Angular memory and frequency interferometry for mean heightprofiling of a rough surface

The polarimetric angular memory effect is applied to obtain the average topographic height of a rough surface. This novel effect improves the height sensitivity while maintaining a good degree of correlation between the sensors. By using a reference flat surface, the interferometric phase is linearly related to the mean topographic height. The combination of angular memory and wideband frequency interferometry (AMFI) is realized and offers a means to design a robust interferometric system. Extension of the technique to the pulse scattering problem is studied through the two-frequency mutual coherence function, and its time-domain transform provides an equivalent way to obtain the mean topographic height by combining both spatial and temporal diversity. Millimeter-wave (MMW) experiments are conducted with rough surfaces of different statistics and scattering media of different types (gravel, sand, and rough surfaces) to prove the effectiveness of the technique     

Production of finely ground natural graphite particles with high electrical conductivity by controlling the grinding atmosphere

Natural graphite particles with high crystallinity sieved to obtain a particle size range of under 63 μm were ground with a ball mill, under various well-controlled grinding atmospheres such as N₂, O₂, He, H₂, and vacuum. The ratio, X_dif50/X_st50, i.e. between the 50 wt.% Stokes diameter and the 50 wt.% laser diffraction diameter, of the ground particles, was used as an index of the flakiness of the particles. The specific resistance of films composed of the ground graphite particles was systematically measured. The rate of reduction in the size of the particles by grinding was slow under an O₂-rich atmosphere such as 100% O₂ and dry air. On the other hand, it was relatively fast in vacuum, or under an N₂ or He atmosphere, and a gas mixture of 99% N₂ and 1% O₂. The rate of size reduction by grinding under a H₂ atmosphere was intermediate. In our experimental conditions, the flakiness of the ground particles increased with the decrease in the particles’ sizes. The electrical conductivity of the ground particles, however, tended to decrease with the decrease in their sizes. Under the condition that the Stokes diameter of the ground particles remains constant, the electrical conductivity of films made from the ground particles increases with the increase in the flakiness of the particles. It was finally determined from our systematic grinding experiments that small flaky particles, which had a size, X_st of ∼1 μm, with a high electrical conductivity can be produced by grinding in a gas mixture of 99% N₂ and 1% O₂. In this case, the flaky shape of the ground particles was visually confirmed by scanning electron microscopy.     

Multiphase composites of tetragonal zirconia agglomerate dispersed into alumina and alumina-zirconia matrices

Multiphase composites of yttria- and ceria-doped tetragonal zirconia agglomerates (10–50 m) dispersed into an alumina or alumina-zirconia matrix were sintered at 1500–1600 °C in air, followed by post-Hot Isostatic Pressing (HIP) at 1450°C and 150 MPa in an Ar gas atmosphere. The relative density of the recovered composites was above 98% of the theoretical density. By chemically etching on the surface of zirconia agglomerates, the sinterability of composites was apparently improved; and no microcracks nor pores were observed at the interface of agglomerate and matrix. According to scanning electron microscopy (SEM) observation, tetragonal and tetragonal-monoclinic zirconia agglomerates were highly dispersed into the alumina or alumina-zirconia matrix. The multiphase composites containing 10 vol% spherical agglomerates demonstrate the relatively low value of bending strength, < 400 MPa, and a high value of fracture toughness, > 11 MPa m^1/2. The crack propagation introduced by Vickers indentation was efficiently suppressed and deflected by the agglomerates.     

Role of granulosa and theca cell interactions in ovarian follicular maturation

We developed a culture system in which two types of ovarian follicular cells were allowed to attach to opposite sides of a collagen membrane. Using this in vitro cell culture system, we studied the effects of granulosa- and theca-cell interaction on the morphology, structure, and function of bovine ovarian follicular cells. In the first part of the study, we explored how the interaction between theca and granulosa cells affects the morphology and structure of the cells. This study was done using follicular cells collected from bovine ovarian follicles at the early developmental stage. Granulosa cells cultured alone were flattened, and formed a monolayer sheet. By contrast, granulosa cells cultured with theca cells were convex, and formed multilayer sheets. Theca cells cultured alone were thin, flat, and spindle-shaped. Theca cells cultured with granulosa cells were also spindle-shaped; however, they appeared convex and more densely packed when compared with theca cells cultured alone. In the second part of the study, the possible role of the cellular interaction in the control of differentiation and growth of granulosa and theca cells was investigated. When follicular cells were isolated from the early stage of follicular development, theca cells reduced progesterone and inhibin production by granulosa cells and augmented the growth of granulosa cells. When the cells were isolated from the late stage of follicular development, by contrast, theca cells augmented hormonal production by granulosa cells, and did not affect the growth of granulosa cells. The growth and androstenedione production by theca cells were increased by the presence of granulosa cells, irrespective of the origin of follicular cells. These results demonstrated that communication between two types of follicular cells results in reciprocal modulation of their morphology, structure, growth, and function. Cellular interactions seem to be one of the major factors controlling the differentiation and growth of the follicular cells during the follicular maturation process. In contrast to granulosa and theca cells cultured alone, cells in the coculture seemed to possess morphological and functional characteristics more similar to those of cells in the growing follicular wall in vivo. Thus, we speculate that the interaction between these two types of follicular cells is essential for the maintenance of original structure and function of the bovine follicular wall.     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.     

