The effects of the pretreatment of intravenous high dose methylprednisolone on Na(+)-K(+)/Mg(+2) ATPase and lipid peroxidation and early ultrastructural findings following middle cerebral artery occlusion in the rat

The sodium-potassium activated and magnesium dependent adenosine-5'-triphosphatase (Na(+)-K(+)/Mg(+2) ATPase EC.3.6.1.3.) activity and lipid peroxidation and early ultrastructural findings were determined in rat brain at the acute stage of ischaemia produced by permanent unilateral occlusion of the middle cerebral artery (MCA). The effects of the pretreatment with intravenous high-dose methylprednisolone (MP) on these biochemical indices and ultrastructural findings were also evaluated in the same model. The rats were divided into four groups. In group I, 10 rats were used to determine Na(+)-K(+)/Mg(+2) ATPase activity and the extent of lipid peroxidation by measuring the malondialdehyde (MDA) content and normal ultrastructural findings. In group II on 20 rats, only subtemporal craniectomy was done in order to determine the effects of the surgical procedure on these indices and findings. This group was treated intravenously with saline solution before occlusion. In group III with MCA occlusion, saline solution was administered intravenously to 20 rats in the same amount of methylprednisolone used in group IV, ten minutes before the occlusion. In Group IV, a single high-dose (30 mg/kg) of methylprednisolone was administered intravenously, ten minutes before occlusion in 20 rats. After occlusion of the middle cerebral artery, Na(+)-K(+)/Mg(+2) ATPase activity was decreased promptly in the first ten minutes in the ischaemic hemisphere and remained at a lower level than the contralateral hemispheres in the same group and the normal levels in group I, during 120 minutes of ischaemia. A single dose methylprednisolone pretreatment prohibited the inactivation of Na(+)-K(+)/Mg(+2) ATPase. On the other hand, there was significant difference in malondialdehyde content between group I and group III. Malondialdehyde levels were significantly increased following ischaemia and a non-significant increase was observed in the contralateral hemisphere. Methylprednisolone treatment significantly decreased malondialdehyde content on the side of the ischaemic hemisphere. We conclude that there is a positive relationship between membrane-bound enzyme Na(+)-K(+)/Mg(+2) ATPase activity, malondialdehyde content and early ultrastructural changes in the treated group with MP. These data suggest that the pretreatment injection of high doses (30 mg/kg) methylprednisolone contribute to the protection of the brain from ischaemia with stabilization of the cell membrane by effecting the lipid peroxidation and the activation of Na(+)-K(+)/Mg(+2) ATPase.     

A histological study on polyactive® for the prevention of peridural adhesions after spinal surgery: an experimental study in dogs with a 3 months follow-up

In the present study the potential of Polyactive^® bilayer sheets in the prevention of scar tissue formation after spinal surgery was investigated. Eight adult beagle dogs underwent 3 laminectomies at three levels (L2, L4 and L6). According to a randomized implantation schedule a Polyactive^® sheet or autogenous fat graft was placed in the defect. The third site served as a control without implant. After 4 or 12 weeks (4 dogs per period) the dogs were sacrificed and histological sections were prepared. The Polyactive^® treated defects showed partial closure by newly formed bone. The Polyactive^® was encapsuled by a thin fibrous tissue layer. Ventral to the defect, dense fibrous tissue was present which was separated from the dura by the Polyactive^® sheet in all cases. In some cases fibrous tissue was present between the implant capsule and the dura. In the fat graft group there were no signs of closure of the defect but most sites showed fibrous tissue at the edges of the graft, which was in 4 sites continous with the dura mater. Fibrosis and degeneration of the fat grafts were seen. All control defects showed partial closure by newly formed bone, and ventral to the defect extensive fibrous tissue, which was in 50% continous with the dura mater. Other sections showed loose connective tissue in contact with the dura mater. It is concluded that Polyactive^® has a potential as a mechanical barrier in the prevention of adhesions between the dorsal spinal muscles and the dura mater.     

