Investigating the effect of silver nanorods embedded in polydimethylsiloxane matrix using nanoindentation and its use for flexible electronics

The stretchable electrodes with excellent flexibility, electrical conductivity, and mechanical durability are the most fundamental components in the emerging and exciting field of flexible electronics. This article proposes a method for fabrication of such a stretchable electrode by embedding silver nanorods (AgNRs) into a polydimethylsiloxane (PDMS) matrix that is grown by a unique glancing angle deposition technique. The surface, mechanical, and electrical properties of PDMS are significantly changed after embedding the AgNRs in it. The results show that surface roughness and polarity increase after AgNRs are embedded in the PDMS matrix. Elastic modulus (E) and hardness (H) decrease with an increase in the indentation load as a result of the indentation depth effect. Due to strong interfacial adhesion of AgNRs embedded in the PDMS matrix, the E and H of nanocomposite are increased by 167.6 and 93.3% compared with PDMS film, respectively. Furthermore, the AgNRs-PDMS film has an electrical resistivity value in the order of 10⁻⁷ Ωm. It remains conductive during various mechanical strains such as bending, twisting, and stretching, which is demonstrated using a light-emitting diode circuit. Simultaneously, the antimicrobial activity of silver could make it a promising candidate for wearable electronics.     

Effect of gamma irradiation on the optical properties of CR-39 polymer

The UV-Visible absorption spectra of virgin and gamma irradiated (20–800 kGy) CR-39 polymer have been deduced by using Shimadzu Double beam Double Monochromator UV-Visible Spectrophotometer (UV-2550). The existence of the peaks, their shifting and broadening as a result of gamma irradiation has been discussed. Finally the indirect and direct band gap in virgin and gamma irradiated CR-39 has been determined. The values of indirect band gap have been found to be lower than the corresponding values of direct band gap.     

Cornea stress test--evaluation of corneal endothelial function in vivo by contact lens induced stress

Changes in the NHS have supported the idea of targeting health services to those in greatest need. This has meant that health visitors are increasingly having to identify 'vulnerable' families in need of increased health visiting intervention. This paper reports on a qualitative study undertaken in order to explore the ways in which health visitors plan and organize their work in relation to the concept of vulnerability. Focus groups and semi-structured interviews were carried out with health visitors from two separate geographical areas, one an inner city area and the other suburban, in order to explore the criteria by which health visitors define vulnerability and decide to increase their levels of intervention to particular families. It was found that vulnerability was extremely difficult to define but that the health visitors used criteria which were appropriate to the particular localities in which they worked to identify vulnerable families and to increase their levels of intervention to those families. Health visitors were targeting their services within a framework of a basic minimum service to all and were assessing the health needs of individuals or families rather than planning their work on the basis of community or practice profiles.     

Identification and characterization of genus-specific epitopes of Serpulina species using monoclonal antibodies

Four murine monoclonal antibodies (mAbs) designated as C9E8, A10, G12, and G8 which recognized both Serpulina hyodysenteriae and S. innocens were produced and characterized. The mAbs reacted with whole cell antigens in ELISA, indirect immunofluorescence and immunoblot assays. The mAbs did not show any cross reactivity in rapid dot ELISA or immunoblot assay with Leptospira icterohemorrhagiae, Campylobacter jejuni and Escherichia coli. Treatment of whole cell suspension with proteinase K and sodium periodate indicated that the reacting epitopes of the mAbs were protein in nature. The genus-specific antigens were identified as heat-stable proteins with molecular weight in the range of 26 to 45 kDa. Immunofluorescence and immunogold labelling studies showed that the antibody-binding epitopes were exposed on the outer-surface of the spirochaetal cell wall. The mAbs inhibited growth of reference strains of both S. hyodysenteriae and S. innocens in vitro but failed to cause agglutination. The detection of spirochaetal forms directly in fecal smears or paraffin-embeded tissue sections from experimentally infected pigs indicated that such mAbs were potentially useful for the diagnosis of swine spirochaetosis. This is the first report of mAbs identifying and characterizing common antigens of porcine Serpulina.     

Efficient compression and network adaptive video coding for distributed video surveillance

The availability of cheap network based video cameras and the prevalence of wireless networks has lead to a major thrust towards deployment of large scale Distributed Video Surveillance (DVS) systems. This has opened up an important area of research to deal with the issues involved in DVS system for efficient collection and transmission of large scale video streams from the cameras at the guarded sites, to the end users in possibly constrained network conditions. In this paper, we propose a framework based on content-based video classification and scalable compression scheme to provide a robust bandwidth efficient video transmission for DVS. The scheme builds on a Discrete Wavelet Transform (DWT) based Color-Set Partitioning for Hierarchical Trees (CSPIHT) coding to obtain a scalable bitstream. Wavelet domain segmentation and compression assists in development of a DVS architecture. The architecture includes a novel module for dynamic allocation of Network bandwidth based on the current available resources and constraints. Different frame constituents are optimally coded based on their relative significance, perceptual quality, and available estimate of network bandwidth. Experimental result over different video sequences and simulations for Network conditions demonstrate the efficient performance of the approach.     

OS-Guard: on-site signature based framework for multimedia surveillance data management

This paper presents OS-Guard(On-Site Guard), a novel on-site signature based framework for multimedia surveillance data management. One of the major concerns in widespread deployment of multimedia surveillance systems is the enormous amount of data collected from multiple media streams that need to be communicated, observed and stored for crime alerts and forensic analysis. This necessitates investigating efficient data management techniques to solve this problem. This work aims to tackle this problem, motivated by the following observation, more data does not mean more information. OS-Guard is a novel framework that attempts to collect informative data and filter out non-informative data on-site, thus taking a step towards solving the data management problem. In the framework, both audio and video cues are utilized by extracting features from the incoming data stream and the resultant real valued feature data is binarized for efficient storage and processing. A feature selection process based on association rule mining selects discriminant features. A short representative sample of the whole database is generated using a novel reservoir sampling algorithm that is stored onsite and used with an support vector machine to classify an important event. Initial experiments for a Bank ATM monitoring scenario demonstrates promising results.     

Bulk free radical polymerizations of methyl methacrylateunder non-isothermal conditions and with intermediate additionof initiator: Experiments and modeling

Experimental data on the monomer conversion, x_m, and the weight average molecular weight, M_w, have been generated under several isothermal and non-isothermal conditions for the polymerization of methyl methacrylate in a rheometer-reactor assembly. The non-isothermal results, in particular, can be used to provide more stringent tests of kinetic models than isothermal data alone. A simple empirical model has been used to describe this system that accounts for the gel (Trommsdorff) and glass effects. The model involves only x_m and the temperature, and is quite general. The model parameters are tuned using only three sets of isothermal data. Good agreement is found between the experimental results and model predictions for a whole variety of experimental conditions, including non-isothermal operation and with intermediate addition of initiator. Because of its generality, this model is quite suitable for use for on-line optimizing control as well as for describing industrial reactors.     

Low frequency ac conduction and dielectric relaxation behavior of solution grown and uniaxially stretched poly(vinylidene fluoride) films

The measurements of ac conductivity [σ_m(ω)], dielectric constant [?′(ω)] and loss [?″(ω)] have been performed on solution grown (thickness ∼85 μm) and uniaxially stretched (thickness ∼25, 45 and 80 μm) films of poly(vinylidene fluoride) (PVDF) in the frequency range 0.1 kHz-10 MHz and in the temperature range 77-400 K. The σ_m(ω) can be described by the relation σ(ω) = Aω^s, where s is close to unity and decreases with increase in temperature. Three relaxations, observed in the present investigation, have been designated as the α_c-, the α_a- and the β-relaxations appearing from high temperature side to the low temperature side. The α_c-relaxation could not be observed in the case of uniaxially stretched poly(vinylidene fluoride) films. The α_c- and α_a-relaxations are associated with the molecular motions in the crystalline regions and micro-Brownian motion in the amorphous regions of the main polymer chain, respectively, whereas the β-relaxation is attributed to the rotation of side group dipoles or to the local oscillations of the frozen main polymer chain.     

Parallelised production of fine and calibrated emulsions by coupling flow-focusing technique and partial wetting phenomenon

The capacity of microfluidic technology to fabricate monodisperse emulsion droplets is well established. Parallelisation of droplet production is a prerequisite for using such an approach for making high-quality materials for either fundamental or industrial applications where product quantity matters. Here, we investigate the emulsification efficiency of parallelised drop generators based on a flow-focusing geometry when incorporating the role of partial wetting in order to make emulsion droplets with a diameter below 10 μm. Confinement intrinsically encountered in microsystems intensifies the role played by interfaces between liquids and solids. We thus take advantage of partial wetting to enhance the maximum confinement accessible due to liquid flow focusing. We compare the performances brought by partial wetting to more established routes such as step emulsification. We show that the step configuration and the partial wetting regime are both well suited for being parallelised and thus open the way to the production of fine and calibrated emulsions for further applications. Finally, this new route of emulsification that exploits partial wetting between the fluids and the channel walls opens possibilities to the formation of substantially smaller droplets, as required in many fields of application.