Peracetic acid as a single endodontic irrigant: effects on microhardness,roughness and erosion of root canal dentin

The aim was to assess the effects of 1% peracetic acid (PAA) as a single endodontic irrigant on microhardness, roughness, and erosion of root canal dentin, compared with 2.5% sodium hypochlorite (NaOCl) and with 2.5% NaOCl combined with 17% EDTA. Forty human, single‐rooted tooth hemisections were submitted to Knoop microhardness test, before and after the following irrigation protocols: PAA = 1% PAA; NaOCl = 2.5% NaOCl; NaOCl‐EDTA‐NaOCl = 2.5% NaOCl +17% EDTA +2.5% NaOCl; and SS = saline. Another 40 roots were instrumented, irrigated with the same protocols, and sectioned longitudinally. The roughness analysis was performed on the mesial section using a confocal laser scanning microscope, whereas erosion was analyzed on each third of the distal section, using a scanning electron microscope. The data were analyzed using ANOVA and Tukey post‐tests, and Kruskal‐Wallis and Dunn post‐tests (α = .05). The PAA and NaOCl‐EDTA‐NaOCl groups showed no significant differences (p > .05); both promoted reduction in microhardness and increase in roughness, compared with the NaOCl and SS groups (p < .05). NaOCl‐EDTA‐NaOCl promoted higher erosion in the cervical and middle thirds than the other groups (p < .05); there was no difference among PAA, NaOCl, and SS (p > .05). There was also no difference among the groups regarding the apical third (p > .05). PAA used as a single endodontic irrigant caused reduction in root canal dentin microhardness and increase in roughness in a similar way to NaOCl‐EDTA‐NaOCl; however, PAA caused less erosion than NaOCl‐EDTA‐NaOCl.     

Hiding an image with a light-scattering medium and use of a contrast-discrimination method for readout

Hiding image data with a material such as a light-scattering medium is useful as an initial stage of data protection, because the hidden image can be detected only by observation with a specific technique. A light-scattering medium is used to hide the image data, and a low-temporal-coherence interferometer performs the readout processing. A new readout method for detecting pixel values of the image is proposed to overcome spatial variation of the light intensity and distortion of the interference fringes. The introduction of spatial coding further improves the performance by overcoming spatial variations of the light-scattering medium and variations in the reflectance of given pixels.     

Polymer effect in electrochromic behavior of oligomeric viologens

A series of oligomeric viologens were synthesized in order to investigate the polymer effect in electrochromic behavior of viologen compounds. These materials have a lower first-step reduction potential and a higher second-step reduction potential compared with monomeric viologens. As a result, they have wider potential separation, where stable viologene radical salts are produced. Spectroscopic analysis suggests that stable monomeric viologen radical salts do not exist in water, but there is some intramolecular interaction between viologen radicals of the oligomers. This intramolecular interaction is responsible for the reduction behavior and the stability of radical films of oligomeric viologens.     

Polarized pulse waves in random discrete scatterers

In recent years there has been increasing interest in the use of polarization for imaging objects in a cluttered environment. Examples are optical imaging through clouds, optical detection of objects in a biological medium, and microwave detection of objects in clutter. We extend previous studies of continuous-wave scattering to pulse-polarization scattering in discrete scatterers. We solve the time-dependent vector radiative transfer equation for a plane-parallel medium by using Mie scattering and the discrete ordinates method. The time-dependent degree of polarization and cross-polarization discrimination are calculated and verify the advantages of circular over linear polarization in maintaining greater copolarized components rather than cross-polarized components.     

A 20 GHz Steerable Array Antenna Using 3-bit Dielectric Slab Phase Shifters on a Coplanar Waveguide

A simple steerable array antenna is designed and developed using a movable dielectric phase shifter. The change of effective dielectric constant at different dielectric slab positions on a coplanar waveguide is used as the phase shifter. The impedance matching and desired phase shift conditions are satisfied at two slab heights, and the reflection is designed to be minimized at these slab positions. The low-loss dielectric material is used as the dielectric slab and is placed close to a coplanar transmission line with airgap. The 4times4 steerable array antenna with the phase shifters is designed and fabricated at 20 GHz. The H-plane radiation patterns are measured at different phase shift positions and compared with the expected results