Fabrication of core–shell nanocomposites with enhanced photocatalytic efficacy

The current study establishes the unprecedented involvement in the evolution and production of novel core–shell nanocomposites composed of nanosized titanium dioxide and aniline‐o‐phenylenediamine copolymer. TiO₂@copoly(aniline and o‐phenylenediamine) (TiO₂@PANI‐o‐PDA) core–shell nanocomposites were chemically synthesized in a molar ratio of 5:1 of the particular monomers and several weights of nano‐TiO₂ via oxidative copolymerization. The construction of the TiO₂@PANI‐o‐PDA core–shell nanocomposites was ascertained from Fourier transform IR spectroscopy, UV–visible spectroscopy and XRD. A reasonable thermal behavior for the original copolymer and the TiO₂@PANI‐o‐PDA core–shell nanocomposites was investigated. The bare PANI‐o‐PDA copolymer was thermally less stable than the TiO₂@PANI‐o‐PDA nanocomposites. The core–shell feature of the nanocomposites was found to have core and shell sizes of 17 nm and 19–26 nm, respectively. In addition, it was found that the addition of a high ratio of TiO₂ nanoparticles increases the electrical conductivity and consequently lowers the electrical resistivity of the TiO₂@PANI‐o‐PDA core–shell nanocomposites. The hybrid photocatalysts exhibit a dramatic photocatalytic efficacy of methylene blue degradation under solar light irradiation. A plausible interpretation of the photocatalytic degradation results of methylene blue is also demonstrated. Our setup introduces a facile, inexpensive, unique and efficient technique for developing new core–shell nanomaterials with various required functionalities and colloidal stabilities. © 2018 Society of Chemical Industry     

Terpolymers as precursors for CuO nanoparticles synthesis

This work describes the synthesis of terpolymers of aniline, diphenylamine, and o‐anthranilic acid (PANIDPAA) by 1 : 1 : 1 molar ratio of the respective monomers doped by different concentration of copper ions via in situ chemical terpolymerization. The results are justified by measuring spectral characteristics namely, UV‐vis absorption spectra, FTIR, and TGA. Calcining these PANIDPAA terpolymers doped by copper at temperatures in the range of 700°C led to the formation of CuO nanoparticles in the nanoscale by thermal decomposition in air directly. The stages of decompositions and the calcination temperature of the precursors have been determined from thermal analysis data sheet. The obtained CuO nanoparticles have been characterized by X‐ray diffraction and transmission electron microscope (TEM). TEM showed a particle size less than 40 nm. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41150.     

Dynamic water management of polymer electrolyte membrane fuel cells using intermittent RH control

A novel method of water management of polymer electrolyte membrane (PEM) fuel cells using intermittent humidification is presented in this study. The goal is to maintain the membrane close to full humidification, while eliminating channel flooding. The entire cycle is divided into four stages: saturation and de-saturation of the gas diffusion layer followed by de-hydration and hydration of membrane. By controlling the duration of dry and humid flows, it is shown that the cell voltage can be maintained within a narrow band. The technique is applied on experimental test cells using both plain and hydrophobic materials for the gas diffusion layer and an improvement in performance as compared to steady humidification is demonstrated. Duration of dry and humid flows is determined experimentally for several operating conditions.     

An integral solution to a nonlinear diffusion problem

The generalized Galerkin method (or the method of integral relations) is applied to the type of problem described by quasilinear parabolic equations. As an example the problem of nonlinear transient slab diffusion with a general reservoir boundary condition is worked out. The integral relations are given for an arbitrary number of strips, and solutions using up to seven strips have been obtained in order to investigate the convergence of the method.     

Transient phenomenon of step switching for current or voltage in PEMFC

The transient phenomenon of fuel cell with 5 cm² active area is investigated in this study by current density step increase and switching voltage under different conditions. It is found that there is an undershoot when the current density step increase is at the loading of 60% RH anode cathode, 3 stoic., 70 °C, 15 psi for automobile applications. The voltage is almost zero under 0.2 step increase to 1.0 A/cm² due to the H⁺ transport in membrane or H₂/O₂ in catalyst layer is almost used up. The undershoot phenomenon is more serious under gases stoichiometries of 3.0/3.0 when H₂ is fully humidified due to low gas concentration or flooding on the electrode. This phenomenon would induce the degradation of fuel cell components.     

Approximate methods for simulation and verification of numerically controlled machining programs

Algorithms for simulation and verification of Numerically Controlled (NC) machining programs are presented. Compared to NC simulation based on conventional solid modeling systems, these models are designed to give approximate results, but with a substantial decrease in computer time. The surfaces of the part are discretized into a Surface Point Set (SPS) with a point spacing dependent on cutting tool size and shape local surface curvature and the desired accuracy of the approximate simulation. The surface-surface intersection calculations of the solid modeling approach are replaced by the intersection of the surface of the tool movement envelope with straight lines emanating from the surface points. The methods are applicable to both 3 and 5 axis machining. Samples test cases are presented, and implementation and efficiency issues are discussed.     

Numerical Solution of the Dam-Break Problem with a Discontinuous Galerkin Method

A discontinuous Galerkin method for the solution of the dam-break problem is presented. The scheme solves the shallow water equations with spectral elements, utilizing an efficient Roe approximate Riemann solver in order to capture bore waves. The solution is enhanced by a projection limiter that eliminates spurious oscillations near discontinuities. The main advantage of the model is the flexibility in approximating smooth solutions with high-order polynomials and resolving at the same time discontinuous shock waves. Furthermore, the finite element discretization is capable of handling complex geometries and producing correct results near the boundaries. Both the h- and p-type extensions are investigated for the one-dimensional dam break, and the results are verified by comparison with analytical solutions. The application to a two-dimensional dam-break problem shows the efficiency and stability of the method.     

Investigating optical,electrical, and mechanical traits of thiourea admixtured KDP single crystals to explore NLO device applications

The 0.5 and 1 mol% thiourea “mixed” potassium dihydrogen phosphate (KDP) crystals have been developed by conventional slow solution evaporation method. The crystallographic parameters of grown crystals have been determined by employing single crystal X-ray diffraction technique. The functional groups of grown crystals were successfully identified by means of FTIR spectral analysis. The optical transmittance is 79%, 84%, and 89% for KDP, 0.5 mol thiourea mixed KDP, and 1 mol thiourea mixed KDP crystal. The energy band gap (E_g) of KDP, 0.5 mol thiourea mixed KDP, and 1 mol thiourea mixed KDP crystal is 3.71 eV, 3.61 eV, and 3.75 eV, respectively. The Kurtz–Perry test has been employed to determine the SHG efficiency and SHG efficiency of 0.5 and 1 mol thiourea mixed KDP crystal is 2.09 and 2.22 times superior to KDP crystal. Effect of thiourea mixing on hardness properties of KDP crystal have been scrutinized using the Vickers microhardness studies. The frequency dependent dielectric behavior of grown crystals has been analyzed at room temperature.