Effect of 100 KeV Ar+ ion beam irradiation on ZnO thin films – Influence of morphology vis-a-vis electrode/electrolyte interface and its impact on photoelectrochemical water splitting

The present study attempts quantitative determination of changes in the morphological surface features viz. fractal dimension, lower and upper cut off length scale through Power Spectral Density analysis prior to and after irradiation of 100 KeV Ar⁺ ion beam at incidence angles of 0°, 40° and 60° on ZnO thin films. All the unirradiated and irradiated samples are subjected to photoelectrochemical characterization and a correlation between photoelectrochemical performance and morphological parameters is established. Sample irradiated at 40° angle at the fluence of 5 × 10¹⁶ ions/cm² is found to possess maximum fractal dimension of 2.72, lower and upper cut off length scale of 3.16 nm and 63.00 nm respectively. This sample exhibits maximum photocurrent density of 3.19 mA/cm² and applied bias photon-to-current efficiency of 1.12% at 1.23 V/RHE. Hydrogen gas collected for duration of 1 h for the same sample was ~4.83 mLcm^?2.     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.     

Synthesis of poly(vinyl propionate) from poly(vinyl alcohol) in nonaqueous medium using ethyl nitrate dimethyl sulfoxide as a catalyst

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂·DMSO. From the PVA solution, poly(vinyl propionate), PVPR was prepared by the homogeneous esterification of PVA with propionic acid. The ester thus formed contained some unconverted hydroxyl group. The formation of the ester was confirmed by the IR and ¹H‐NMR spectra. The molecular weight of the ester was determined by GPC and intrinsic viscosity (η) was determined by viscometric method. Glass transition temperature, T_g, was obtained from differential scanning calorimetric (DSC) analysis. Thermal stabilities of the ester were checked by thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. The efficiency of the ester as a flow improver of crude oil was also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5675–5679, 2006     

A Novel Contour Tracing Algorithm for Object Shape Reconstruction Using Parametric Curves

Parametric curves such as Bézier and B-splines, originally developed for the design of automobile bodies, are now also used in image processing and computer vision. For example, reconstructing an object shape in an image, including different translations, scales, and orientations, can be performed using these parametric curves. For this, Bézier and B-spline curves can be generated using a point set that belongs to the outer boundary of the object. The resulting object shape can be used in computer vision fields, such as searching and segmentation methods and training machine learning algorithms. The prerequisite for reconstructing the shape with parametric curves is to obtain sequentially the points in the point set. In this study, a novel algorithm has been developed that sequentially obtains the pixel locations constituting the outer boundary of the object. The proposed algorithm, unlike the methods in the literature, is implemented using a filter containing weights and an outer circle surrounding the object. In a binary format image, the starting point of the tracing is determined using the outer circle, and the next tracing movement and the pixel to be labeled as the boundary point is found by the filter weights. Then, control points that define the curve shape are selected by reducing the number of sequential points. Thus, the Bézier and B-spline curve equations describing the shape are obtained using these points. In addition, different translations, scales, and rotations of the object shape are easily provided by changing the positions of the control points. It has also been shown that the missing part of the object can be completed thanks to the parametric curves.     

Augmented photoelectrochemical response of CdS/ZnS quantum dots sensitized hematite photoelectrode

A visible light active and stable photoelectrode has been developed by depositing a passivating layer of ZnS QDs on CdS QDs sensitized hematite photoelectrode (Hematite‐CdS/ZnS) for PEC generation of hydrogen. Photoelectrochemical properties, in terms of stability and efficiency, have been investigated on the various hematite photoelectrodes sensitized with CdS QDs and CdS/ZnS QDs by varying number of SILAR cycles. I–V characteristics show that two layers of ZnS QDs deposited over three layers of CdS could enhance PEC response of hematite and efficiency by a factor of 3 and 11 respectively. Chronoamperometry measurement ensures that after adding a layer of ZnS QDs, CdS sensitized hematite film turns out to be a stable photoelectrode in the electrolyte. Prepared photoelectrodes have been characterized by XRD, SEM, HRTEM and UV–Vis spectrophotometer for various structural, morphological and optical properties to analyze PEC results. Mott–Schottky analysis and incident photon to current conversion efficiency (IPCE) measurements of sensitized hematite photoelectrode supported the improved PEC response of CdS/ZnS QDs sensitized hematite thin films. Copyright © 2016 John Wiley & Sons, Ltd.     

