Uncertainties in the determination of pyrrolizidine alkaloid levels in naturally contaminated honeys and comparison of results obtained by different analytical approaches

The contamination of honey with hepatotoxic pyrrolizidine alkaloids (PAs) is a well-known hazard for food safety. While management strategies and controls of the honey industry aim to reduce the PA levels, uncertainties remain with regard to the safety of regionally produced and marketed honey. In addition, a previous study showed large differences of results obtained after various periods of storage and apparent differences between the analytical results of different laboratories. Therefore, this study aimed at examining these uncertainties by monitoring the impact of storage on the PA and PA N-oxide (PANO) content of two freshly harvested honeys and on possible demixing effects caused by pollen settling. Additionally, three analytical approaches – target analysis with matrix-matched calibration or standard addition and a sum parameter method – were applied for a comparative analysis of 20 honeys harvested in summer 2016. All samples originated from Schleswig-Holstein in Northern Germany where the PA plant Jacobaea vulgaris is currently observed on a massive scale. The results of the time series analyses showed that PANO levels markedly decreased within a few weeks and practically reached the LOD 16 weeks after harvest. Tertiary PAs, by contrast, remained stable and did not increase as a consequence of PANO decrease. The experiments on a putative demixing, which may result in a heterogeneous distribution of PAs/PANOs, revealed that there was no such effect during storage of up to 12 weeks. A comparison of the PA/PANO levels obtained by different analytical approaches showed that in some cases the sum parameter method yielded much higher levels than the target approaches, whereas in other cases, the target analysis with standard addition found higher levels than the other two methods. In summary, the results of this study highlight uncertainties regarding the validity and comparability of analytical results and consequently regarding health risk assessment.     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Choice between fixed and variable delays with different reward amounts.

Choice between a variable and a fixed food source was studied in pigeons. The variable source yielded different durations of access to food (changed across experimental conditions) uniquely associated with equiprobable delays of either 20 sec or 60 sec, timed from the choice point. A comparison, elapsing alternative (time-left procedure [J. Gibbon and R. M. Church; see PA, Vol 67:2812]), was associated with fixed access to feeder after a 60-sec delay, timed from the beginning of the trial. Preference was best characterized as reflecting an average of the 2 local rates of reinforcement in the variable alternative (the average of the ratio of each standard amount and its associated delay). The averaging rule characterized initial choice link data well, but terminal link responding showed that Ss also remembered the 2 delay–amount combinations separately. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Identifying the criterion spontaneously minimized during the take-off phase of a sub-maximal long jump through optimal synthesis

Optimal synthesis of human movement or the prediction of the kinematics of a new movement require not only that the multi-body system be modeled but also that a performance criterion is specified. For sub-maximal movements the selection of a suitable performance criterion, able to generate realistic dynamic behavior is difficult. A two-dimensional simulation model of the take-off phase of a sub-maximal long jump was developed to study the effect of criterion choice on the realism of simulated movements. A parametric optimization technique was employed to obtain solutions to the constrained equations of motion. Seven different criteria were evaluated, by comparing simulated movements with an actual performance, to identify the criterion which most closely approximated that spontaneously minimized by the athlete. Synthesis of the take-off phase of a sub-maximal long jump was found to be sensitive to the chosen criterion, with a criterion based on minimizing joint intersegmental forces found to perform well.     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.     

Color object segmentation and tracking using flexible statistical model and level-set

Multimedia Tools and Applications - This study presents an unsupervised novel algorithm for color image segmentation, object detection and tracking based on unsupervised learning step followed with...     

Effect of substrate surface roughness on the adherence of NiCrAlY thermal spray coatings

The adherence of plasma sprayed NiCrAlY bond coats can be improved by an appropriate substrate surface finish. The interface fracture energy for crack propagation along the coating/substrate interface has been measured for different surface roughness by means of a specially designed four-point bending test. An increase of the interface fracture energy of about 15% was observed for a three times higher surface roughness. In addition, four-point bending tests with the coating on the side face of bending specimens were performed to analyze the fracture and spalling behavior of the coatings both under large tensile and compressive substrate deformations.     

On the human ability to discriminate audio ambiances from similar locations of an urban environment

When developing advanced location-based systems augmented with audio ambiances, it would be cost-effective to use a few representative samples from typical environments for describing a larger number of similar locations. The aim of this experiment was to study the human ability to discriminate audio ambiances recorded in similar locations of the same urban environment. A listening experiment consisting of material from three different environments and nine different locations was carried out with nineteen subjects to study the credibility of audio representations for certain environments which would diminish the need for collecting huge audio databases. The first goal was to study to what degree humans are able to recognize whether the recording has been made in an indicated location or in another similar location, when presented with the name of the place, location on a map, and the associated audio ambiance. The second goal was to study whether the ability to discriminate audio ambiances from different locations is affected by a visual cue, by presenting additional information in form of a photograph of the suggested location. The results indicate that audio ambiances from similar urban areas of the same city differ enough so that it is not acceptable to use a single recording as ambience to represent different yet similar locations. Including an image was found to increase the perceived credibility of all the audio samples in representing a certain location. The results suggest that developers of audio-augmented location-based systems should aim at using audio samples recorded on-site for each location in order to achieve a credible impression.