Evaluation of biodegradability and oxidation degree of hospital wastewater using photo-Fenton process as the pretreatment method

In this work, the photo-Fenton process was used for the pretreatment of hospital wastewater with the objective of improving its overall biodegradability and determining the degree of increased oxidation. The chemical oxygen demand (COD), 5-day biochemical oxygen demand (BOD5), total organic carbon (TOC) and toxicity towards the gram negative marine bioluminescent bacteria of the species V. fischeri were selected as the environmental sum parameters to follow the performance of this process. The enhancement of biodegradability, evaluated in terms of the BOD5/COD ratio, increased from 0.3 to 0.52 and the oxidation degree, calculated in terms of AOS, leveled up from -1.14 to +1.58 at the optimum conditions; a dosage ratio of COD:H2O2:Fe(II) at 1:4:0.1, and a reaction pH of 3. The reduction in the inhibition percentage from the toxicity test indicated the safe levels for micro-organisms in degrading the residual organic substance in this method. Almost total removal percentages of COD, BOD5, and TOC were found by a sequential activated sludge process for the pre-treated wastewater. Results obtained from this work indicated that the photo-Fenton process could be a suitable pretreatment method in reducing toxicity of pollutants and enhancing biodegradability of hospital wastewaters treated in a coupled photochemical-biological system.     

Enhanced paraquat removal from contaminated water using cell-immobilized biochar

Clean Technologies and Environmental Policy - The efficient performance of cell-immobilized biochar in removing paraquat (PQ) from contaminated water is described in this work. Pseudomonas putida...     

Chromium behavior during cement-production processes: a clinkerization, hydration, and leaching study

The behavior of chromium during the production of cement clinker, during the hydration of cement and during the leaching of cement mortars was investigated. The microstructures of clinker and mortar properties were investigated using free lime, XRD, SEM/EDS, and TG/DTA techniques. Chromium was found to be incorporated in the clinker phase. The formation of new chromium compounds such as Ca(6)Al(4)Cr(2)O(15), Ca(5)Cr(3)O(12), Ca(5)Cr(2)SiO(12), and CaCr(2)O(7), with chromium oxidation states of +3, +4.6, +5, and +6, respectively, was detected. After the hydration process, additional chromium compounds were identified in the mortar matrix, including Ca(5)(CrO(4))(3)OH, CaCrO(4)·2H(2)O, and Al(2)(OH)(4)CrO(4), with chromium oxidation states of +4.6, +6, and +6, respectively. Additionally, some species of chromium, such as Cr(3+) from Ca(6)Al(4)Cr(2)O(15) and Cr(6+) from CaCr(2)O(7), CaCrO(4)·2H(2)O, and Al(2)(OH)(4)CrO(4), were leached during leaching tests, whereas other species remained in the mortar. The concentrations of chromium that leached from the mortar following U.S. EPA Method 1311 and EA NEN 7375:2004 leaching tests were higher than limits set by the U.S. EPA and the Environment Agency of England and Wales related to hazardous waste disposal in landfills. Thus, waste containing chromium should not be allowed to mix with raw materials in the cement manufacturing process.     

NaOH-activated ground fly ash geopolymer cured at ambient temperature

NaOH-activated ground fly ash geopolymers, cured at room temperature, were studied in this paper. Ground fly ash (GFA), with a median particle size of 10.5 μm, was used as source material. NaOH concentrations of 4.5-16.5 M (M) were used as an alkali activator. Compressive strength tests and microstructure observations using SEM, EDX, XRD and FTIR were performed. Results indicated that GFA gave higher strength geopolymer paste compared to original fly ash. Ground fly ash could be used as a source material for making geopolymers cured at room temperature. An increase in NaOH concentration from 4.5 to 14.0 M increased the strength of GFA geopolymer pastes. Microstructure studies indicated that NaOH concentrations of 12.0-14.0 M created new crystalline products of sodium aluminosilicate. The compressive strengths at 28 days of 20.0-23.0 MPa were obtained with the NaOH concentrations of 9.5-14.0 M. Increasing the NaOH concentration beyond this point resulted in a decrease in the strength of the paste due to early precipitation of aluminosilicate products.     

Degradation and detoxification of formaline wastewater by advanced oxidation processes

In this study, advanced oxidation processes (AOPs) utilizing the combinations of UV/H(2)O(2), Fenton, photo-Fenton and the combination of Fenton/photo-Fenton reactions were investigated in lab-scale experiments for the degradation of formaline wastewater. The studied toxic chemicals were formaldehyde and methanol in mixture solution, so-called formalin, which is the embalming agent in mortuaries. The experimental results showed that the photo-Fenton process was the most effective treatment process among the studied AOPs. Pseudo-first-order degradation rate constants of formaldehyde and methanol were obtained from batch experimental data. In the combination of Fenton/photo-Fenton reactions, the results show that applying UV light at an early stage of the reaction might not be necessary for a speedy oxidation reaction of the Fenton process. With Fenton and photo-Fenton processes, mineralization of formaline wastewater can be achieved, as no residual TOC is detected in the effluent after the reaction period. It is suggested that Fenton and photo-Fenton processes are viable techniques for the formaline wastewater treatment as they were able to provide high degradation of formaldehyde and methanol with relatively low toxicity of the by-products in the effluent.     

Visible light absorption ability and photocatalytic oxidation activity of various interstitial N-doped TiO2 prepared from different nitrogen dopants

Nitrogen-doped TiO₂ was developed to enable photocatalytic reactions using the visible range of the solar spectrum. This work reports on the synthesis, characterisation and kinetic study of interstitial N-doped TiO₂ prepared by the sol–gel method using three different types of nitrogen dopants: diethanolamine, triethylamine and urea. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and UV–visible spectroscopy were used to analyse the titania. Different interstitial N-doped TiO₂ properties, such as absorption ability in the UV–visible light region, redshift in adsorption edge, good crystallisation and composition ratio of titania structures (anatase and rutile) could be obtained from different nitrogen dopants. Amongst investigated nitrogen precursors, diethanolamine provided the highest visible light absorption ability of interstitial N-doped TiO₂ with the smallest energy bandgap and the smallest anatase crystal size, resulting in the highest efficiency in 2-chlorophenol degradation. The photocatalytic activity of all N-doped TiO₂ can be arranged in the following order: TiO₂/diethanolamine > TiO₂/triethylamine > TiO₂/urea > un-doped TiO₂. The initial rate of 2-chlorophenol degradation using the interstitial N-doped TiO₂ with diethanolamine was 0.59 mg/L-min and the kinetic constant was 2.34 × 10⁻² min⁻¹ with a half-life of 98 min. In all cases, hydroquinone was detected as a major intermediate in the degradation of 2-chlorophenol.