Involution of the bovine mammary gland: histological and ultrastructural changes

Bovine mammary tissue was collected by surgical biopsy at intervals during involution for histological and ultrastructural observation. In lactating tissue (d 0 of involution, collected 8 h after the final milking), alveolar epithelial cells had marked ultrastructural evidence of lactation, including protein-containing secretory vesicles, lipid droplets, extensive rough endoplasmic reticulum, and numerous mitochondria. By d 2 of involution, alveolar epithelial cells contained large vacuoles apparently formed by coalescing of protein-containing secretory vesicles and lipid droplets. Large vacuoles were observed in epithelial cells until about the 3rd wk of involution. By d 2 of involution, the Golgi apparatus generally was not apparent. Rough endoplasmic reticulum and mitochondria were observed throughout the period studied, although in reduced amounts compared with their presence in lactating tissue. A marked increase in lysosomal or cytosegresomal structures in epithelial cells was not observed. There was no evidence of extensive sloughing of epithelial cells from the basement membrane. There was a progressive increase in the interalveolar area and a concurrent decrease in the alveolar luminal area as involution progressed. Ultrastructural examination showed that alveolar epithelial cells at d 21 and 30 of involution appear to be functionally active but not secreting milk components.     

(+)-CC-1065 as a structural probe of Mu transposase-induced bending of DNA: overcoming limitations of hydroxyl-radical footprinting

Phage Mu transposase (A-protein) is primarily responsible for transposition of the Mu genome. The protein binds to six att sites, three at each end of Mu DNA. At most att sites interaction of a protein monomer with DNA is seen to occur over three minor and two consecutive major grooves and to result in bending up to about 90 degrees. To probe the directionality and locus of these A-protein-induced bends, we have used the antitumor antibiotic (+)-CC-1065 as a structural probe. As a consequence of binding within the minor groove, (+)-CC-1065 is able to alkylate N3 of adenine in a sequence selective manner. This selectivity is partially determined by conformational flexibility of the DNA sequence, and the covalent adduct has a bent DNA structure in which narrowing of the minor groove has occurred. Using this drug in experiments in which either gel retardation or DNA strand breakage are used to monitor the stability of the A-protein--DNA complex or the (+)-CC-1065 alkylation sites on DNA (att site L3), we have demonstrated that of the three minor grooves implicated in the interaction with A-protein, the peripheral two are 'open' or accessible to drug bonding following protein binding. These drug-bonding sites very likely represent binding at at least two A-protein-induced bending sites. Significantly, the locus of bending at these sites is spaced approximately two helical turns apart, and the bending is proposed to occur by narrowing of the minor groove of DNA. The intervening minor groove between these two peripheral sites is protected from (+)-CC-1065 alkylation. The results are discussed in reference to a proposed model for overall DNA bending in the A-protein att L3 site complex. This study illustrates the utility of (+)-CC-1065 as a probe for protein-induced bending of DNA, as well as for interactions of minor groove DNA bending proteins with DNA which may be masked in hydroxyl radical footprinting experiments.     

Mode of vascularization of control and basic fibroblast growth factor-stimulated prefabricated skin flaps

This study, using 62 rabbits, examines the rate and pattern of vascular outgrowth from a subcutaneously implanted vascular pedicle, how the newly formed vessels connect to preexisting skin vessels, and whether local application of basic fibroblast growth factor can accelerate the angiogenic process. When the femoral artery and vein of rabbits are implanted beneath the skin, angiogenesis from both the pedicle and small blood vessels within the adjacent skin begins within 3 days. Perfusion with India ink reveals connections between the pedicle and dermal vessels as early as 5 days after implantation of the pedicle. Provided the pedicle does not thrombose, skin flaps based on it may survive completely when elevated as early as 2 weeks after implantation. Flap survival depends on the development of a small number of vascular connections between vessels arising from the pedicle and preexisting dermal vessels. If elevation is delayed until 4 weeks after implantation a flap may survive even if its pedicle has thrombosed. Prolonged release of basic fibroblast growth factor adjacent to the pedicle significantly increases the survival of flaps elevated 1 week after implantation but does not alter the survival of flaps elevated at 2 and 4 weeks.     

Silicon Nitride Derived from an Organometallic Polymeric Precursor: Preparation and Characterization

Partially crystalline Si₃N₄, with nanosized crystals and a specific surface area greater than 200 m²/g, is obtained by pyrolysis of a commercially available vinylic polysilane in a stream of anhydrous NH₃ to 1000°C. This polymer does not contain N initially. Crystallization to high-purity α-Si₃N₄ proceeds with additional heating above 1400°C under N₂. The changes in crystallinity, powder morphology, infrared spectra, and elemental compositions, for samples annealed from 1000° to 1600°C under N₂, are consistent with an amorphous-to-crystalline transformation. Although macroscopic consolidation and local densification occur at 1400°C, volatilization and accompanying weight loss limit bulk densification. The effect of temperature on specific surface area is examined and related to the sintering process. These results are applicable to pyrolysis, decomposition, and crystallization studies of ceramics synthesized by polymeric precursor routes.     

