The generalized discrete ‐centroid problem

The ‐centroid problem or leader–follower problem is generalized considering different customer choice rules where a customer may use facilities belonging to different firms, if the difference in travel distance (or time) is small enough. Assuming essential goods, some particular customer choice rules are analyzed. Linear programming formulations for the generalized ‐medianoid and ‐centroid problems are presented and an exact solution approach is applied. Some computational examples are included.     

Heavy Metals Bioremediation from Polluted Water by Glass-Ceramic Materials

The objective of this research was to study the removal of cadmium and lead from an aqueous solution through a biological treatment. For this purpose a glass-ceramic material was manufactured from industrial and urban wastes. Biofilms of microorganisms found in wastewater were developed on its surface, and continuous tests were conducted in the presence and absence of the biofilm to analyze the glass-ceramic's ability to remove the heavy metals from an aqueous environment. The results suggest that this bioremediation process, developed on an industrial scale, could represent an alternative to the chemical processes currently used.     

Effect of thapsigargin on calcium homeostasis in Trypanosoma cruzi trypomastigotes and epimastigotes

By using the fluorescent calcium indicator fura-2, it was found that the concentration of free Ca2+ in the cytoplasm of Trypanosoma cruzi trypomastigotes incubated in the presence or absence of external calcium was maintained at very low levels (10-20 nM). When trypomastigotes were incubated in the presence of succinate and ATP and permeabilized with digitonin, they lowered the medium calcium concentration to a submicromolar level. In the presence of 1 microM FCCP the initial rate of Ca2+ sequestration by these permeabilized cells was very slow. When succinate alone was present, the initial rate of Ca2+ accumulation was slower than with ATP plus succinate, and the calcium set point was about 0.6 microM. The succinate dependence and FCCP sensitivity of the later Ca2+ uptake indicate that it may be exerted by the mitochondria. High concentrations of the tumor promoter thapsigargin slightly increased cytosolic Ca2+ in the presence of extracellular Ca2+ but had no effect on the FCCP- and oligomycin/antimycin A-insensitive Ca2+ pool. In addition, when used at those concentrations (4-20 microM), thapsigargin was shown to release Ca2+ from the mitochondria and to decrease the inner mitochondrial membrane potential of trypomastigotes and epimastigotes as measured using safranine O. Despite the presence of inositol phosphates as determined by [3H]inositol incorporation, no IP3-sensitive Ca2+ release could be detected in trypomastigotes.     

Comparison between the binding of chlorpheniramine maleate to poly(sodium 4-styrenesulfonate) and the binding to other polyelectrolytes

The interactions of the antihistaminic drug chlorpheniramine maleate (CPM) with the negatively charged polyelectrolytes poly(sodium 4-styrenesulfonate) (PSS) and poly(acrylic acid) (PAA) are studied by the washing method of the diafiltration technique at conditions simulating those of the small intestine such as pH 7.5 and 0.13 M NaCl. The results are compared with those already reported involving other pharmacologically important polyelectrolytes such as alginic acid (ALG), carboxymethylcellulose (CMC), and κ- and ι-carrageenan (κ- and ι-CAR). As in the case of ALG, CMC, and CAR, interactions of CPM with PAA appear to be electrostatic and are cleaved in the presence of 0.13 M NaCl. On the contrary, apart from electrostatic interactions, additional interactions are found with PSS and residual interactions are kept in the presence of 0.13 M NaCl, a fact that may be attributed to π-π interactions and hydrophobic forces. The effect of the addition of 4 M urea, branched poly(ethyleneimine) (BPEI), and poly(vinylpyrrolidone) (PVP) is also studied. The addition of urea 4 M or 0.001 M BPEI produces a decrease on the amounts of counterions bound to PSS at infinite elution, while the addition of PVP does not produce any change on the diafiltration profiles.     

Polymerization of ionic monomers in polar solvents: kinetics and mechanism of the free radical copolymerization of acrylamide/acrylic acid

A precise data set describing the kinetics of the free radical copolymerization of acrylamide/acrylic acid (AM/AA) in the range of low total monomer concentration as a function of the pH, total monomer concentration, initiator concentration, and comonomer ratio is presented. Strong impact on the reactivity ratios has been identified for the pH and total monomer concentration. Specifically, at constant total monomer concentration of 0.4 mol/l and T=313 K the reactivity ratio of AM increases from 0.54 at pH 1.8 to 3.04 at pH 12. Contrarily, the reactivity ratio of AA decreases from 1.48 to 0.32. The crossover occurs at pH≈4.2. Electrostatic effects due to the variation of the degree of ionization of AA are primarily suggested to influence the kinetics. When the total monomer concentration increases from 0.2 to 0.6 mol/l at constant pH=12, the reactivity ratios of AM and AA decrease from 4.01 to 2.13 and increase from 0.25 to 0.47, respectively. Reduction of electrostatic repulsion between the ionized monomer AA and partially charged growing polymer chain ends due to higher ionic strength at higher total monomer concentration serves as explanation of the effect. The precise data set is the prerequisite for a novel approach to calculate copolymer compositions in case of variable monomer reactivity.     

Operating experience from the ehecatl wind turbines

This paper presents a summary of the mechanical features and the medium term operating experience from three small horizontal axis wind energy conversion systems covering a range of 500 to 5000 Watt, intented for rural and isolated communities. These turbines have a new regulator which reduces gyroscopic loads, is easy to adjust and could be manufactured stronger and in smaller sizes than the conventional tail vanes. It is concluded that is feasible to build cheaps and reliable wind turbine generators with an acceptable efficiency employing common-use elements, but is needed a careful and optimized design.