The influence of grinding technique on the liberation of clinker minerals and cement properties

This paper describes a study of the relationship between the physical, chemical and mineralogical parameters of cement products obtained by different grinding mechanisms namely high pressure grinding rolls (HPGR) and ball milling, and their effects upon the properties of cements prepared from the ground clinker. Samples were prepared as narrow size fractions and also as distribution samples. Characterization parameters were ascertained by using XRF, laser sizing, Blaine and BET surface area and image analysis methods. HPGR grinding resulted in higher degrees of liberation of clinker phases arising from the intergranular breakage along the grain boundaries compared to ball mill grinding. As for service properties, water demand of HPGR products was higher than ball mill products resulting from high micro fissured structure. Despite high liberation of particularly alite mineral in HPGR grinding, the compressive strength of ball mill products was slightly higher than HPGR products for narrow size samples. Finally, particle size distribution effect on strength was more obvious for distribution samples; generally ball milling gave higher strength values.     

Estimation of parameters where dependent observations are related by equality constraints

Pirt's model for microbial growth and product formation are reparameterized to obtain multiresponse models with common parameters. The dependent variables in the models are related through the available electron and carbon balance constraints. Covariance adjustment is used to reduce the growth model to a unit variate linear model with covariates. Therefore, standard multiple regression programs can be used to obtain combined point and interval estimates of true biomass energetic yield, true product yield and maintenance coefficient. This approach may yield “better” estimates than the maximum likelihood approach when an appropriately selected subset of covariates is used. Nonlinear estimation procedures are also considered; these procedures are efficient with few responses; however, as the number of responses per observation increase, they may require a lot of computing time. For illustration several data from the biochemical engineering literature are analyzed by the proposed methods.     

The advantages of using impact resonance test in dynamic modulus master curve construction through the abbreviated test protocol

Asphalt concrete behavior is heavily dependent on temperature and loading rate. Hence, the material is typically tested at a range of temperatures and loading frequencies to capture its properties. Results are then used to develop a master curve exhibiting material behavior at the full spectrum of loading frequencies. An abbreviated testing protocol, under AASHTO PP 61-13, proposes a practical approach for development of this master curve. In this practice, the low temperature asymptote of the master curve is dominated by the limiting maximum modulus estimated through the Hirsch model. In this study, the dynamic modulus (DM) testing coupled with impact resonance (IR) test was used to evaluate the effect of this limiting maximum modulus on construction of the asphalt concrete master curve. Three different asphalt mixtures prepared with the same gradation and binder content, but different grades of stiffness were tested. The DM testing was performed at multiple temperatures and loading frequencies. The IR tests were conducted on the same specimens at the same temperatures. Two sigmoid functions (MEPDG and Richards models), and three shift factors (Arrhenius, Williams–Landel–Ferry, and polynomial) were utilized in the analysis. Richards sigmoid function coupled with polynomial shift factor provided the best fitting accuracy to the measured data. It was observed that the limiting maximum modulus obtained from experimental data was underpredicted by that obtained from the Hirsch model. The results indicated potential benefits of the IR test as a complementary testing tool to the abbreviated DM testing protocol to reliably characterize asphalt concrete.     

Prediction of deflection of reinforced concrete shear walls

Reinforced concrete shear walls are used in tall buildings for efficiently resisting lateral loads. Due to the low tensile strength of concrete, reinforced concrete shear walls tend to behave in a nonlinear manner with a significant reduction in stiffness, even under service loads. To accurately assess the lateral deflection of shear walls, the prediction of flexural and shear stiffness of these members after cracking becomes important. In the present study, an iterative analytical procedure which considers the cracking in the reinforced concrete shear walls has been presented. The effect of concrete cracking on the stiffness and deflection of shear walls have also been investigated by the developed computer program based on the iterative procedure. In the program, the variation of the flexural stiffness of a cracked member has been evaluated by ACI and probability-based effective stiffness model. In the analysis, shear deformation which can be large and significant after development of cracks is also taken into account and the variation of shear stiffness in the cracked regions of members has been considered by using effective shear stiffness model available in the literature. Verification of the proposed procedure has been confirmed from series of reinforced concrete shear wall tests available in the literature. Comparison between the analytical and experimental results shows that the proposed analytical procedure can provide an accurate and efficient prediction of both the deflection and flexural stiffness reduction of shear walls with different height to width ratio and vertical load. The results of the analytical procedure also indicate that the percentage of shear deflection in the total deflection increases with decreasing height to width ratio of the shear wall.     

