of the gene. Mutations and type of nucleotide substitutions were differently distributed among cytological subtypes, being more prevalent among less differentiated (G2 and G3) tumours and among bronchial than bronchiolo-alveolar type adenocarcinomas. Survival analysis showed an adverse effect of K-ras mutation on survival, restricted to stage I tumours. Median survival for 81 stage I patients was 30 months for non-mutated tumours versus 20 months for mutated tumours (p = 0.016). Multivariate analysis showed that age of patient (p = 0.001) and K-ras mutation status (p = 0.04) were the only independent factors influencing survival significantly. These data strengthen the hypothesis that K-ras gene mutations may be useful in identifying a subgroup of patients with poor outcome.     

A study on the mechanical strength of Fe2O3/Cr2O3/CuO catalyst for high temperature water gas shift reaction

Journal of Porous Materials - The present study aims to investigate the effects of iron (hydr)oxide phases formed during precipitation and the addition of different binders on the mechanical and...     

Improvement of porous polyvinylidene fluoride-co-hexafluropropylene hollow fiber membranes for sweeping gas membrane distillation of ethylene glycol solution

Porous polyvinylidene fluoride-co-hexafluropropylene (PVDF-HFP) hollow fiber membranes were fabricated through a wet spinning process. In order to improve the membrane structure, composition of the polymer solution was adjusted by studying ternary phase diagrams of polymer/solvent/non-solvent. The prepared membranes were used for sweeping gas membrane distillation (SGMD) of 20 wt% ethylene glycol (EG) aqueous solution. The membranes were characterized by different tests such as N₂ permeation, overall porosity, critical water entry pressure (CEP_w), water contact angle and collapsing pressure. From FESEM examination, addition of 3 wt% glycerol in the PVDF-HFP solution, produced membranes with smaller finger-likes cavities, higher surface porosity and smaller pore sizes. Increasing the polymer concentration up to 21 wt% resulted in a dense spongy structure which could significantly reduce the N₂ permeance. The membrane prepared by 3 wt% glycerol and 17 wt% polymer demonstrated an improved structure with mean pore size of 18 nm and a high surface porosity of 872 m^-1. CEP_w of 350 kPa and overall porosity of 84% were also obtained for the improved membrane. Collapsing pressure of the membranes relatively improved by increasing the polymer concentration. From the SGMD test, the developed membrane represented a maximum permeate flux of 28 kg·m^-2·h^-1 which is almost 19% higher than the flux of plain membrane. During 120 h of a long-term SGMD operation, a gradual flux reduction of 30% was noticed. In addition, EG rejection reduced from 100% to around 99.5% during 120 h of the operation.     

Natural killer or T-lymphocyte cells: Which is the best immune therapeutic agent for cancer? An optimal control approach

Therapeutic vaccines are being developed as a promising new approach to treatment for cancer patients. There are still many unanswered questions about which kind of therapeutic vaccines are the best for the cancer treatments? In this paper we consider a mathematical model, in the form of a system of ordinary differential equations (ODE), this system is an example from a class of mathematical models for immunotherapy of the tumor that were derived from a biologically validated model by Lisette G. de Pillis. The problem how to schedule a variable amount of which vaccines to achieve a maximum reduction in the primary cancer volume is consider as an optimal control problem and it is shown that optimal control is quadratic with 0 denoting a trajectory corresponding to no treatment and 1 a trajectory with treatment at maximum dose along that all therapeutics are being exhausted. The ODE system dynamics characterized by locating equilibrium points and stability properties are determined by using appropriate Lyapunov functions. Especially we attend a parametric sensitivity analysis, which indicates the dependency of the optimal solution with respect to disturbances in model parameters.     

Synthesis a Petri net based control model for a FMS cell

Petri nets have been recognised as a high level formal and graphical specification language for modelling, analysis, and control of concurrent asynchronous distributed systems. This paper presents a PN model, synthesised by an extended version of the knitting synthesis technique. This method, as an incremental design approach, establishes the conditions under which the fundamental behavioural properties of the synthesised systems are fulfilled and preserved. That is, the synthesised models are live, bounded, and reversible (cyclic). A Petri net with the aforementioned properties is called a well-behaved Petri net system which is guaranteed to operate in a deadlock-free, stable, and cyclic fashion. Well-behaved Petri net models, synthesised using the proposed method can be compiled into control codes and implemented as real-time controllers for flexible manufacturing systems. The significance of this paper is due to the application of an extended version of knitting synthesis technique to a real life example of a flexible manufacturing system.     

