Long-term sensor measurements of lung deposited surface area of particulate matter emitted from local vehicular and residential wood combustion sources

Abstract

Lung deposited surface area (LDSA) is a relatively new metric that has been argued to be more accurate at predicting health effects from aerosol exposure. For typical atmospheric aerosol, the LDSA concentration depends mainly on the concentration of ultrafine particles (e.g. vehicular exhaust emissions and residential wood combustion) and therefore optical methods cannot be used to measure and quantify it. The objective of this study was to investigate and describe typical characteristics of LDSA under different urban environments and evaluate how a diffusion charging-based Pegasor AQ Urban sensor (Pegasor Ltd., Finland) can be used as an alternative to optical sensors when assessing local combustion emissions and respective LDSA concentrations. Long-term (12?months) sensor measurements of LDSA were carried out at three distinctly different measurement sites (four sensor nodes) in the Helsinki metropolitan area, Finland. The sites were affected mainly by vehicular exhaust emission (street canyon and urban background stations) and by residential wood combustion (two detached housing area stations). The results showed that the accuracy of the AQ Urban was good (R² = 0.90) for the measurement of LDSA when compared to differential mobility particle sizer. The mean concentrations of LDSA were more than twice as high at the street canyon (mean 22 µm² cm^?3) site when compared to the urban background site (mean 9.4 µm² cm^?3). In the detached housing area, the mean concentrations were 12 µm² cm^?3, and wood combustion typically caused high LDSA peaks in the evenings. High correlations and similar diurnal cycles were observed for the LDSA and black carbon at street canyon and urban background stations. The utilization of a small-scale sensor network (four nodes) showed that the cross-station variability in hourly LDSA concentrations was significant in every site, even within the same detached housing area (distance between the two sites ～670?m).     

Microring resonator channel dropping filters

Microring resonators side coupled to signal waveguides provide compact, narrow band, and large free spectral range optical channel dropping filters. Higher order filters with improved passband characteristics and larger out-of-band signal rejection are realized through the coupling of multiple rings. The analysis of these devices is approached by the novel method of coupling of modes in time. The response of filters comprised of an arbitrarily large dumber of resonators may be written down by inspection, as a continued fraction. This approach simplifies both the analysis and filter synthesis aspects of these devices     

Chemistry of hydrogen sulphide under coal liquefaction conditions: 1. Modelling hydrogen transfer catalysis

The work reported here represents initial attempts to develop a complete kinetic and mechanistic understanding of the reaction chemistry of H₂S under coal liquefaction conditions, using both model systems and coal. Hydrogen sulphide was found to promote/catalyse the transfer of hydrogen from tetralin to 2-hydroxyquinoline (2-HOQ). The presence of H₂S can increase the rate of hydrogen transfer from tetralin to 2-HOQ by a factor of 10 compared with the same reaction run in the absence of H₂S. The energy of activation for hydrogen transfer was found to decrease by ≈5 kcal mol⁻¹ in the presence of H₂S. The presence of H₂S was also found to promote loss of oxygen from 2-HOQ to form small amounts of quinoline. No evidence of CC or CN bond cleavage in 2-HOQ was noted under any of the reaction conditions studied. These results suggest that the presence of H₂S reduces the temperatures necessary to promote effective hydrogen transfer from tetralin by 50–75 °C. Moreover, they imply that similar effects occur in H₂S-promoted coal liquefaction.     

Validation of the Climate-SAF surface broadband albedo product: Comparisons with in situ observations over Greenland and the ice-covered Arctic Ocean

This paper describes a validation study performed by comparing the Climate-SAF Surface Albedo Product (SAL) to ground truth observations over Greenland and the ice-covered Arctic Ocean. We compare Advanced Very High Resolution Radiometer (AVHRR)-based albedo retrievals to data from the Greenland Climate Network (GCN) weather stations and the floating ice station Tara for polar summer 2007. The AVHRR dataset consists of 2755 overpasses. The overpasses are matched to in situ observations spatially and temporally. The SAL algorithm presented here derives the surface broadband albedo from AVHRR channels 1 and 2 using an atmospheric correction, temporal sampling of an empirical Bidirectional Reflectance Distribution Function (BRDF), and a narrow-to-broadband conversion algorithm. The satellite product contains algorithms for snow, sea ice, vegetation, bare soil, and water albedo. At the Summit and DYE-2 stations on the Greenland ice sheet, instantaneous SAL RMSE is 0.073. The heterogeneous surface conditions at satellite pixel scale over the stations near the Greenland west coast increase RMSE to > 0.12. Over Tara, the instantaneous SAL RMSE is 0.069. The BRDF sampling approach reduces RMSE over the ice sheet to 0.053, and to 0.045 over Tara. Taking into account various sources of uncertainty for both satellite retrievals and in situ observations, we conclude that SAL agrees with in situ observations within their limits of accuracy and spatial representativeness.     

