A stochastic realization algorithm via block LQ decomposition in Hilbert space

A stochastic realization problem of a stationary stochastic process is re-visited, and a new stochastically balanced realization algorithm is derived in a Hilbert space generated by second-order stationary processes. The present algorithm computes a stochastically balanced realization by means of the singular value decomposition of a weighted block Hankel matrix derived by a “block LQ decomposition”. Extension to a stochastic subspace identification method explains how the proposed abstract algorithm is implemented in system identification.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Preparation and Luminescence Spectra of Calcium- and Rare-Earth (R = Eu, Tb, and Pr)-Codoped α-SiAlON Ceramics

Rare-earth-doped oxynitride or nitride compounds have been reported to be luminescent and may then serve as new phosphors with good thermal and chemical stabilities. In this work, we report the photoluminescence (PL) spectra of europium-, terbium-, and praseodymium-doped Ca-α-SiAlON ceramics. The highly dense ceramics were prepared by hot pressing at 1750°C for 1 h under 20 MPa in a nitrogen atmosphere. Europium-doped Ca-α-SiAlON displayed a single broad emission band peaking at λ= 550–590 nm depending on the europium concentration. The emission bands in the spectra of europium-doped Ca-α-SiAlONs were assigned to the allowed transition of Eu²⁺ from the lowest crystal field component of 4 f ⁶5 d to ⁸S_7/2 (4 f ⁷) ground-state level. The emission spectra of terbium- and praseodymium-doped Ca-α-SiAlON ceramics both consisted of several sharp lines, which were attributed to the ⁵D₄→⁷F _j ( j = 3, 4, 5, 6) transitions of Tb³⁺ and ³P₀→³H _j ( j = 3, 4, 5) transitions of Pr³⁺, respectively. In particular, the terbium-doped α-SiAlON ceramics showed a strong green emission among these phosphors.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Rates for intramolecular excimer formation of poly(α-methylstyrene) measured by using picosecond pulse radiolysis

Summary The rate constants for intramolecular excimer formation, k_DM, of poly(α-methylstyrene) with different molecular weight were determined by using picosecond pulse radiolysis. Values of k_DM for poly(α-methylstyrene) are a little smaller than those for polystyrene with nearly same molecular weight. It appears to be mainly due to steric hindrance by methyl substituent of main chain.     

Stability of tetragonal ZrO2 phase in Al2O3 prepared from Zr-Al organometallic compounds

Zr-Al organometallic compounds have been spray-dried and heated at temperatures 600 to 1400°C to prepare ZrO₂-Al₂O₃ composite powders. The powders consist of balloon-like particles 0.5 to 2 m in diameter with homogeneously dispersed tetragonal ZrO₂ grains 0.1 to 0.2 m in diameter. The tetragonal fraction of ZrO₂ in the composite powders is higher than that in the powders prepared from sols of Zr(OBuⁿ)₄ and Al[OCH(CH₃)₂]₃. The fraction is affected by the organofunctional group in the Zr-Al compounds.Zr(OBuⁿ)₄ = Zr(OC₄Hgⁿ)₄; Al[OCH(CH₃)₂]₃ = Al(OPrⁱ)₃.     

Different support effect of M/ZrO2 and M/CeO2 (M = Pd and Pt) catalysts on CO adsorption: A periodic density functional study

CO adsorption over Pd₄ and Pt₄ cluster supported by c-ZrO₂(1 1 1) and CeO₂(1 1 1) catalyst systems was investigated using periodic density functional method in order to clarify the support effect on CO activation. We found that the support increases the CO activation for bridge and three-fold sites but decreases for the atop site. Moreover, it was found that the support changes the site preference for the CO adsorption. Bridge site on both the Pt₄/c-ZrO₂ and Pt₄/CeO₂ show larger CO adsorption energies than those on the other sites while the atop site is energetically preferable on isolated Pt₄ cluster. c-ZrO₂ supported Pd shows the largest CO activation with large charge transfer from the catalyst to the CO molecule. This reveals that ZrO₂ supported Pd can be a good catalyst for CO activation because of its higher probability to the three-fold site CO adsorption. We also found that positively charged M₄ clusters on the support keep their strong electron-donating properties and have enough charge density to contribute to the activation of an adsorbed CO molecule by a charge transfer.