Polymers dynamics of the nonfluoro,nano-brush repelling agent with self-stratifying property in water-based coatings

While perfluoroalkyl acids (PFAAs), also known as C8s, are used extensively in textile repellent coatings, concerns have arisen for their carcinogenicity and hazardous effects on the environment. In this study, a novel water-based, nonfluoro, and nanobrush textile repelling agent was prepared by conventional sol–gel chemistry using amorphous fumed silica and n-octyltriethoxysilane as the starting materials. Minimal interaction between the designed repelling agent and marketed water-based resins was confirmed using linear viscosity region (LVR) analysis and asymmetric-flow field-flow fractionation (AF4), suggesting the self-stratification potential of the repelling agent. More specifically, the repelling agent exhibited excellent compatibility and self-stratifying ability with a force-emulsified acrylic-based resin, affording a water contact angle of 104.3° when incorporated at 7% solid content. Performance tests carried out on thermoplastic polyurethane (TPU) revealed excellent adhesion (100/100) of a final formulation, and a significant increase in water contact angle from 80.1° to 103.8° after treatment. In addition, the fouling area after the removal of a submerged sample from a mixture of slurry, polymer, and oil decreased from 48 to 1% when the repelling agent was added. Moreover, the sludge-fouling property remained unchanged after 1000 cycles of abrasion. These findings demonstrate the potential of the described nonfluoro, nanobrush repelling agent as an environmentally safe alternative for use with commercial resins, in turn realizing a fully water-based hydrophobic coating. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48003.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mathematical model for the pultrusion of blocked PU–UP matrix composites

The thermokinetic behavior of blocked polyurethane (PU)–unsaturated polyester (UP)–based composites during the pultrusion of glass‐fiber‐reinforced composites was investigated utilizing a mathematical model that accounted for the heat transfer and heat generation during curing. The equations of continuity and energy balance, coupled with a kinetic expression for the curing system, were solved using a finite difference method to calculate the temperature profiles and conversion profiles in the thickness direction in a rectangular pultrusion die. A kinetic model, dP/dt = A exp(?E/RT)P^m(1 ? P)ⁿ, was proposed to describe the curing behavior of a blocked PU–UP resin. Kinetic parameters for the model were obtained from dynamic differential scanning calorimetry scans using a multiple regression technique, which was able to predict the effects of processing parameters on the pultrusion. The effects of processing parameters including pulling speed, die wall temperature, and die thickness on the performance of the pultrusion also were evaluated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1996–2002, 2003     

Synergistic effects of micro-/nano-fillers on conductive and electromagnetic shielding properties of polypropylene nanocomposites

This study presents the synergistic effects of graphene nanosheets (GNSs) and carbon fibers (CFs) additions on the electrical and electromagnetic shielding properties of GNS/CF/polypropylene (PP) composites. These composites were fabricated by the melt blending of different ratios of GNSs and CFs (20:0, 15:5, 10:10, 5:15 and 0:20 wt/wt%) into a PP polymer matrix using a Brabender mixer. Besides, the chemical and crystalline structures and the thermal stability of the resultant GNS/CF/PP composites were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). FT-IR and XRD showed that with the addition of GNSs content, transmittances at 1373.4?cm^?1 and 1454.4?cm^?1 became smaller and the characteristic peak at 26.82° became stronger. TGA showed that the GNS/CF/PP composite can be used at high temperature below 456°C. Blending 10?wt% CFs and 10?wt% GNSs into the PP polymer resulted in excellent conductivity (0.397 S/cm), which indicated the occurrence of the critical percolation threshold phenomenon, and also reached the maximum electromagnetic shielding effectiveness (EMSE) of 20?dB at 1.28–2.00?GHz. Laminated with five layers of composites, its EMSE achieved 25–38?dB at 0.3–3.0?GHz, corresponding to blocking of 94.38–98.74% electromagnetic waves.     

Kinematic Design of Modular Reconfigurable In-Parallel Robots

This paper describes the kinematic design issues of a modular reconfigurable parallel robot. Two types of robot modules, the fixed-dimension joint modules and the variable dimension link modules that can be custom-designed rapidly, are used to facilitate the complex design effort. Module selection and robot configuration enumeration are discussed. The kinematic analysis of modular parallel robots is based on a local frame representation of the Product-Of-Exponentials (POE) formula. Forward displacement analysis algorithms and a workspace visualization scheme are presented for a class of three-legged modular parallel robots. Two three-legged reconfigurable parallel robot configurations are actually built according to the proposed design procedure.     

An ergonomic study of visual optimization by light color managements

Light‐emitting diodes (LEDs) have the advantage of controllable light colors and provide the optimal lighting quality against various color attributes required in different environments. However, from the humanized design point of view, beside satisfying physical demands of people, it is also important to achieve satisfaction. With a good match between the LED lighting equipment and ambient colors, the space imagery that complies with psychological needs of human beings can be found. This is expected to become a new market direction for future lighting. In this study, the LED light source feature of adjustable correlated color temperature is used to match wall colors of typical commercial spaces and for the investigation and analysis of the impact of colors of light sources and environments on human beings. The measures of mental and subjective feelings of a group of people under various circumstances have also been investigated. Multivariate analysis of variance has been conducted on three color temperatures of light sources, six wall colors, and measures of five emotion adjectives, and the correlation between these three variables has been further investigated. © 2014 Wiley Periodicals, Inc. Col Res Appl, 41, 72–84, 2016     

The Properties of Sintered Calcium Phosphate with [Ca]/[P] = 1.50

In order to obtain the properties of the sintered as-dried calcium phosphate with [Ca]/[P] = 1.50, the characteristics of sintered pellets have been investigated using X-ray diffraction (XRD), inductively coupled plasma-mass spectrometry (ICP-MS), Fourier-transform infrared (FT-IR) spectra, Vickers hardness indentation and scanning electron microscopy (SEM). When the pellet samples were sintered between 700 °C and 1200 °C for 4 h, the hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂, HA) still maintained the major phase, accompanied with the rhenanite (NaCaPO₄) as the secondary phase and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP) as the minor phases. In addition, the HA partially transformed to α-tricalcium phosphate (α-Ca₃(PO₄)₂, α-TCP) and tetracalcium phosphate (Ca₄(PO4)₂O, TTCP), when the pellet samples were sintered at 1300 °C and 1400 °C, respectively, for 4 h. The maximum density and Vickers Hardness (HV) of sintered pellet samples were 2.85 g/cm³ (90.18% theoretical density (T.D.)) and 407, which appeared at 1200 °C and 900 °C, respectively.     

Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer

The cathode microporous layer (MPL) is fabricated by various multiwall carbon nanotubes (CNTs), and its influence on the performance of a proton exchange membrane fuel cell (PEMFC) is evaluated. Three types of CNT with different dimensions are employed in the experiments, and the conventional MPL made by acetylene black (AB) is also considered for the purpose of comparison. The results show that the employment of CNT as MPL composition indeed may improve fuel cell performance significantly in comparison with the case of AB. The type of CNT with the largest tube diameter and straight cylinder in shape exhibits the highest cell performance. The corresponding optimal CNT loading and polytetrafluoroethylene (PTFE) content in the MPL are also evaluated. Results show that the case of cathode MPL composed of 1.5 mg cm^?2 CNT and 20 wt% PTFE exhibits the best performance in all the experimental cases. The present data reveal that the application of CNT for MPL fabrication is beneficial to promote PEMFC performance. Copyright © 2015 John Wiley & Sons, Ltd.