Surface-enhanced Raman scattering substrate of silver nanoparticles depositing on AAO template fabricated by magnetron sputtering

In this report, we describe a fabrication process of low-cost and highly sensitive SERS substrates by using a simple anodizing setup and a low-energy magnetron sputtering method. The structure of the SERS substrates consists of silver nanoparticles deposited on a layer of anodic aluminum oxide (AAO) template. The fabricated SERS substrates are investigated by a scanning electron microscope (SEM), a transmission electron microscope (TEM), and a confocal Raman spectroscope. We have verified from the surface morphology that the fabricated SERS substrates consist of high-density round-shape silver nanoparticles where their size distribution ranges from 10 to 30 nm on the top and the bottom of nanopores. The surface-enhanced Raman scattering activities of these nanostructures are demonstrated using methylene blue (MB) as probing molecules. The detection limit of 10⁻⁸ M can be achieved from this SERS substrate.     

Designs and investigations of anti-glare blue-tint side-view car mirrors

Recent developments for luxury car industries have been in favor of anti-glare color-tint side-view exterior car mirrors. In this study, we explore the designs, the fabrications, and the investigations of anti-glare blue-tint samples suitable for the side-view car mirrors. With an aid of the thin film design software, the TiO₂-based backside-coated optical systems are prepared by the homemade and the retailed sputtering systems, and examined for the reflection spectra and the chromaticity diagrams. From four major designs of the anti-glare blue-tint mirrors, the ultra-thin metallic layer and the dielectric stack with the bottommost reflective layer offer the blue-tint at 85% highest reflection. Although the design requires only 40 min of the deposition time, the careful control of the ultra-thin metallic film thickness is crucial.     

Characterization of inhomogeneity in TiO2 thin films prepared by pulsed dc reactive magnetron sputtering

This article discusses an analytical method for characterizations of TiO₂ thin films and determinations of the degree of their inhomogeneity. The TiO₂ films were prepared by a pulsed dc magnetron sputtering with an operating pressure as a main experimental parameter. The obtained films were primarily characterized for film crystallinity, microstructures and optical properties by spectroscopic ellipsometry. The measured ellipsometric data were analyzed by the single-, the double, and the triple-layer models in order to match with the inhomogeneous film structure proposed in the Thornton structure zone model. The results were then compared with those obtained from grazing-incidence X-ray diffraction, field-emission scanning electron microscopy and high-resolution transmission electron microscopy. The study revealed that the pulsed dc sputtered TiO₂ films could be best described by the inhomogeneous triple-layer physical model. Although the films deposited at lower operating pressure had a dense structure with a mirror-like surface topography, the films deposited at higher operating pressure had the porous structure with the rough surface and the void.     

Activated carbons derived from sugarcane bagasse for high-capacitance electrical double layer capacitors

Activated carbon (AC) from sugarcane bagasse was prepared using a simple two-step method of carbonization and chemical activation with four different activating agents (HNO₃, H₂SO₄, NaOH, and KOH). Amorphous carbon structure as identified by X-ray diffraction was observed in all samples. Scanning electron microscopy revealed that the AC had more porosity than the non-activated carbon (non-AC). Specific capacitance of the non-AC electrode was 32.58 F g^?1 at the current density of 0.5 A g^?1, whereas the AC supercapacitor provided superior specific capacitances of 50.25, 69.59, 109.99, and 138.61 F g^?1 for the HNO₃ (AC-HNO₃), H₂SO₄ (AC-H₂SO₄), NaOH (AC-NaOH), and KOH (AC-KOH) activated carbon electrodes, respectively. The AC-KOH electrode delivered the highest specific capacitance (about 4 times of the non-AC electrode) because of its good surface wettability, the largest specific surface area (1058.53 m² g^?1), and the highest total specific pore volume (0.474 cm³ g^?1). The AC-KOH electrode also had a great capacitance retention of almost 100% after 1000 GCD cycles. These results demonstrate that our AC developed from sugarcane bagasse has a strong potential to be used as high stability supercapacitor electrode material.

     

Structural, optical and hydrophilic properties of nanocrystalline TiO2 ultra-thin films prepared by pulsed dc reactive magnetron sputtering

TiO₂ ultra-thin (15 nm) films were deposited on silicon wafers (100) and glass slides by pulsed dc reactive magnetron sputtering in an ultra-high vacuum (UHV) system. The effects of substrate temperature, from room temperature to 400 °C, on structural, optical, and hydrophilic properties of the obtained films have been investigated. The structure of the films was characterized by grazing-incidence X-ray diffraction, high-resolution transmission electron microscopy, and atomic force microscopy. The optical properties were determined by UV-vis spectrophotometer and spectroscopic ellipsometry. The hydrophilic properties of the films, after exposed to ultraviolet illumination, were analyzed from contact angle measurements. The results suggested that the substrate temperature at 300 °C was critical in the crystalline phase transformation from amorphous to anatase in the TiO₂ films. The obtained films exhibited good qualities in the optical properties, in addition to excellent photo-induced hydrophilic activities.     

Silver nanoparticles deposited on anodic aluminum oxide template using magnetron sputtering for surface-enhanced Raman scattering substrate

Low-cost and highly sensitive surface-enhanced Raman scattering (SERS) substrates have been fabricated by a simple anodizing process and a magnetron sputtering deposition. The substrates, which consist of silver nanoparticles embedded on anodic aluminum oxide (AAO) templates, are investigated by a scanning electron microscope and a confocal Raman spectroscopy. The SERS activities are demonstrated by Raman scattering from adsorbed solutions of methylene blue and pyridine on the SERS substrate surface. The most optimized SERS substrate contains the silver nanoparticles, with a size distribution of 10-30 nm, deposited on the AAO template. From a calculation, the SERS enhancement factor is as high as 8.5 × 10⁷, which suggests strong potentials for direct applications in the chemical detection and analyses.