Removal of E. coli and helminth eggs in UASB: Polishing pond systems in Brazil.

Ponds following anaerobic reactors, such as Upflow Anaerobic Sludge Blanket (UASB) reactors, have been termed polishing ponds in the literature. The present paper analyses the removal of E. coli and helminth eggs in five UASB-polishing pond systems in Brazil. Since there were ponds in series, the total number of ponds was 10. The ponds had average retention times varying from 2 to 21 days, and depths ranging from 0.40 to 2.00 m. The shallow ponds in series, even with low retention times, were able to produce effluents complying with the coliform WHO guidelines for unrestricted irrigation (< or = 1000 MPN/100 ml). An equation for the coliform decay coefficient was proposed: Kb (dispersed flow) = 0.710H(-0955) (20 degrees C). The equation highlights the inverse relationship between the pond depth and the decay coefficient. All polishing pond systems were able to produce effluents with helminth eggs concentrations predominantly equal to zero, and satisfying the WHO guidelines for unrestricted and restricted irrigation (< or = 1 egg/L, arithmetic mean). The approximate range of helminth eggs removal efficiency was predicted satisfactorily.     

Non-point sources and the waste discharge charge system.

The development of a waste discharge charge system (WDCS) in South Africa has been proposed to promote waste reduction and water conservation. The WDCS is based on the polluter pays principle and is designed such that the management of waste discharges achieves resource quality objectives (RQOs) at the minimum total cost to the catchment. Two charges are distinguished: first a charge for optimising use of the resource (incentive charge); and secondly, a charge for development and operation of mitigation measures in the resource (mitigation charge). The WDCS is applied to both point sources and non-point sources (NPS) of contamination. In the inclusion of NPS, the charge system distinguishes between registered and non-registered NPS, with the charge applied to the former group only, in the first instance. This paper introduces the WDCS by describing the principles and the theoretical basis of the WDCS, highlighting the link to RQOs as the benchmark of acceptable externalities. The paper explores the inclusion of NPS in the WDCS, describing: first, the principles of NPS inclusion in the WDCS; secondly, the types of NPS included in the present version of the WDCS; thirdly, the methodology for charge estimation; and finally, non-registered NPS and their potential inclusion in future editions of the WDCS. The paper concludes with remarks and challenges facing the first edition of the WDCS.     

0.27-dB/km attenuation achieved by MSP preform process [opticalfibers]

Mechanically shaped preforms (MSP) have been demonstrated to combine economic non-CVD (chemical vapor deposition) processing and low loss, with a published value of 0.63 dB/km and a size of 30 fkm/preform. Improved processing is proposed which results in a minimum loss of 0.27 dB/km at 1550 nm. Preforms capable of yielding 150 fkm have been produced. Reboiling during preform stretching and fiber pulling is identified as the last remaining problem of the process     

A multiple-switch high-voltage DC-DC converter

Series connection of power devices has evolved into a mature technique and is widely applied in HV DC power systems. Static and dynamic voltage balance is ensured by shunting individual devices with dissipative snubbers. The snubber losses become pronounced for increased operating frequencies and adversely affect power density. Capacitive snubbers do not exhibit these disadvantages, but they require a zero-voltage switching mode. Super-resonant power converters facilitate the principle of zero-voltage switching. A high-voltage DC-DC power converter with multiple series-connected devices is proposed. It allows the application of nondissipating snubbers to assist the voltage sharing between the multiple series-connected devices and lowers turnoff losses. Simulation results obtained with a circuit simulator are validated in an experimental power converter operating with two series-connected devices. The behavior of the series connection is examined for MOSFETs and IGBTs by both experimental work with a 2 kW prototype and computer simulation. Applications can be found in traction and heavy industry, where the soft-switching power converter is directly powered from a high-voltage source     

Learning a color distance metric for region-based image segmentation

In this paper we describe an experiment where we studied empirically the application of a learned distance metric to be used as discrimination function for an established color image segmentation algorithm. For this purpose we chose the Mumford–Shah energy functional and the Mahalanobis distance metric. The objective was to test our approach in an objective and quantifiable way on this specific algorithm employing this particular distance model, without making generalization claims. The empirical validation of the results was performed in two experiments: one applying the resulting segmentation method on a subset of the Berkeley Image Database, an exemplar image set possessing ground-truths and validating the results against the ground-truths using two well-known inter-cluster validation methods, namely, the Rand and BGM indexes, and another experiment using images of the same context divided into training and testing set, where the distance metric is learned from the training set and then applied to segment all the images. The obtained results suggest that the use of the specified learned distance metric provides better and more robust segmentations, even if no other modification of the segmentation algorithm is performed.