Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Dielectric,ferroelectric, and energy storage properties in dysprosium doped sodium bismuth titanate ceramics

In this work, Na_0.5(Bi_1-xDy_x)_0.5TiO₃ (0?≤?x?≤?15%) ceramics were prepared via solid state reaction method and were characterized. A stable and pure perovskite phase was revealed by X-ray diffraction analysis for all compositions and a symmetry change from rhombohedral to orthorhombic phase was detected beyond 10% of Dy substitution. The incorporation of Dy³⁺ into Sodium Bismuth Titanate (Na_0.5Bi_0.5TiO₃) matrix allows a substantial decrease of the coercive field, an increase in the resistivity, and leads to a high stability of the dielectric permittivity (??/?_(150?°C) ≤?±?15%) over a wide temperature range. Furthermore, this system was found to exhibit improved energy storage properties at high temperatures with a maximum energy density of 1.2?J/cm³ obtained for 2%Dy composition at 200?°C. The obtained results are very promising for energy storage capacitors operating at high temperatures.     

Formulation and in vitro Evaluation of pH-Sensitive Cross-linked Xanthan Gum-Grafted Acrylic Acid Copolymer for Controlled Delivery of Perindopril Erbumine (PE)

A novel xanthan gum-co-acrylic acid superabsorbent hydrogel composite was formulated by free radical polymerization reaction of acrylic acid on xanthan gum. Effect of variables like dynamic swelling ratio, equilibrium swelling ratio, drug loading and drug release was investigated. Swelling ratio increases with decrease in crosslinker concentration. Drug release studies were conducted in pH 7.4 and 0.1N HCl. In acidic environment, drug release was low whereas it was sustained release in alkaline. XG4 showed significant swelling and drug release up to 24?hr. Physicochemical evaluation also confirmed it was optimized formulation. Hence XG4-co-AA was optimized for once daily dose of Perindopril Erbumine.     

Duodenal erosions and ulcers in patients with pancreatobiliary obstruction

The authors compared in a controlled clinical study two groups of patients after a first renal transplantation treated by triple drug immunosuppressive therapy. In a group of 31 patients the triple combination comprised Sandimmune Neoral. In the control group there were 30 patients who received Sandimmune. No differences were found between the two groups as regards the effectiveness of this treatment and the authors did not confirm a lower incidence of rejections described in patients treated with Sandimmune Neoral. They confirmed, however, a lower interindividual variability of Cy-A levels assessed specifically in patients treated with Sandimmune Neoral.     

Investigation of the power dissipation during IGBT turn-off using a new physics-based IGBT compact model

New compact models of the IGBTs (both non-punch through IGBT (NPTIGBT) and punch-through IGBT (PTIGBT)) are presented in this paper. The models are implemented in the SABER circuit simulator and used for a study of IGBT anode current and voltage characteristics during a device turn-off (clamped inductive load circuit with gate controlled turn-off), since these parts of the transient characteristics essentially predict the power dissipation (V×I) inside the device. It is shown that PTIGBTs are faster than NPTIGBTs, this becoming more apparent at higher clamp voltages.     

Molecular characterization of erythrocyte glucose-6-phosphate dehydrogenase deficiency in Al-Ain District, United Arab Emirates

Operational skills involved in controlling a motor vehicle were measured in two groups of very healthy elderly drivers and a young control group to test the hypothesis that there are age-related declines in operational performance that may influence driver safety. An actual behind-the-wheel, standardized road test was employed using a motor vehicle equipped with sensors to record speed, braking activity, and lane position, as well as direction and magnitude of front-wheel and eye-movement excursions. The data from these sensors were used as dependent measures of operational performance. Older drivers made fewer steering and eye-movement excursions and drifted across the center line more frequently than the young control group. Younger drivers drove significantly faster and executed more braking applications than did their older counterparts. The motor-vehicle operational performance of older healthy drivers was related to visual-spatial attentional declines and the useful field of vision associated with the normal aging process.     

Acquired carnitine abnormalities in critically ill children

In order to characterize the role of carnitine during metabolic stress, we prospectively determined carnitine profiles in plasma and urine on admission, days 2, 5, 10 and 15, among 28 critically ill children free of any known conditions associated with secondary carnitine deficiency. More than 25% of plasma and 50% of urinary carnitine measurements were abnormal; 96% (27/28) of patients displayed on at least one occasion an abnormal [< -2 SD or > +2 SD] carnitine value in plasma. Three children had extremely low [< 10 micromol/l] free carnitine (FC) levels in plasma. Plasma esterified and FC levels on admission were not related to the risk of mortality [PRISM score], to muscle lysis [CK values], and to the caloric intake. Levels of FC and esterified carnitine in plasma were unrelated to those measured in urine. Conclusion: Abnormal plasma and urine carnitine measurements are frequently found in critically ill children; the biological significance of these perturbations remains unclear. Caution must be exercised before concluding that an abnormal carnitine value is indicative of an underlying hereditary metabolic disorder in this population.