Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites

In this study the effects of high temperature and moisture on the impact damage resistance and mechanical strength of Nextel 610/alumina silicate ceramic matrix composites were experimentally evaluated. Composite laminates were exposed to either a 1050°C isothermal furnace-based environment for 30 consecutive days at 6 h a day, or 95% relative humidity environment for 13 consecutive days at 67°C. Low velocity impact, tensile and short beam strength tests were performed on both ambient and environmentally conditioned laminates and damage was characterized using a combination of non-destructive and destructive techniques. High temperature and humidity environmental exposure adversely affected the impact resistance of the composite laminates. For all the environments, planar internal damage area was greater than the back side dent area, which in turn was greater than the impactor side dent area. Evidence of environmental embrittlement through a stiffer tensile response was noted for the high temperature exposed laminates while the short beam strength tests showed greater propensity for interlaminar shear failure in the moisture exposed laminates. Destructive evaluations exposed larger, more pronounced delaminations in the environmentally conditioned laminates in comparison to the ambient ones. External damage metrics of the impactor side dent depth and area directly influenced the post-impact tensile strength of the laminates while no such trend between internal damage area and residual strength could be ascertained.     

Process models for service-based applications: A systematic literature review

Context

Service-Oriented Computing (SOC) is a promising computing paradigm which facilitates the development of adaptive and loosely coupled service-based applications (SBAs). Many of the technical challenges pertaining to the development of SBAs have been addressed, however, there are still outstanding questions relating to the processes required to develop them.

Objective

The objective of this study is to systematically identify process models for developing service-based applications (SBAs) and review the processes within them. This will provide a useful starting point for any further research in the area. A secondary objective of the study is to identify process models which facilitate the adaptation of SBAs.

Method

In order to achieve this objective a systematic literature review (SLR) of the existing software engineering literature is conducted.

Results

During this research 722 studies were identified using a predefined search strategy, this number was narrowed down to 57 studies based on a set of strict inclusion and exclusion criteria. The results are reported both quantitatively in the form of a mapping study, as well as qualitatively in the form of a narrative summary of the key processes identified.

Conclusion

There are many process models reported for the development of SBAs varying in detail and maturity, this review has identified and categorised the processes within those process models. The review has also identified and evaluated process models which facilitate the adaptation of SBAs.     

Estimating the Laplace-Beltrami Operator by Restricting 3D Functions

We present a novel approach for computing and solving the Poisson equation over the surface of a mesh. As in previous approaches, we define the Laplace-Beltrami operator by considering the derivatives of functions defined on the mesh. However, in this work, we explore a choice of functions that is decoupled from the tessellation. Specifically, we use basis functions (second-order tensor-product B-splines) defined over 3D space, and then restrict them to the surface. We show that in addition to being invariant to mesh topology, this definition of the Laplace-Beltrami operator allows a natural multiresolution structure on the function space that is independent of the mesh structure, enabling the use of a simple multigrid implementation for solving the Poisson equation.     

Key activities for product derivation in software product lines

More and more organizations adopt software product lines to leverage extensive reuse and deliver a multitude of benefits such as increased quality and productivity and a decrease in cost and time-to-market of their software development. When compared to the vast amount of research on developing product lines, relatively little work has been dedicated to the actual use of product lines to derive individual products, i.e., the process of product derivation. Existing approaches to product derivation have been developed independently for different aims and purposes. While the definition of a general approach applicable to every domain may not be possible, it would be interesting for researchers and practitioners to know which activities are common in existing approaches, i.e., what are the key activities in product derivation. In this paper we report on how we compared two product derivation approaches developed by the authors in two different, independent research projects. Both approaches independently sought to identify product derivation activities, one through a process reference model and the other through a tool-supported derivation approach. Both approaches have been developed and validated in research industry collaborations with different companies. Through the comparison of the approaches we identify key product derivation activities. We illustrate the activities’ importance with examples from industry collaborations. To further validate the activities, we analyze three existing product derivation approaches for their support for these activities. The validation provides evidence that the identified activities are relevant to product derivation and we thus conclude that they should be considered (e.g., as a checklist) when developing or evaluating a product derivation approach.     

Analysis of a prioritized CSMA protocol based on staggered delays

Summary Carrier sense multiple access (CSMA) protocols were originally conceived for use in digital radio communication. Such protocols are, however, quite applicable in a variety of distributed computing and local networking configurations based on a shared bus. The CSMA protocols are characterized by the fact that message collisions can occur only in a very small time window whose duration corresponds to the propagation delay of the bus. They are further characterized by the technique used to subsequently serialize the transmission of the colliding messages. In this paper we analyze the situation wherein colliding messages are serialized by using a set of staggered retry delays which are associated with the sources that may generate the colliding messages. Our analysis produces both path throughput (utilization) curves and message delay curves, as a function of message generation rate. These curves show that the protocol is in a sense self stabalizing, serve to quantify its behaviour, and indicate loading levels which result in unacceptable message delays.     

