La distribucion hipergeometrica como binomial de poisson

Resumen En este trabajo demostramos que toda distribución hipergeométricaH(N, X,n) puede ser descrita como suma de pruebas independientes con probabilidades de éxito distintas entre sí. Tal distribución recibe habitualmente el nombre de binomial de Poisson o binomial generalizada.      

Adequacy of medical referrals to hospital emergency service

OBJECTIVE: To assess the correctness and diagnostic concordance in referrals of patients to hospital Casualty Departments (CD); and the possible differences between rural and urban health centres (HC) as well as between general practitioners (GP) and family and community medicine (FCM) specialists. DESIGN: Observational study of a crossover nature. SETTING: Health area 1 in the province of Badajoz. PATIENTS AND OTHER PARTICIPANTS: 800 patients, referred to their local hospital Casualty Department. MEASUREMENTS AND MAIN RESULTS: 50.5% of all referrals were considered justified. 15.1% of the patients referred were admitted to hospital. 50.7% of referrals from GPs were found to be correct, against 47% from FCM specialists; and 49% of those referred from rural HCs were correct, as against 45.9% of those referred from urban HCs (no significant differences). Only 54% of referrals had a diagnostic hypothesis, with diagnostic concordance at 50%. There was diagnostic concordance in 28.1% of GP referrals, against 33.3% of FCM specialists; and in 27.5% of those from rural HCs against 26.1% from urban HCs (no significant differences). CONCLUSIONS: We found no differences in the correctness of referrals or diagnostic concordance of patients seen in the CD of our city's health area, neither between patients referred from rural and urban HCs, nor between patients referred by GPs and FCM specialists.     

Fatty acid esters with short‐chain alcohols in two‐phase olive pomace oils

Two‐phase decanter olive pomace (TPOP) is the by‐product of a centrifugation system, used to produce olive oil, that separates olive oil and moist pomace. The water content in these olive pomaces is about 70%, while it was 45‐50% in the olive pomace stemming from three‐phase systems (oil, water, and pomace) and 30% in the old press system. The aim of this work is focused on quantification and changes undergone during olive pomace storage in ponds of esters of fatty acids with short‐chain linear alcohols, which can be considered as a refining loss. The results indicate that oil deterioration increases very rapidly, in particular when oil is extracted from the TPOP surface. Special attention should be paid to the storage of TPOP, establishing a maximum of 2 months in all cases.     

Electron spin resonance studies of interactions of ammonia,copper, and cupriammonia with cellulose

The electron spin resonance spectra (ESR) of complexes of copper with fibrous cotton cellulose under various experimental conditions were determined. Cupric ions dissolved in solutions of strong bases, such as concentrated ammonium hydroxide, sodium hydroxide, and potassium hydroxide, formed complexes with fibrous cotton cellulose. These complexes had paramagnetic resonance properties and generated characteristic ESR spectra. Cupric ions dissolved in solutions of highly ionized neutral salts, such as sodium chloride, formed complexes with cellulose. These complexes also generated the same characteristic ESR spectra as the complexes formed in solutions of strong base. The reaction between cupric ions and cellulose was evidently very rapid and reversible. When the concentration of ammonia was decreased in, or ammonia was removed from, the cupric ion–ammonium hydroxide–cellulose complexes, the paramagnetic resonance properties of the complex were decreased or lost. Similar results were received when potassium hydroxide was removed from the complexes. The compositions of the complexes evidently are variable, that is, under different experimental conditions the relative intensities of the lines of the ESR spectra of the complexes varied, although the hyperfine splittings of the lines were constant. It was concluded that reactions of cupric ions to form complexes with adjacent hydroxyl groups on the cellulose molecule depended on an optimum spatial arrangement of the hydroxyl groups, that is, distance between the groups. Evidently, wetting of cotton cellulosic fibers with solutions of strong bases or neutral salt allowed rotation about the C₂–C₃ bond to yield this optimum arrangement. When the base or salt was removed, rotation occurred to give less favorable positions of the hydroxyl groups for complexing with cupric ions.     

SEBS elastomers for fabrication of microfluidic devices with reduced drug absorption by injection molding and extrusion

The majority of microfluidic devices used for cell culture, including Organ-on-a-Chips (Organ Chips), are fabricated using polydimethylsiloxane (PDMS) polymer because it is flexible, optically clear, and easy to mold. However, PDMS possesses significant challenges for high volume manufacturing and its tendency to absorb small hydrophobic compounds limits its usefulness as a material in devices used for drug evaluation studies. Here, we demonstrate that a subset of optically clear, elastomeric, styrenic block copolymers based on styrene-ethylene-butylene-styrene exhibit reduced absorption of small hydrophobic molecules and drug compounds compared to PDMS and that they can be fabricated into microfluidic devices with fine features and the flexibility required for Organ Chips using mass production techniques of injection molding and extrusion.     

