Deployment of a cloud pipeline for real-time visual inspection using fast streaming high-definition images

We investigate the challenges of building an end-to-end cloud pipeline for real-time intelligent visual inspection system for use in automotive manufacturing. Current methods of visual detection in automotive assembly are highly labor intensive, and thus prone to errors. An automated process is sought that can operate within the real-time constraints of the assembly line and can reduce errors. Components of the cloud pipeline include capture of a large set of high-definition images from a camera setup at the assembly location, transfer and storage of the images as needed, execution of object detection, and notification to a human operator when a fault is detected. The end-to-end execution must complete within a fixed time frame before the next car arrives in the assembly line. In this article, we report the design, development, and experimental evaluation of the tradeoffs of performance, accuracy, and scalability for a cloud system.     

Information Population of an Integrated Construction Management System

This paper discusses the future requirements of integrated construction management systems and the need to support the management of large volumes of information on several levels. The solution proposes a combination of an efficient user interface and methods to partially automate the creation of the required information through access to stored information from past projects. The research follows the path being established for integrated construction management systems that rely on a standard representation of the industry's information requirements. By exploring the comprehensive aspects of construction planning for an integrated construction management system, the research demonstrates the usefulness of applying sound information representation structures. Through the application of case-based reasoning, the research advances the concepts of planning tools as they apply to integrated systems. The resulting prototype construction management system has the primary characteristic of assisting the user in the manipulation of information in order to generate the initial information requirements of an integrated construction management system.     

适合消费电子产品的电流转换逻辑技术

消费电子和通信产业正见证着I／O解决方案从并行到高速串行的转变：能够降低成本、简化设计，并具备可延展性，满足全新带宽的要求。这类接口I／O技术的市场潜力巨大，包括移动电话、DVD-RW和高清晰度LCD电视机，而低功耗、低电磁干扰(EMI)和高数据吞吐量在这些应用中极为重要。因此，业界一直致力于设计和开发这些串行I／O，以低功耗提供高速的数据速     

A Dynamic Analysis of a Spatial Manipulator to Determine Payload Weight

This paper presents a methodology whereby the payload weight of a serial manipulator can be determined from a minimum set of sensor data, i.e., joint angle and joint torque measurements. The particular manipulator geometry that is analyzed is a four degree‐of‐freedom serial chain that is commonly used in excavator systems. It was quite remarkable that a relatively simple solution was obtained for the payload weight considering that there are a total of nine unknown moments and cross moments of inertia of the payload together with the unknown location of the center of mass. Example calculations are presented. © 2003 Wiley Periodicals, Inc.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

News: Hunting, fishing, environmental groups join in natural resource alliance

Society.     

Cement versus cementless fixation in total knee arthroplasty

A prospectively studied group of 55 uncemented Press Fit Condylar total knee arthroplasties was compared retrospectively with a matched group of 51 cemented Press Fit Condylar total knee arthroplasties at a mean of 10 years after operation. For the cemented group, the pain and function scores improved from 32 and 45 preoperatively to 95 and 77, respectively. For the uncemented group the scores improved from 33 and 50 preoperatively to 93 and 60, respectively. There were 10 revisions in the uncemented group for femoral or tibial aseptic loosening or osteolysis compared with two revisions in the cemented group. Exclusive of problems related to patellar metal backing, survival to revision for aseptic failure or radiographic loosening was 72% in the uncemented group and 94% in the cemented group at 10 years. A significantly higher revision rate was found in the uncemented compared with cemented total knee arthroplasty of the Press Fit Condylar design.