A novel method for measuring induction machine magnetizing inductance

This paper presents a novel method for measuring the magnetizing inductance of an induction machine. The approach uses a static DC excitation technique which can be employed whenever the neutral of the machine is accessible. The proposed method measures only the magnetizing inductance and not the self inductance which normally includes the effect of the stator leakage inductance. Because this test uses a DC excitation, the iron losses in the motor are considerably reduced as well and minimally influence the measurement when compared to the traditional 60-Hz no-load test. By using the proposed method for measuring only the magnetizing inductance, the stator leakage inductance can be later individually determined by performing a separate no-load test. Test results using the method are compared with theoretical values and confirm its feasibility.     

The Influence of Glow and Afterglow Cold Plasma Treatment on Biochemistry,Morphology, and Physiology of Wheat Seeds

Cold plasma (CP) technology is a technique used to change chemical and morphological characteristics of the surface of various materials. It is a newly emerging technology in agriculture used for seed treatment with the potential of improving seed germination and yield of crops. Wheat seeds were treated with glow (direct) or afterglow (indirect) low-pressure radio-frequency oxygen plasma. Chemical characteristics of the seed surface were evaluated by XPS and FTIR analysis, changes in the morphology of the seed pericarp were analysed by SEM and AFM, and physiological characteristics of the seedlings were determined by germination tests, growth studies, and the evaluation of α-amylase activity. Changes in seed wettability were also studied, mainly in correlation with functionalization of the seed surface and oxidation of lipid molecules. Only prolonged direct CP treatment resulted in altered morphology of the seed pericarp and increased its roughness. The degree of functionalization is more evident in direct compared to indirect CP treatment. CP treatment slowed the germination of seedlings, decreased the activity of α-amylase in seeds after imbibition, and affected the root system of seedlings.     

Generalized Approach towards Secretion-Based Protein Production via Neutralization of Secretion-Preventing Cationic Substrate Residues

Many heterologous proteins can be secreted by bacterial ATP-binding cassette (ABC) transporters, provided that they are fused with the C-terminal signal sequence, but some proteins are not secretable even though they carry the right signal sequence. The invention of a method to secrete these non-secretable proteins would be valuable both for understanding the secretory physiology of ABC transporters and for industrial applications. Herein, we postulate that cationic “supercharged” regions within the target substrate protein block the secretion by ABC transporters. We also suggest that the secretion of such substrate proteins can be rescued by neutralizing those cationic supercharged regions via structure-preserving point mutageneses. Surface-protruding, non-structural cationic amino acids within the cationic supercharged regions were replaced by anionic or neutral hydrophilic amino acids, reducing the cationic charge density. The examples of rescued secretions we provide include the spike protein of SARS-CoV-2, glutathione-S-transferase, streptavidin, lipase, tyrosinase, cutinase, growth factors, etc. In summary, our study provides a method to predict the secretability and a tool to rescue the secretion by correcting the secretion-blocking regions, making a significant step in understanding the physiological properties of ABC transporter-dependent protein secretion and laying the foundation for the development of a secretion-based protein-producing platform.     

Biocompatibility and Mechanical Stability of Nanopatterned Titanium Films on Stainless Steel Vascular Stents

Nanoporous ceramic coatings such as titania are promoted to produce drug-free cardiovascular stents with a low risk of in-stent restenosis (ISR) because of their selectivity towards vascular cell proliferation. The brittle coatings applied on stents are prone to cracking because they are subjected to plastic deformation during implantation. This study aims to overcome this problem by using a unique process without refraining from biocompatibility. Accordingly, a titanium film with 1 µm thickness was deposited on 316 LVM stainless-steel sheets using magnetron sputtering. Then, the samples were anodized to produce nanoporous oxide. The nanoporous oxide was removed by ultrasonication, leaving an approximately 500 nm metallic titanium layer with a nanopatterned surface. XPS studies revealed the presence of a 5 nm-thick TiO₂ surface layer with a trace amount of fluorinated titanium on nanopatterned surfaces. Oxygen plasma treatment of the nanopatterned surface produced an additional 5 nm-thick fluoride-free oxide layer. The samples did not exhibit any cracking or spallation during plastic deformation. Cell viability studies showed that nanopatterned surfaces stimulate endothelial cell proliferation while reducing the proliferation of smooth muscle cells. Plasma treatment further accelerated the proliferation of endothelial cells. Activation of blood platelets did not occur on oxygen plasma-treated, fluoride-free nanopatterned surfaces. The presented surface treatment method can also be applied to other stent materials such as CoCr, nitinol, and orthopedic implants.     

Thermal analysis of randomly oriented carbon nanotube reinforced functionally graded timoshenko beam

The unique thermal properties of carbon nanotubes (CNT) are utilized to increase the use of functionally graded material (FGM) at higher temperatures which resulted in introduction of a new type of material called as functionally graded carbon nanotube-reinforced composites (FG-CNTRCs). To use the FG-CNTRCs at elevated temperatures, their thermal analysis is very important. In this context, this article presents the thermal analysis of a CNT based FG Timoshenko beam. Material properties distribution is assumed to vary along the thickness direction according to power law distribution and linear distributions. Finite difference method is implemented to find out the temperature distribution. Using first order shear deformation theory (FSDT), expressions for strains and stresses are obtained. The results are compared with temperature distribution according to power law. The effect of CNT distribution on strains and stresses is also observed. Based on these results important conclusions have been drawn.