Nanostructured Zn-Fe2O3 thin film modified by Fe-TiO2 for photoelectrochemical generation of hydrogen

Nanostructured semiconductor thin films of Zn-Fe₂O₃ modified with underlying layer of Fe-TiO₂ have been synthesized and studied as photoelectrode in photoelectrochemical (PEC) cell for generation of hydrogen through water splitting. The Zn-Fe₂O₃ thin film photoelectrodes were designed for best performance by tailoring thickness of the Fe-TiO₂ film. A maximum photocurrent density of 748 μA/cm² at 0.95 V/SCE and solar to hydrogen conversion efficiency of 0.47% was observed for 0.89 μm thick modified photoelectrode in 1 M NaOH as electrolyte and under 1.5 AM solar simulator. To analyse the PEC results the films were characterized for various physical and semiconducting properties using XRD, SEM, EDX and UV–Visible spectrophotometer. Zn-Fe₂O₃ thin films modified with Fe-TiO₂ exhibited improved visible light absorption. A noticeable change in surface morphology of the modified Zn-Fe₂O₃ film was observed as compared to the pristine Zn-Fe₂O₃ film. Flatband potential values calculated from Mott–Schottky curves also supported the PEC response.     

粘土的抗剪强度指标试验对比分析

抗剪强度是土的重要力学性能之一,室内剪切试验主要有直剪试验、三轴试验、无侧限抗压强度试验。实际工程中常采用较为简便的室内直剪试验来确定土体抗剪强度中内摩擦角φ和黏聚力c。试验表明,对同样性质土样进行直剪试验和三轴压缩试验得出的内摩擦角φ和黏聚力c相差较大。说明了两者之间的差异。     

Preclinical Anticancer Activity of DNA-based Cleavage Molecules

ABSTRACT

Deoxyribozymes (DNAzymes) are DNA residue-based molecules capable of specific cleavage of complementary mRNA. As such, they are more stable counterparts for the earlier discovered ribozymes. A handful of studies have shown the potential of DNAzymes against cancer both in cell culture and importantly in vivo models. This relatively new molecular entity may progress to clinical trials provided that more extensive testing is carried out at the preclinical stage. While a significant amount of work has gone into chemically stabilizing the molecule, delivery is one area that needs particular attention.     

Lattice Boltzmann Simulation of Two- and Three-Dimensional Incompressible Thermal Flows

This work is concerned with the application of the thermal lattice Boltzmann method (TLBM) to compute incompressible two- and three-dimensional flows in cavities. Two convection test cases, namely, the laminar flow in a differentially heated square cavity and a cubic cavity, are numerically analyzed through TLBM. The internal energy density distribution function approach with two three-dimensional particle velocity models, namely, the 15-velocity and the 19-velocity, and a two-dimensional model, namely, the nine-velocity, have been used in the present work. Computations are carried out for laminar flows in a differentially heated square cavity and a cubical cavity (Rayleigh numbers = 10³ to 10⁵). The boundary conditions used are stable and of good accuracy. To lend credibility to the thermal lattice Boltzmann model square cavity results, they are further compared with those obtained from a finite-difference-based code developed for this purpose.     

Self-esteem development from young adulthood to old age: A cohort-sequential longitudinal study.

The authors examined the development of self-esteem from young adulthood to old age. Data came from the Americans’ Changing Lives study, which includes 4 assessments across a 16-year period of a nationally representative sample of 3,617 individuals aged 25 years to 104 years. Latent growth curve analyses indicated that self-esteem follows a quadratic trajectory across the adult life span, increasing during young and middle adulthood, reaching a peak at about age 60 years, and then declining in old age. No cohort differences in the self-esteem trajectory were found. Women had lower self-esteem than did men in young adulthood, but their trajectories converged in old age. Whites and Blacks had similar trajectories in young and middle adulthood, but the self-esteem of Blacks declined more sharply in old age than did the self-esteem of Whites. More educated individuals had higher self-esteem than did less educated individuals, but their trajectories were similar. Moreover, the results suggested that changes in socioeconomic status and physical health account for the decline in self-esteem that occurs in old age. (PsycINFO Database Record (c) 2010 APA, all rights reserved)