Preparation of Silicon Carbide/Aluminum Nitride Ceramics Using Organometallic Precursors

Solid solutions of 2H -SiC/AlN can be prepared at temperatures less than 1600°C by rapid pyrolysis ("hot drop") of mixtures of [(Me₃Si)_0.80((CH₂=CH)MeSi)_1.0(MeHSi)_0.35] _n (VPS) or [MeHSiCH₂] _n (MPCS) with [R₂AlNH₂]₃, where R=Et, i -Bu or simply by slow pyrolysis of the precursor mixture in the case of [Et₂AlNH₂]₃. In contrast, slow pyrolysis of mixtures of VPS or MPCS with [ i -Bu₂AlNH₂]₃ yields a composite of 2 H -AlN and 3 C -SiC at 1600°C, which transforms into a single 2 H -SiC/AlN solid solution on heating to 2000°C. The influences of the nature of the precursor and processing conditions on the structure, composition, and purity of the SiC/AlN materials are discussed.     

Mutation analysis of the MEN1 gene in multiple endocrine neoplasia type 1, familial acromegaly and familial isolated hyperparathyroidism

Multiple endocrine neoplasia type 1 (MEN 1) is an autosomal dominant disease characterized by neoplasia of the parathyroid glands, the endocrine pancreas, and the anterior pituitary gland. In addition, families with isolated endocrine neoplasia, notably familial isolated hyperparathyroidism (FIHP) and familial acromegaly, have also been reported. However, whether these families constitute MEN 1 variants or separate entities remains speculative as the genetic bases for these diseases are unclear. The gene for MEN 1 has recently been cloned and characterized. Using single strand conformation analysis (SSCA) and sequencing, we performed mutation analysis in: a) a total of 55 MEN 1 families from 7 countries, b) 13 isolated MEN 1 cases without family history of the disease, c) 8 acromegaly families, and d) 4 FIHP families. Mutations were identified in 27 MEN 1 families and 9 isolated cases. The 22 different mutations spread across most of the 9 translated exons and included frameshift (11), nonsense (6), splice (2), missense mutations (2), and in-frame deletions (1). Among the 19 Finnish MEN 1 probands, a 1466del12 mutation was identified in 6 families with identical 11q13 haplotypes and in 2 isolated cases indicating a common founder. One frameshift mutation caused by 359del4 (GTCT) was found in 1 isolated case and 4 kindreds of different origin and haplotypes; this mutation therefore represents a common "warm" spot in the MEN1 gene. By analyzing the DNA of the parents of an isolated case one mutation was confirmed to be de novo. No mutation was found in any of the acromegaly and small FIHP families, suggesting that genetic defects other than the MEN1 gene might be involved and that additional such families need to be analyzed.     

Partitioning large networks without breaking communities

The identification of cohesive communities is a key process in social network analysis. However, the algorithms that are effective for finding communities do not scale well to very large problems, as their time complexity is worse than linear in the number of edges in the graph. This is an important issue for those interested in applying social network analysis techniques to very large networks, such as networks of mobile phone subscribers. In this respect, the contributions of this paper are twofold. First, we demonstrate these scaling issues using a prominent community-finding algorithm as a case study. Then, we show that a two-stage process, whereby the network is first decomposed into manageable subnetworks using a multilevel graph partitioning procedure, is effective in finding communities in networks with more than 10⁶ nodes.     

Electromagnetic design of a magnetic suspension system

Magnetic levitation of a metallic sphere provides a high-impact visual demonstration of many principles in undergraduate educational programs in electrical engineering, e.g., electromagnetic design, compensation of a unstable control system and power amplifier design. This paper deals with the electromagnetic and dynamic analysis of the levitation system and it has design formulae which are derived from first principles. This analysis leads to a plant transfer function which is used to implement a proportional plus derivative (PD) compensation strategy. Issues covered include coil and wire sizing for a given temperature rise. The paper shows that the electromagnet can be optimized for a given sphere. An experimental system is described which levitates a 6 cm, 0.8 kg sphere     

Color harmonies in packaging

The goal of this research was to determine whether or not there was a difference between consumer preferences for color harmonies for products where external labels and visible product existed simultaneously. Using established color theory, transparent packages containing visible products with colored labels were evaluated. Eye tracking metrics and overall preference testing were used to assess these products. Eye tracking data yielded quantitative data that was statistically analyzed using analysis of variance. A post experiment survey was given to participants to collect demographics and additional data was completed through chi‐squared tests for association. No significant difference was found between color harmonies and preference, nor was there significance for the eye tracking metrics. These results of no significance are ideal for designers because it gives them the freedom to use their judgment when designing packaging labels. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 50–59, 2017