Synthesis of Cellulose-graft-Polychloromethylstyrene-graft-Polyacrylonitrile Terpolymer/Organoclay Bionanocomposite by Metal Catalyzed Living Radical Polymerization and Solvent Blending Method

A bionanocomposite of grafted cellulose and organo-modified clay was synthesized through solution intercalation method. For this purpose, chloromethylstyrene was grafted onto cellulose using acryloylchloride and the subsequent free radical polymerization. The synthesized cellulose-graft-polychloromethylstyrene was used as an atom transfer radical polymerization macroinitiator of acrylonitrile in the presence of CuCl/2,2′-bipyridine catalyst system, to prepare the cellulose-graft-polychloromethylstyrene-graft-polyacrylonitrile terpolymer. For preparing the modified clay, Na-montmorillonite was mixed with hexadecyl trimethyl ammonium chloride salt. Finally, cellulose-graft-polychloromethylstyrene-graft-polyacrylonitrile/organoclay bionanocomposite was prepared in CCl₄ by solution intercalation method.     

Synthesis of water dispersible reduced graphene oxide via supramolecular complexation with modified β-cyclodextrin

A noncovalent functionalization of the edges of reduced graphene oxide (RGO) with β-cyclodextrin-graft-hyperbranched polyglycerol (β-CD-g-HPG) was successfully performed via a host-guest interaction. The results showed that β-CD-g-HPG disperses the graphene sheets better than pure β-CD or HPG. The resulted supramolecular structure is stable in neutral water medium more than one week. However, in acidic medium the host-guest interaction is collapsed and graphene nanosheets precipitate.     

Polyamide 6–Cellulose Composites: Effect of Cellulose Composition on Melt Rheology and Crystallization Behavior

Melt rheology and crystallization behavior of polyamide 6 (PA 6) and microcrystalline cellulose (MCC) composites were systematically studied in this research. The incorporation of MCC into the PA 6 matrix resulted in higher complex viscosities (|η*|), storage modulus (G′), and shear viscosities than those of neat PA 6, especially at low frequencies. The orientation of rigid molecular chains in the composites introduced by the addition of MCC induced a strong shear thinning behavior with an increase in MCC loading. The non‐isothermal crystallization kinetics of PA 6 and MCC composites were investigated by differential scanning calorimetry. The Avrami and Tobin model were applied to describe the process of non‐isothermal crystallization and to determine the crystallization parameters of the composites. Analysis of the crystallization kinetics indicated that the Avrami (n_a) and Tobin exponent (n_t) was altered by the MCC. It was also found that the Avrami and Tobin equations fit the empirical data well. POLYM. ENG. SCI., 54:739–746, 2014. © 2013 Society of Plastics Engineers     

The effect of nanoclay and MWNT on fire‐retardency and mechanical properties of unsaturated polyester resins

The influence of nanomaterials such as Multi‐Walled Carbon NanoTubes (MWNT) and organoclay (Cloisite 30B) on the physical and mechanical properties of thermoset matrix such as Unsaturated Polyester (UP) resins is investigated. Although styrene containing UP resins have a wide spread application in industry, lack of information exists regarding the behavior of MWNT/organoclay/polyester ternary nanocomposite systems. The main aim of this research was first to evaluate the effect of nanofiller on the flammability of UP resins and, second, to characterize their mechanical properties such as toughness and their tensile strength. The rheological studies showed shear thinning for samples of UP resins containing MWNT and Cloisite 30B. The cone calorimetry measurement was used to evaluate the flame‐retardency, the gas emission of the nanocomposite and whether or not this system can be designated as a nanocomposite. This was understood in the test by the peak heat release rate being lowered and shifted to shorter times. Furthermore, the tensile and impact properties of samples were evaluated. The obtained results indicated that nanofiller particles caused both increase and decrease in the impact and tensile strength. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012