PROBING HIDDEN POLYMERIC INTERFACES USINGIR-VISIBLE SUM-FREQUENCY GENERATION SPECTROSCOPY

Understanding the molecular-level processes underlying interfacial phenomena is important in the area of adhesion. We briefly introduce IR-visible sum-frequency generation spectroscopy (SFG) using a total-internal-reflection geometry for the study of polymer-air, polymer-solid, and polymer-polymer interfaces. The following examples, predominantly of work done in our lab, illustrating differences in molecular structure and dynamic properties at interfaces are presented: the air- and solid-interface structure of an amorphous polystyrene (PS) and a semicrystalline polymer with side-chain crystallinity, poly(octadecyl acrylate) (PA-18); structure of a polymer-polymer interface between thin films of a semicrystalline polymer with side-chain crystallinity, poly(vinyl-N-octadecylcarbamate- co-vinyl acetate), and an amorphous PS; thermal order-to-disorder transitions of the air and solid interface of PA-18, and the interface of this polymer with PS; and dynamic surface-relaxation studies of a rubbed PS film.     

Effect of doping ferrocene in the working fluid of electrohydrodynamic (EHD) micropumps

The effect of doping ferrocene in the working fluid of electrohydrodynamic micropumps was investigated under the application of DC electric fields. The micropump consisted of 100 planar electrode pairs that were embedded along the bottom wall of a 100-micron-high, 5-mm-wide and 26-mm-long microchannel. The width of the emitter and collector electrodes was 20 and 40 µm, respectively, with inter-electrode spacing of 30 µm. A redox dopant, ferrocene, was diffused homogeneously into the working fluid HFE-7100 at 0.05, 0.1 and 0.2 % concentration by weight. The static pressure head generation and flow rate at different back pressure conditions were measured under different applied DC voltages. The current and pressure generated with the doped working fluid were significantly higher than with pure HFE-7100 under an applied DC field. A maximum static pressure of 6.7 kPa and flow rate of 0.47 mL/min at no back pressure were achieved at 700 V.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

Superconductivity and Fluctuation-Induced Conductivity (FIC) Analysis of (Cu0.5Tl0.5?x M x )Ba2Ca2Cu3O10?δ

Superconductivity has been improved by partial substitution of slightly higher electronegative (M=Bi, Hg) elements at Tl sites in (Cu_0.5Tl_0.5?x M _x )Ba₂O_4??? (x=0,0.25) charge reservoir layer of (Cu_0.5Tl_0.5?x M _x )Ba₂Ca₂Cu₃O_10??? superconductor. These samples were characterized by X-ray diffractometry, dc-resistivity, ac-susceptibility, FTIR absorption spectroscopy, and fluctuation-induced conductivity (FIC) analysis. The FIC analysis has been carried out in the light of Aslamasov?CLarkin (AL) theory on the resistivity versus temperature curves of (Cu_0.5Tl_0.5?x M _x )Ba₂Ca₂Cu₃O_10??? superconductor. The microscopic parameters such as cross-over temperature (T _o ), zero-temperature coherence length ?? _c (0), inter-layer coupling (J), and critical exponents (?? _2D and ?? _3D) have been determined from FIC analysis of these samples and tried to correlate them to the superconductivity order parameters. A?direct correlation between the cross-over temperatures (T _o ) and zero resistivity critical temperature {T _c (R=0)} and carrier concentration in these samples has been observed. The improvement in T _c (R=0) and the shift of 3D AL region to higher temperature values with the doping of Bi and Hg have also been observed.     

Electrochemical degradation of petroleum hydrocarbons (PAHS) from synthetic aqueous solutions

Water separated from crude oil and wastewater discharge from petroleum oil refineries contains significant quantity of dissolved hydrocarbons. Polycyclic aromatic hydrocarbons (PAHs) are major toxicants in wastewater of refineries. It is difficult to treat wastewater containing PAHs due to their recalcitrant property and low solubility. Conventional techniques for the treatment of wastewater are still a concern of toxicity. Electrochemical oxidation process has been found to be a favorable for treating wastewater. Electrodes with high stability and electrocatalytic activity are important factors for a successful electrochemical oxidation of toxic organics in wastewater. In this study titanium anodes were coated with tin, antimony and iridium oxide mixture from their respective salts by thermal decomposition method. FESEM and XRD used for surface characterization of Ti/SnO₂–Sb₂O₅–IrO₂ anode. Quantification of PAHs was done using GC–MS. Results confirm the presence of respective oxides on anode surface. Their electrocatalytic capability was tested for degradation of 16 priority PAHs in aqueous solution. Results reveal the complete degradation of naphthalene, acenaphthylene, acenaphthene and fluorene without using NaCl electrolyte. While in the presence of NaCl naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene were completely removed. About 98% of total PAHs removal was found at all initial pH values 3, 6, and 9 in the presence of electrolyte. Current study will be helpful in improving quality of petroleum industry wastewater containing PAHs.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Latent Semantic Kernels

Kernel methods like support vector machines have successfully been used for text categorization. A standard choice of kernel function has been the inner product between the vector-space representation of two documents, in analogy with classical information retrieval (IR) approaches.Latent semantic indexing (LSI) has been successfully used for IR purposes as a technique for capturing semantic relations between terms and inserting them into the similarity measure between two documents. One of its main drawbacks, in IR, is its computational cost.In this paper we describe how the LSI approach can be implemented in a kernel-defined feature space.We provide experimental results demonstrating that the approach can significantly improve performance, and that it does not impair it.     

Some Implications of a Sample of Practical Turing Tests

A series of imitation games involving 3-participant (simultaneous comparison of two hidden entities) and 2-participant (direct interrogation of a hidden entity) were conducted at Bletchley Park on the 100th anniversary of Alan Turing’s birth: 23 June 2012. From the ongoing analysis of over 150 games involving (expert and non-expert, males and females, adults and child) judges, machines and hidden humans (foils for the machines), we present six particular conversations that took place between human judges and a hidden entity that produced unexpected results. From this sample we focus on features of Turing’s machine intelligence test that the mathematician/code breaker did not consider in his examination for machine thinking: the subjective nature of attributing intelligence to another mind.