Temperature dependence of hydrogenated amorphous silicon thin-film transistors

The temperature dependence characteristics of hydrogenated amorphous silicon thin-film transistors were investigated. The results indicate that as the temperature was increased, the threshold voltage and the field-effect mobility were first increased, and then decreased, which may be controlled by different mechanisms at low and high temperatures. In addition, if the temperature was higher than 420 K, the Fermi level was promoted to the degenerate-like states, the current channel always existed due to the temperature effect, and the threshold voltage became negative.     

Rheology of concentrated solutions of hyperbranched polyesters

The solution rheology of different generations of hyperbranched polyesters in N‐methyl‐2‐pyrrolidinone (NMP) solvent was examined in this study. The solutions exhibited Newtonian behavior over a wide range of polyester concentrations. Also, the relative viscosities of poly(amidoamine) (PAMAM) dendrimers in ethylenediamine were compared with those of the hyperbranched polyesters in NMP. Both types of dendritic polymers have relative viscosities that are exponential functions of their molar fraction in solution. The slopes of these relative viscosity curves show a linear relationship with respect to the generation number. PAMAM dendrimers have the greater slopes for each generation, reflecting their relatively larger intrinsic viscosity values.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Ergonomic Analysis of Head‐Mounted Night Vision Goggle Systems in Simulated Ground Operations

This study compared the mounting time and strain on the head‐neck while using an old model (forehead and cheek supported) and a new model (head harness supported) of head‐mounted night vision goggle systems in the postures of standing, sitting, and lying prone. The results showed that effectively reducing the mounting time was attributed to the ease and less time required for length adjustments of the head harness in the new model. The novel device received higher positive subjective ratings for convenience and comfort while wearing than did the old model. Although the weight of the new model was decreased to 0.794 kg and the length was reduced to 0.155 m, the loads on the head‐neck complex remained high. These findings suggest that a rifle should be fitted with the night vision goggle or handheld model to decrease neck‐shoulder workload if the prone position is the most frequent and important posture for soldiers. © 2011 Wiley Periodicals, Inc.     

Coarsening of δ′ (Al3Li) and composite precipitates in an Al-2.5% Li-0.15% Zr alloy

The early stage coarsening behaviour of (Al₃Li) precipitates and composite precipitates, consisting of (Al₃Zr) core enveloped by a shell, in an Al-2.5% Li-0.15% Zr alloy has been studied at 443, 473 and 503 K by conventional transmission electron microscopy using superlattice dark-field images. Coarsening kinetics of precipitates was found to exhibit considerable deviation from the t ^1/3 law corresponding to diffusion control at 473 and 503 K. This deviation may be explained either by the operation of a surface-reaction controlled coarsening mechanism represented by t ^1/2 law, or by the presence of a slower precoarsening stage preceding diffusion-controlled coarsening. The particle-size distributions of precipitates were not in accordance with either the earlier theoretical predictions or the normal distribution. They were symmetrical or slightly skewed to the left, and particle sizes twice the average were observed. The coarsening kinetics of composite precipitates, was found to be rather different from that of ; a diffusion model which yields t ^1/n law with n changing from 1/4 to 1/6 as the coarsening progresses, was predicted. The composite precipitates have exhibited quite a narrow and rather symmetrical size distribution.     

Effects of CCEP and Sc on superplasticity of Al–5.6Mg–0.7Mn alloys

Trace amount (0.3?wt%) of scandium is added to Al–5.6Mg–0.7Mn alloy to form uniformly distributed Al₃Sc precipitates for producing a fine-grained and stable microstructure at high temperature through cross-channel extrusion process. Superplasticity and hot workability of the Sc-containing Al–5.6Mg–0.7Mn alloy, after extrusion, are also examined. The result indicates that Al–5.6Mg–0.7Mn alloys with and without 0.3?wt% Sc after extrusion of six passes at 300°C, fine-grained structures were observed with grain sizes of 1–2?µm and improvement of mechanical properties. Furthermore, Al₃Sc phase can effectively retard recrystallization to increase the thermal stability and remain equiaxed. The elongation of Al–5.6Mg–0.7Mn alloy with Sc addition to failure is extended to 873% maximum at high temperature of 450°C at strain rate of 1?×?10^?1?s^?1after six passes in the CCEP.     

A new application of δ-quasi-monotone and almost increasing sequences

In Bor (2011) [5], we proved a main theorem dealing with absolute Nörlund summability factors of infinite series. In the present paper, this result has been further generalized under weaker conditions by using $\delta$-quasi-monotone sequences     

Sequential Compatibility Effects and Cognitive Control: Does Conflict Really Matter?

Although it is widely accepted that control mechanisms are necessary for human behavior to be adapted, very little is known about how such mechanisms are recruited. A suggestion to fill the gap was put forward by M. M. Botvinick, T. S. Braver, C. S. Carter, D. M. Barch, and J. D. Cohen (2001), who proposed the conflict-loop theory. This theory has been successful in accounting for the reduction of compatibility effects after an incompatible trial: The level of conflict being, on average, higher during an incompatible trial, more control occurs after such a trial. The authors have tested this prediction by sorting the trials on the basis of amount of conflict (quantified by the electromyographic activity) they presented. A reduction of the compatibility effect was observed after incompatible trials, but it was independent of the level of conflict on previous trials, suggesting that the conflict does not trigger changes in executive control. Consequences for the conflict monitoring model are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)