Efficient sparse voxel octrees

In this paper, we examine the possibilities of using voxel representations as a generic way for expressing complex and feature-rich geometry on current and future GPUs. We present in detail a compact data structure for storing voxels and an efficient algorithm for performing ray casts using this structure. We augment the voxel data with novel contour information that increases geometric resolution, allows more compact encoding of smooth surfaces, and accelerates ray casts. We also employ a novel normal compression format for storing high-precision object-space normals. Finally, we present a variable-radius postprocess filtering technique for smoothing out blockiness caused by discrete sampling of shading attributes. Based on benchmark results, we show that our voxel representation is competitive with triangle-based representations in terms of ray casting performance, while allowing tremendously greater geometric detail and unique shading information for every voxel. Our voxel codebase is open sourced and available at http://code.google.com/p/efficient-sparse-voxel-octrees/.     

Selecting and conserving lands for biodiversity: The role of remote sensing

A major focus of conservation is on protecting areas to ensure the persistence of biological diversity. Because such areas may be large, not easily accessible, subject to change, and sensitive to the surrounding landscape, remote sensing can be a valuable tool in establishing and managing protected areas. We describe three case studies to illustrate how remote sensing can contribute to setting priorities for conservation actions, monitoring the status of conservation targets, and evaluating the effectiveness of conservation strategies. In the Connecticut River watershed, remote sensing has been used to assess flood regimes and identify key areas of floodplain forests and their context for conservation planning. At Eglin Air Force Base in Florida, remote sensing has provided information to assess the effectiveness of management strategies to restore fire to the longleaf pine sandhills ecosystem, control invasive species, and prioritize annual prescribed burns. In eastern US forests, remote sensing is being used to evaluate the ecological condition and changes at properties where direct access would be difficult.As the resolution and capacities of remote-sensing technology continue to develop, however, several issues are becoming increasingly important. It is essential that the spatial and temporal resolution of remote-sensing data be matched to the relevant scales of biodiversity, major threats, and management actions. Data layers must be compatible, both in scale and in measurement properties, and key patterns must be distinguished from irrelevant detail, especially at the finer scales of application in local management. Combining remote sensing with ground surveys can expand the array of information used in management and contribute to the ecological interpretation of remote-sensing data. Because conservation funds are always limited, remote sensing also must be cost effective. This requires balancing the wealth of detail afforded by ever-finer resolution of remote-sensing data with what is actually needed to implement sound conservation and management. Remote sensing is a valuable tool, but it is not a panacea for all of the challenges of conservation monitoring and management.     

BOAR: an advanced HW/SW coemulation environment for DSP system development

The BOAR emulation system is targeted to hardware/software (HW/SW) codevelopment of advanced embedded DSP and telecom systems. The challenge of the BOAR system is efficient customization of programmable hardware, and dedicated partitioning routine to target applications and structures, which allows quite high overall system performance. The system allows multiple configurations for communication between processors and field programmable gate arrays (FPGAs) making the BOAR system an efficient tool for real-time HW/SW coverification. The reprogrammable hardware of the emulation tool is based on four Xilinx 4000-series devices, two Texas TMS320C50 signal processors and one Motorola MC68302 microcontroller. With current devices the BOAR hardware provides approximately 40–70 kgates of logic capacity in DSP applications. The emulation capacity can be expanded by connecting several similar boards in chain. The system has also a versatile internal reprogrammable test environment for test bench development, performance evaluations and design debugging. The logic development environment is based on the Synopsys synthesis tools and an automatic design management software, which performs resource mapping and performance-driven design partitioning between FPGAs. The emulation hardware is currently connected to logic and software development environments via an RS-232C bus. The BOAR emulation system has been found a very efficient platform for real-life prototyping of different types of DSP algorithms and systems, and validating correct functionality of a VHDL macro library.     

How much nitrogen is fixed by biological symbiosis in tropical dry forests? 2. Herbs

Although biological nitrogen fixation (BNF) is considered the main input of N in mature and regenerating native tropical vegetation, it has seldom been quantified. Biomass and N accumulation and fixation were determined for spontaneously occurring herbaceous species in caatinga areas in four regeneration stages (2, 17, 39 and >50?years after abandonment from agricultural use). BNF was estimated using the ¹⁵N natural-abundance method. The 2-year regeneration area had the highest total herb (6,355?kg?ha^?1) and legume (262?kg?ha^?1) biomass production, N stocks (82?kg?ha^?1) and fixed N (5.0?kg?ha^?1). N₂-fixing legumes (nine species in the sampled area) contributed over 97?% of legume biomass in all areas. Macroptilium gracile added the largest amount of N (3.9?kg?ha^?1 in the 2-year regeneration area) because of its large biomass production (205?kg?ha^?1), although it was not the species with the highest proportion of fixed N (76?%). All of the N₂-fixing species obtained large proportions of their N from symbiosis, most of them more than 50?%.However, the amounts of fixed N per unit area were relatively low (0.22?C5.00?kg?ha^?1) because the biomass of N₂-fixing species was always less than 5?% of the total herb biomass.