Optically Tunable Nonlinearities in Polymers Based on Photoisomerizable Metal‐Based Coordination Complexes

The bottom‐up design of polymer films exhibiting quadratic nonlinear optical properties that can be tuned optically and chemically is described. The polymer matrices are doped with metal‐containing chromophores built around a Zn^II core and photoisomerizable ligands with two different geometries. These molecules possess specifically designed photophysical and nonlinear optical properties to be used towards all‐optical poling, an interference process between one‐ and two‐photon excitations that locally induces macroscopic second‐order effects in polymer films. It is shown that grafting the molecules onto the polymer chains improves the stability of the macroscopic photoinduced nonlinearity in the films.     

Performance of solvothermally prepared Ga2O3-Al2O3 catalysts for SCR of NO with methane

The solvothermal reaction of mixtures of aluminum isopropoxide (AIP) and gallium acetylacetonate (Ga(acac)₃) directly yielded the mixed oxides of γ-Ga₂O₃-Al₂O₃. In the solvothermal synthesis, the crystal structure of mixed oxides was controlled by the initial formation of γ-Ga₂O₃ nuclei. The mixed oxides prepared in diethylenetriamine have extremely high activities for selective catalytic reduction (SCR) of NO with methane as a reducing agent. With increasing crystallite size of the spinel structure, the catalytic activity increased. The ratio of the amount of methane consumed by combustion to total methane conversion was proportional to the density of acid sites on the surface of the mixed oxides. The mixed oxide catalysts prepared in diethylenetriamine had lower densities of acid sites and showed a higher methane-efficiency for CH₄-SCR than those prepared in other solvents. These catalysts maintained their high activity even when the reaction was carried out under the severe conditions (i.e., high space velocity and low NO concentration).     

In situ measurements of ion-exchange processes in single polymer particles: laser trapping microspectroscopy and confocal fluorescence microspectroscopy

Ion-exchange processes of a cationic dye (Rhodamine B; RhB) were studied for individual polymer particles (diameter of 16-20 μm) by laser trapping microspectroscopy and confocal fluorescence laser microspectroscopy. The absorbance of RhB at 565 nm adsorbed on a cation-exchange particle increased linearly with the concentration of RhB in the aqueous phase, while it was independent of the particle diameter. Fluorescence intensity profile measurements of RhB along the particle diameter by confocal fluorescence microspectroscopy directly proved that ion exchange took place in the surface layer (～2-μm thickness) of the particle in the initial stage (1 h). Diffusion of RhB in the particle was very slow, and ion exchange proceeded gradually to the inner volume in the order of days. The ion-exchange processes were analyzed on the basis of simulation of the time course of the concentration profile of RhB in the particle, and the diffusion coefficient of RhB was determined to be (2-4) × 10(-11) cm(2)·s(-1).     

A high‐performance sorting algorithm for multicore single‐instruction multiple‐data processors

Many sorting algorithms have been studied in the past, but there are only a few algorithms that can effectively exploit both single‐instruction multiple‐data (SIMD) instructions and thread‐level parallelism. In this paper, we propose a new high‐performance sorting algorithm, called aligned‐access sort (AA‐sort), that exploits both the SIMD instructions and thread‐level parallelism available on today's multicore processors. Our algorithm consists of two phases, an in‐core sorting phase and an out‐of‐core merging phase. The in‐core sorting phase uses our new sorting algorithm that extends combsort to exploit SIMD instructions. The out‐of‐core algorithm is based on mergesort with our novel vectorized merging algorithm. Both phases can take advantage of SIMD instructions. The key to high performance is eliminating unaligned memory accesses that would reduce the effectiveness of SIMD instructions in both phases. We implemented and evaluated the AA‐sort on PowerPC 970MP and Cell Broadband Engine platforms. In summary, a sequential version of the AA‐sort using SIMD instructions outperformed IBM's optimized sequential sorting library by 1.8 times and bitonic mergesort using SIMD instructions by 3.3 times on PowerPC 970MP when sorting 32 million random 32‐bit integers. Also, a parallel version of AA‐sort demonstrated better scalability with increasing numbers of cores than a parallel version of bitonic mergesort on both platforms. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural analysis of Ti-Fe thin films prepared by pulsed laser deposition

Titanium iron oxide (Ti-Fe-O) thin films have been successfully deposited by pulsed laser deposition (PLD). Experiments were carried out by using some targets. One was a Ti-50 at.% Fe-sintered target, while the others were Ti and Fe plates with various surface area ratio [S_R=S_Fe/(S_Fe+S_Ti)] from 30 to 70%. The thin films were analyzed by X-ray diffractometry, Rutherford backscattering spectroscopy (RBS) and transmission electron microscopy (TEM). From XRD analysis, the main phase in the thin films deposited at S_R=30 and 50% was β-Ti (Fe). By increasing S_R to 70%, the main phase of the thin film changed to TiFe. By phase diagram, composition of TiFe must be between Ti-47.5-50.3 at.% Fe at a temperature of 1085 °C. However, the composition of the thin film deposited at S_R=70% was found to be Ti_0.15Fe_0.62O_0.23. Thus, the composition of Fe in the thin film was much greater than the solubility limit. This fact suggests two possibilities. One is that the thin films, which we have deposited, were in a metastable state. The other is that metal oxides of amorphous state could be contained in the thin film.     

Partial redundancy elimination for access expressions by speculative code motion

We present a new memory access optimization for Java to perform aggressive code motion for speculatively optimizing memory accesses by applying partial redundancy elimination (PRE) techniques. First, to reduce as many barriers as possible and to enhance code motion, we perform alias analysis to identify all the regions in which each object reference is not aliased. Secondly, we find all the possible barriers. Finally, we perform code motions in three steps. For the first step, we apply a non‐speculative PRE algorithm to move load instructions and their following instructions in the backwards direction of the control flow graph. For the second step, we apply a speculative PRE algorithm to move some of them aggressively before the conditional branches. For the third step, we apply our modified version of a non‐speculative PRE algorithm to move store instructions in the forward direction of the control flow graph and to even move some of them after the merge points. We implemented our new algorithm in our production‐level Java just‐in‐time compiler. Our experimental results show that our speculative algorithm improves the average (maximum) performance by 13.1% (90.7%) for jBYTEmark and 1.4% (4.4%) for SPECjvm98 over the fastest algorithm previously described, while it increases the average (maximum) compilation time by 0.9% (2.9%) for both benchmark suites. Copyright © 2004 John Wiley & Sons, Ltd.     

Development of gap sensing system for narrow gap laser welding

Narrow gap welding with an oscillation laser beam is one of the effective processes for thick plate welding. To put this welding process into practical manufacturing, a groove-sensing system using image processing for narrow gap welding with an oscillation laser beam is used. This developed system uses still images of the weld zone taken by a coaxial CMOS camera. It can recognize the position of the groove wall by analysing the brightness distribution in the still image. It can then control the oscillation width and the laser-irradiated area by calculating the groove width and the groove centre position. Some narrow gap welding experiments were performed to evaluate the performance of the developed system. The results revealed that the developed system is effective for narrow gap welding with an oscillation laser beam. Using this system, the narrow gap groove can be welded even if the groove width has changed during the welding process.