Substitutes for 1-naphthylamine. Part 1-a comparative study of monoazo anionic dyes from 5-acetaniidoaniline-2-sulphonic acid and 1-naphthylamine

5-Acetamidoaniline-2-sulphonic acid has been evaluated as a substitute for 1-naphthylamine by synthesising and evaluating a parallel series of monoazo dyes derived from both components.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...     

Using a soft core in a SoC design: experiences with picoJava

Through our experience in synthesis, validation, test, and integration of the picoJava processor core in a system-on-chip (SoC) design we point out the challenges faced and issues to address in efficient reuse of a soft core     

High performance multi-layer varistor (MLV) from doped ZnO nanopowders by water based tape casting: Rheology,sintering, microstructure and properties

In this work, we report the fabrication of a high performance multi-layer varistor (MLV) via water based tape casting method using novel compositions of nanomaterials. Bi₂O₃, CaO and Co₃O₄ doped ZnO nanopowders were prepared by solution combustion synthesis (SCS) route, calcined at different temperatures (550, 650, 750 and 850?°C) and characterized by TEM, XRD, SEM and AFM. The nanopowder (crystallite size ~30?nm) calcined at 650?°C for 1?h was used as the starting material for MLV fabrication. Compositions of the slurry containing doped ZnO nanopowders, binder and plasticizer in water solvent were optimized for the fabrication of thick film. The rheological properties of the slurries having different solid loadings were analysed and thick films of various thicknesses (50–500?µm) were prepared by varying the feeding rate of tape casting. The film roughness of 38.3?nm for the thick film made from 40?wt% solid slurry was found to be superior compared to other samples due to the presence of reduced crack and shrinkage. MLV fired at 950?°C for 1.5?h exhibited a coefficient of nonlinearity of 18 and breakdown voltage of 291.5?V that yields superior properties compared to commercial MLVs.     

Comparative study to use nanofluid ZnO and CuO with phase change material in photovoltaic thermal system

In this study, the simultaneous use of nanofluid and phase changing material as a coolant for photovoltaic fluid collector system and its effects are investigated experimentally. Two types of nanofluid are taken for the consideration, that is, ZnO and CuO, which are water‐based fluid. The experiments are performed in five different types of photovoltaic thermal system conventional: PT, PVT (ZnO), PVT (CuO), PCM medium (PVT/PCM/ZnO), and PCM medium (PVT/PCM/CuO). The results are obtained for surface temperature, energy, and thermal efficiency, and it is compared with each other. Further, the effect of the nanofluid as the effective alternative for pure deionized water is measured. From the results, it is evident that the PVT/PCM/CuO system minted 15% high electric output compared with convention module. Furthermore, the addition of the CuO nanofluid increases the thermal output significantly up to 8% for PVT and 12% for PCM without energy consumption. It also found that the nanofluid increases the overall energy efficiency of the system compared with convention PV.     

In situ synthesised TiO2 ‐chitosan‐chondroitin 4–sulphate nanocomposites for bone implant applications

The artificial materials for bone implant applications are gaining more importance in the recent years. The series titania‐chitosan‐chondroitin 4–sulphate nanocomposites of three different concentrations (2:1:x, where x ‐ 0.125, 0.25, 0.5) have been synthesised by in situ sol–gel method and characterised by various techniques. The particle size of the nanocomposites ranges from 30–50 nm. The bioactivity, swelling nature, and the antimicrobial nature of the nanocomposites were investigated. The swelling ability and bioactivity of the composites is significantly greater and they possess high zone of inhibition against the microorganisms such as Staphylococcus aureus and Escherichia coli. The cell viability of the nanocomposites were evaluated by using MG‐63 and observed the composites possess high cell viability at low concentration. The excellent bioactivity and biocompatibility makes these nanocomposites a promising biomaterial for bone implant applications.Inspec keywords: titanium compounds, filled polymers, nanocomposites, bone, orthopaedics, biomedical materials, sol‐gel processing, nanofabrication, particle size, swelling, microorganisms, cellular biophysics, nanomedicine, prostheticsOther keywords: in situ synthesised TiO₂ ‐chitosan‐chondroitin 4‐sulphate nanocomposites, bone implant applications, artificial materials, in situ sol‐gel method, particle size, swelling nature, antimicrobial nature, microorganisms, Staphylococcus aureus, Escherichia coli, cell viability, MG‐63, biomaterial, size 30 nm to 50 nm, TiO₂      

Easy Access to 1‐Amino and 1‐Carbon Substituted Isoquinolines via Cobalt‐Catalyzed C?H/N?O Bond Activation

A green atom‐economical method for the synthesis of highly functionalized 1‐amino and 1‐carbon substituted isoquinolines from the reaction of N′‐hydroxybenzimidamides and aryl ketoximes, respectively, with alkynes via pentamethylcyclopentadienylcobalt(III)‐catalyzed C H/N O bond activation is described. The external oxidant‐free annulation reaction uses the =NOH moiety in N′‐hydroxybenzimidamides or N‐aromatic ketone oximes as the directing group and internal oxidant. This first row transition metal‐catalyzed annulation serves as an efficient alternative for the synthesis of isoquinolines, as water is the only by‐product and expensive noble metals such as rhodium(III), iridium(III), palladium(II), and ruthenium(II) are not required. The reaction proceeds via C H activation, alkyne insertion, reductive elimination, and N O activation.

     

An Efficient,Stable and Reusable Palladium Nanocatalyst: Chemoselective Reduction of Aldehydes with Molecular Hydrogen in Water

Palladium nanoparticles (Pd‐BNP) stabilized by a binaphthyl‐backbone can be efficiently used for the chemoselective reduction of aldehydes in the presence of hydrogen at room temperature in water. The Pd‐BNP catalyst is easily recovered and reused for five catalytic cycles.