Impossible and ambiguous shading patterns

A smooth object depicted in a monochrome image will often exhibit brightness variation, or shading. A problem much studied in computer vision has been that of how object shape may be recovered from image shading. When the imaging conditions are such that an overhead point-source illuminates a smooth Lambertian surface, the problem may be formulated as that of finding a solution to an eikonal equation. This article will focus on the existence and uniqueness of such solutions, reporting recent results obtained. With regard to existence, shading patterns are exhibited for which there is no corresponding object shape. Specifically, a necessary and sufficient condition is presented for a circularly symmetric eikonal equation to admit exclusively unbounded solutions; additionally, a sufficient condition is given for an eikonal equation to have no solution whatsoever. In connection with uniqueness, we consider eikonal equations, defined over a disc, such that the Euclidean norm of the gradient of any solution is circularly symmetric, vanishes exactly at the disc center, and diverges to infinity as the circumference of the disc is approached. Contrary to earlier influential work, a class of such eikonal equations is shown to possess simultaneously circularly symmetric and noncircularly symmetric bounded smooth solutions.     

Towards Increased Understanding of Open Data Use for Software Development

Information Systems Frontiers - The way open data resources of varied type and volume are used by software applications remains only partly known. In this study, following CRoss-Industry Standard...     

Path Loss Modelling for Location Service Applications

The aim of this paper is the path loss modelling for the radiolocation services in radio communication networks, particularly in cellular networks. The main results of the measurements obtained in the physical layer of the UMTS are introduced. A new method for the utilization of the multipath propagation phenomenon to improve the estimation of the distance between the MS （mobile station） and the BS （base station） is outlined. This method significantly increases the quality of location services in systems which use a radio interface with DS （direct sequence） CDMA （code division multiple access）.     

Temperatures in linguistics as a model of thermodynamics

Natural languages have been taken as models of systems with strong statistical correlations. In such systems the usual probabilistic limiting laws (Gauss etc.) are no more valid and the concept of higher order temperatures can be applied. It has been shown that this is the case in such languages as English, German, French, Russian and Japanese, for letter and word statistics. The corresponding temperatures (up to the 5-th order), entropies and statistical moments have been calculated and their mutual relations have been checked.... erst wenn du plötzlich Fänger wirst des Balles, den eine ewige Mitspielerin dir zuwarf, ... erst dann ist Fangen-können ein Vermögen, nicht deines, einer Welt.(... only when you suddenly catch the ball which the eternal fellow player throws to you,... only then the catching ability is an accomplishment, not of you, but of the world.)R. M. Rilke (from the motto of [3])Supported by Committee of Scientific Research, Warsaw (KBN), Project Nr. 20412 91 01.     

Miniaturized ceramic differential scanning calorimeter with integrated oven and crucible in LTCC technology

A miniaturized ceramic differential scanning calorimeter (MC-DSC) with integrated oven and crucible is presented. Despite its small size of only 11 mm × 39 mm × 1.5 mm, all functions of a conventional DSC apparatus are integrated in this novel device - including the oven. The MC-DSC is fully manufactured in thick-film and green glass ceramic tape-based low temperature co-fired ceramics (LTCC) technology. Therefore, production costs are considered to be low. Initial results using indium as a sample material show a good dynamic performance of the MC-DSC. Full width at half maximum of the melting peak is 2.4 °C (sample mass approx. 11 mg, heating rate approx. 50 °C/min). Repeatability of the indium melting point is within ±0.02 °C. The melting peak area increases linearly with the sample mass up to at least 26 mg. Simulations of a strongly simplified finite element model of the MC-DSC are in a good agreement with measurement results allowing a model-based prediction of its basic characteristics.     

Modification of Fe and Al elemental powders’ sintering with addition of magnesium and magnesium hydride

An attempt to modify sintering of iron and aluminium elemental powders with use of small additions of Mg and MgH₂ was presented in this paper. The kinetics of such modified sintering was investigated using DSC technique, XRD analysis and SEM observations. Significant changes in the mechanism of exothermal formation reaction of Fe–Al intermetallic phases in compositions doped with magnesium and its hydride was observed. Initiation temperature of Self-propagating High-temperature Synthesis (SHS) reaction was pronouncedly shifted to lower value as compared with undoped composition. Influence of additions on the SHS reaction kinetics parameters was also calculated with use of the JMA model and changes of the Avrami exponent value of specific phase formation was noticed. Positive effect of MgH₂ addition on partial homogeneity of final product was also studied.     

MDO: assessment and direction for advancement—an opinion of one international group

This paper is a summary of topics presented and discussed at the 2006 European–U.S. Multidisciplinary Optimization (MDO) Colloquium in Goettingen, Germany, attended by nearly seventy professionals from academia, industry, and government. An attempt is made to accurately reflect the issues discussed by this diverse group, qualified by interest, experience, and accomplishment to present an opinion about the state-of-the-art, trends, and developments in Multidisciplinary Design Optimization. As such, its main purpose is to provide suggestions and stimulus for future research in the field. The predominant content of the colloquium was centered on aerospace, with a few contributions from the automotive industry, and this is reflected in the article. Due to the timeframe that has passed since the conclusion of the workshop, the authors have updated topics where appropriate to reflect observed developments over the past 3 years. Finally, rather than dwelling extensively on past accomplishments and current capabilities in MDO we focus on the needs and identified shortcomings from the colloquium which lead to potential future research directions. A brief MDO background is provided to set the discussion in its proper context.     

Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers