Improved method for roadside barrier length of need modeling using real-world trajectories

The 2011 AASHTO Roadside Design Guide (RDG) contains perhaps the most widely used procedure for choosing an appropriate length of need (LON) for roadside barriers. However, this procedure has several limitations. The procedure uses a highly simplified model of vehicle departure, and the procedure does not allow designers to specify an explicit level of protection. A new procedure for choosing LON that addresses these limitations is presented in this paper. This new procedure is based on recent, real-world road departure trajectories and uses this departure data in a more realistic way. The new procedure also allows LON to be specified for a precisely known level of protection – a level which can be based on number of crashes, injury outcomes or even estimated crash cost – while still remaining straightforward and quick to use like the 2011 RDG procedure.     

Lateral ion implant straggle and mask proximity effect

Lateral scattering of retrograde well implants is shown to have an effect on the threshold voltage of nearby devices. The threshold voltage of both NMOSFETs and PMOSFETs increases in magnitude for conventional retrograde wells, but for triple-well isolated NMOSFETs the threshold voltage decreases for narrow devices near the edge of the well. Electrical data, SIMS, and SUPREM4 simulations are shown that elucidate the phenomenon.     

Intergranular corrosion of a light aircraft aluminum alloy propeller

Examination of the wreckage of a light aircraft revealed that approximately 20 cm was missing from one tip of the aluminum alloy propeller. Fractographic and metallographic examination of the remaining portion of the propeller revealed extensive grain-boundary separation in the vicinity of the fracture, and grain edges and corners rounded by corrosion on the fracture surface. Energy dispersive X-ray analysis (EDXA) revealed fluorine on, and in the vicinity of, the fracture surface. In the ensuing litigation, it was asserted that the crash occurred because the propeller fractured in flight as the result of intergranular attack caused by the use of a fluorine-bearing cleaner.     

Prolonged tamoxifen exposure selects a breast cancer cell clone that is stable in vitro and in vivo

The effects of long-term tamoxifen exposure on cell growth and cell cycle kinetics were compared between oestrogen receptor (ER)-positive (MCF-7) and ER-negative (MDA-MB-231) cell lines. In the MCF-7 cell line, prolonged tamoxifen exposure (0.5 mumol/l for > 100 days) blocked cells in G0-G1 of the cell cycle, and slowed the doubling time of cells from 30 to 59 h. These effects corresponded to an increase in the cellular accumulation of tamoxifen over time [mean area under concentration curve (AUC) = 77.92 mumoles/10(6)/cells/day]. In contrast, in the MDA-MB-231 cell line, long-term tamoxifen exposure had no obvious effect on the doubling time, and reduced cellular tamoxifen accumulation (mean AUC = 50.50 mumoles/10(6)/cells/day) compared to the MCF-7 cells. Flow cytometric analysis of MDA-MB-231 cells demonstrated that a new tetraploid clone emerged following 56 days of tamoxifen exposure. Inoculation of the MDA-MB-231 tetraploid clone and MDA-MB-231 wildtype cells into the opposite flanks of athymic nude mice resulted in the rapid growth of tetraploid tumours. The tetraploid tumours maintained their ploidy following tamoxifen treatment for nine consecutive serial transplantations. Histological examination of the fifth transplant generation xenografts revealed that the tetraploid tumour had a 25-30 times greater mass, area of haemorrhage and necrosis, a slightly higher mitotic index and was more anaplastic than the control neoplasm. The control wildtype MDA-MB-231 tumours maintained a stable ploidy following tamoxifen treatment until the eighth and ninth transplantation, when a tetraploid population appeared, suggesting that tamoxifen treatment may select for this clone in vivo. These studies suggest that prolonged tamoxifen exposure may select for new, stable, fast growing cell clones in vitro as well as in vivo.     

Peer evaluation. A visual picture

To meet the criteria of role accountability, nursing competence and ongoing staff development, an improved peer-evaluation system was designed to continuously monitor these new roles. This peer-evaluation process converts evaluation input into data, giving staff a visual picture of how their performance compares within their peer group. This peer-evaluation process was designed as a tool to assist in staff growth and development, not as a punitive system.     

Intralesional radiolabeled human monoclonal IgM in human tumor xenografts

Sensory-perceptual abnormalities in people with autism are discussed from two perspectives: published firsthand accounts and existing psychological research evidence. A range of abnormalities, including hyper- and hyposensitivity, sensory distortion and overload, and multichannel receptivity and processing difficulties, are described in firsthand accounts and frequently portrayed as central to the autistic experience. A number of dangers are inherent in uncritically accepting these accounts at face value and in any wider generalization to the autistic population as a whole. Evidence from clinical studies suggests that unusual sensory responses are present in a majority of autistic children, that they are manifested very early in development, and that they may be linked with other aspects of autistic behavior. In addition, experimental studies using a range of indices have found evidence of unusual responses to sensory stimuli in autistic subjects. However the clinical and experimental research to date suffers from serious methodological limitations and more systematic investigation is warranted. Key issues for future psychological research in the area are identified.     

The contact of elastic regular wavy surfaces

A complete solution in closed form to the elastic contact of a one-dimensional sinusoidal surface with a flat surface was presented by Westergaard in 1939. This paper is concerned with the elastic contact of a two-dimensional sinusoidal surface with a flat. In this case the stress distribution within the elastic solids is three-dimensional. As the load is increased the contact areas change in shape from being circular to square and finally leave a circular region of no contact when the waves are almost squashed flat. The problem is solved in general using a numerical method due to Kalker, but asymptotic solutions in closed form have been found for light loads and also for heavy loads at which contact is almost complete. The variation of the mean separation with load, which determines the volume of the space trapped between the two surfaces, is also found.     

Admiral John A. B. Dahlgren (1809–1870): His life, times and technical work in U.S. naval ordnance

John Dahlgren served in the U.S. Navy for nearly 35 years, sometimes in a sea-keeping capacity but mostly developing large naval artillery. To-day, his name, when recognised by students of naval ordnance, is associated with teh Dahlgren or ‘soda bottle shaped’ gun of 9 to 11 inch calibre. He designed, developed and lived to see his guns installed aboard warships and used to considerable effect, especially in the American Civil War. However, a nearly indistinguishable external design of gun was developed for the Army by T. J. Rodman, an officer now even less known than Dahlgren and whose researches and contributions are virtually forgotten. This paper and that in Ref. [1] attempt to appreciate (along with other technical questions of the period) the different ways pursued by these men towards the final development of the ‘soda bottle shaped’ gun, though it is a matter still not entirely understood.

Both names are totally omitted from several ‘classic’ books on artillery and this is a grave misfortune. Besides trying to throw factual light on the Dahlgren-Rodman controversy and the priority issue (though not one pursued with acrimony by the men themselves at the time), the paper describes Admiral Dahlgren's general career, the books he wrote, the technical problems he attacked and the problematic ordnance discussions of his day, to which he gave his life.

The work of Dahlgren and Rodman, in particular, saw the elevation of American gun design from the level of mere copying (of early Columbiads in the first decades of the century) to that which compelled attention from, and study by, the super-powers of the day, Great Britain, France and Russia.