Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

Barium titanate‐based nanodielectrics of two chemically recyclable thermosets

In this work was investigated the effect of the addition of barium titanate (BaTiO₃) on electrical properties of two chemically recyclable thermosets, polyhemiaminal (PHA) and polyhexahydro‐s‐triazine (PHT), both fabricated from 4,4′‐oxydianiline (ODA), an ether derivative of aniline and paraformaldehyde. Thermal and mechanical properties as well as chemical recyclability of the two polymers and their nanocomposites/nanodielectrics were also investigated. In addition, a quantitative analysis was conducted of the nanoparticle dispersion in the PHA‐/PHT‐based BaTiO₃‐containing nanocomposites using transmission electron microscopy imaging and the nearest‐neighbor distance index and this index was used to analyze the investigated properties in connection with the proper mechanisms. Regarding the electrical properties for both neat polymers, conductivity values of the order of 10^?8 S m^?1 at 100 Hz were observed and dielectric constant values close to 2.80 for both polymers at 1 kHz. The addition of 0.5 wt% of BaTiO₃ ferroelectric nanoparticles increased by about 44% the dielectric constant (1 kHz) and conductivity (10² Hz) of the PHA‐based nanocomposite. PHA and PHT exhibited glass transition temperature (T_g) values in the range 125–180 °C. An increase of 7 °C in T_g was observed after the incorporation of 0.5 wt% of BaTiO₃ into PHA. Concerning the mechanical properties, values in the range 4.00–4.45 GPa for reduced modulus and 0.30–0.43 GPa for nanohardness for PHA and PHT polymers were observed. Independently of filler content or polymer matrix, both mechanical properties were enhanced after the addition of BaTiO₃. The chemical recycling of PHA/PHT and all nanocomposites in the initial ODA reagent after sulfuric acid treatment was successfully characterized using the NMR and Fourier transform infrared spectroscopic techniques. © 2018 Society of Chemical Industry     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Smooth muscle of the bladder in the normal and the diseased state: pathophysiology, diagnosis and treatment

The smooth muscle of the normal bladder wall must have some specific properties. It must be very compliant and able to reorganise itself during filling and emptying to accommodate the change in volume without generating any intravesical pressure, but whilst maintaining the normal shape of the bladder. It must be capable of synchronous activation to generate intravesical pressure at any length to allow voiding. The cells achieve this through spontaneous electrical activity combined with poor electrical coupling between cells, and a dense excitatory innervation. In the diseased state, alterations of the smooth muscle may lead to failure to store or failure to empty properly. The diseased states discussed are bladder instability and diabetic neuropathy. Bladder instability is characterised urodynamically by uninhibitable rises in pressure during filling, and is seen idiopathically and in association with bladder outflow obstruction and neuropathy. In diabetic neuropathy, many of the smooth muscle changes are a consequence of diuresis, but there is evidence for alterations in the sensory arm of the micturition reflex. In the unstable bladder, additional alterations of the smooth muscle are seen, which are probably caused by the patchy denervation that occurs. The causes of this denervation are not fully established. Nonsurgical treatment of instability is not yet satisfactory; neuromodulation has some promise, but is expensive, and the mechanisms poorly understood. Pharmacological treatment is largely through muscarinic receptor blockade. Drugs to reduce the excitability of the smooth muscle are being sought, since they may represent a better pharmacological option.     

Risk factors for a medically inappropriate admission to a Department of Internal Medicine

OBJECTIVE: To identify patient- and admission-related risk factors for a medically inappropriate admission to a department of internal medicine. METHODS: Cross-sectional study of a systematic sample of 500 admissions to the department of internal medicine of an urban teaching hospital. The appropriateness of each admission and reasons for inappropriate admissions were assessed using the Appropriateness Evaluation Protocol. Risk factors included the time (day of week and holidays) and manner (through emergency department or direct admission) of admission, patient age and sex, health status of patient and spouse, living arrangements, formal home care services, and informal support from family or friends. RESULTS: Overall, 76 (15.2%) hospital admissions were rated as medically inappropriate by the Appropriateness Evaluation Protocol. In multivariate analysis, the likelihood of an inappropriate admission was increased by better physical functioning of the patient (odds ratio [OR], 1.5; 95% confidence interval [CI], 1.1-2.1 [for 1 SD in Physical Functioning scores]), lower mental health status of the patient's spouse (OR, 2.6; 95% CI, 1.3-5.6), receipt of informal help from family or friends (OR, 3.3; 95% CI, 1.5-7.2), and hospitalization by one's physician (OR, 3.6; 95% CI, 1.7-7.5). Receiving formal adult home care was not associated with inappropriateness of hospitalization. CONCLUSIONS: Inappropriate admissions to internal medicine wards are determined by a mix of factors, including the patient's health and social environment. In addition, the private practitioners' discretionary ability to hospitalize their patients directly may also favor medically inappropriate admissions.