Enhanced multiclass SVM with thresholding fusion for speech-based emotion classification

As an essential approach to understanding human interactions, emotion classification is a vital component of behavioral studies as well as being important in the design of context-aware systems. Recent studies have shown that speech contains rich information about emotion, and numerous speech-based emotion classification methods have been proposed. However, the classification performance is still short of what is desired for the algorithms to be used in real systems. We present an emotion classification system using several one-against-all support vector machines with a thresholding fusion mechanism to combine the individual outputs, which provides the functionality to effectively increase the emotion classification accuracy at the expense of rejecting some samples as unclassified. Results show that the proposed system outperforms three state-of-the-art methods and that the thresholding fusion mechanism can effectively improve the emotion classification, which is important for applications that require very high accuracy but do not require that all samples be classified. We evaluate the system performance for several challenging scenarios including speaker-independent tests, tests on noisy speech signals, and tests using non-professional acted recordings, in order to demonstrate the performance of the system and the effectiveness of the thresholding fusion mechanism in real scenarios.     

Real imaging and size values of Saccharomyces cerevisiae cells with comparable contrast tuning to two environmental scanning electron microscopy modes

The combined application of electron microscopy (EM) is frequently used for the microstructural investigation of biological specimens and plays two important roles in the quantification and in gaining an improved understanding of biological phenomena by making use of the highest resolution capability provided by EM. The possibility of imaging wet specimens in their "native" states in the environmental scanning electron microscope (ESEM) at high resolution and large depth of focus in real time is discussed in this paper. It is demonstrated here that new features can be discovered by the elimination of even the least hazardous approaches in some preparation techniques, that destroy the samples. Since the analysis conditions may influence the morphology and the extreme surface sensitivity of living biological systems, the results obtained from the same cultured cell with two different ESEM modes (Lvac mode and wet mode) were compared. This offers new opportunities compared with ESEM-wet/Lvac-mode imaging, since wet-mode imaging involves a real contrast and gives an indication of the changes in cell morphology and structure required for cell viability. In this study, wet-mode imaging was optimized using the unique ability of cell quantities for microcharacterization in situ giving very fine features of topological effects. Accordingly, the progress is reported by comparing the results of these two modes, which demonstrate interesting application details. In general, the functional comparisons have revealed that the fresh unprocessed Saccharomyces cerevisiae cells (ESEM-wet mode) were essentially unaltered with improved and minimal specimen preparation timescales, and the optimal cell viability degree was visualized and also measured quantitatively while the cell size remained unchanged with continuous images.     

Historical Gardens at Risk of the Destruction by Visitors,Case Study of El-Goli Garden (Iran)

This study, which was conducted on the only surviving garden of the historic gardens in the city of Tabriz in Iran (i.e. the garden of El-Goli), closely examines its importance and place in the Iranian art of gardening. El-Goli garden is considered as an important place in the city by foreign and local tourists. However, in recent years, with the development of Tabriz and consequently the increased need for green space and recreational areas for citizens, this historic garden has become a public promenade and park. This paper examines the risks and threats posed by the change in land use. Since visitors are the main threats, a questionnaire was developed to identify their reasons for visiting the garden, their behaviour in the garden and how they use this historic garden. The questionnaire was completed by 100 visitors who were randomly selected. The table of frequency for each variable was prepared using SPSS software. Finally, the results show that most visitors not only are unaware of the historical value, but also come to the garden for other purposes such as recreation, leisure and use of facilities and so on. Thus, their attitudes and behaviours will pave the way for the destruction of the garden.     

Flocculation of coal suspension with mono/dual polymer systems and contribution of Ca(II)/Mg(II) ions

In the experimental study carried out on mono-flocculation, anionic and especially non-ionic polymers strongly flocculated the coal suspension than cationic polymer. The dual-flocculation of the coal suspension with cationic and anionic polymer combination was also studied and the high performances of flocculation were also reached with dual-polymer approach. Furthermore, dual-polymer system required lower concentrations for the successful flocculation of coal particles. On the other hand, the pre-destabilization of the coal suspension with calcium and magnesium ions at particular pH and concentrations highly improved the flocculation of fine coal particles with these polymers.