Luminescent properties and energy transfer processes of co-doped Yb–Er poly-crystalline YAG matrix

A poly-crystalline YAG matrix was obtained through the precipitation method; this matrix was single and co-doped with ytterbium and erbium ions, i.e., Yb:YAG, Er:YAG and Yb,Er:YAG. It is found that the measured luminescent properties are similar to those reported for a mono-crystal YAG matrix. In addition, by studying the energy transfer processes in co-doped samples, it is shown that at high erbium concentrations the red emission is enhanced through an up-conversion process that takes place from the ⁴I_13/2 to the ⁴F_9/2 state of erbium ions. This enhanced red emission becomes comparable in intensity to the observed green emission and occurs by pumping at 800 nm through a back energy transfer process.     

A multiobjective GRASP–VND algorithm to solve the waste collection problem

In this paper, the waste collection problem (WCP) of a city in the south of Spain is addressed as a multiobjective routing problem that considers three objectives. From the company's perspective, the minimization of the travel cost is desired as well as that of the total number of vehicles. Additionally, from the employee's point of view, a set of balanced routes is also sought. Four variants of a multiobjective hybrid algorithm are proposed. Specifically, a GRASP (greedy randomized adaptive search procedure) with a VND (variable neighborhood descent) is combined. The best GRASP–VND algorithm found is applied in order to solve the real‐world WCP of a city in the south of Spain.     

An improved algorithm for the three‐fluid‐phase VLLE flash calculation

The VLLE flash is important in water and hydrocarbons mixtures, hydrocarbon and CO₂ rich mixtures, and hydrocarbon methane rich mixtures that are encountered in reservoir performance and recovery studies. A robust VLLE flash algorithm is proposed. The equilibrium and mass balance equations are solved as a constrained minimization problem. An inverse barrier function is used to handle the inequality constrains to solve for the phase fractions. It warrants always arriving to the solution. The challenging cases analyzed showed that the initialization procedure proposed, together with successive substitution iteration in the outer loop, is a good method for a stable VLLE flash algorithm, even near critical points. Whenever the result is in the region outside the three‐phase physical domain, the solution suggests that the system has fewer phases. In one of the cases analyzed, a region with three liquid phases was encountered and the algorithm found two different solutions with positive phase fractions. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3081–3093, 2015     

TiO2/clinoptilolite composites for photocatalytic degradation of anionic and cationic contaminants

The present work aims to study the bulk and surface properties of the TiO₂/clinoptilolite composite on the crystalline structure, superficial area, bandgap energy, zeta potential, particle size distribution, and chemical composition; in order to analyze the effect of the clinoptilolite proportion in the photocatalytic degradation of pollutants. TiO₂/clinoptilolite composites were prepared by adding different mass proportions of clinoptilolite to a sol–gel bath containing TiCl₄ as the titania precursor. Surface charge studies explain the larger sensitivity to composite ratio observed in the photocatalytic degradation of anionic pollutants than in cationic dyes. An optimum TiO₂/clinoptilolite ratio of 90/10 was found to be the most efficient in terms of lower tendency to agglomeration, largest surface area, and increased crystallite size. Improvement in composite surface area occurs only at low clinoptilolite wt% and seems to be caused by lower agglomeration of nanometric TiO₂ and acid-induced porosity in the zeolite.     

Extraction and microencapsulation of bioactive compounds from pomegranate (Punica granatum var. Wonderful) residues

Pomegranate peels and seeds are industrial residues considered interesting sources of punicalagin (PU) and punicic acid (PA), respectively. To optimise their extraction process and protect them against environmental factors, pomegranate residues were extracted with supercritical CO₂ (SC‐CO₂) using a Box–Behnken design and then optimal extracts encapsulated by spray‐drying applying a 2² central composite design. Peel extracts showed a PU content of 0.4–9.5% with optimal extraction conditions of 400 bar, 43 °C and 20% ethanol. On the other hand, SC‐CO₂ seed extracts showed a PA content of 65.1–78.4% with 450 bar, 48 °C and 10% ethanol as optimal extraction parameters. Otherwise, the encapsulation efficiency of SC‐CO₂ extracts was significantly affected by core/wall material ratio and its quadratic effect. This parameter ranged from 35.1% to 72.4% for peel extracts and from 68.2% to 92.7% for seed extracts. Results showed that the proposed technologies are a feasible approach to the integral utilisation of residues from the pomegranate industry.