Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Hepatoblastoma in an adult associated with c-met proto-oncogene imbalance

A rare case of hepatoblastoma in a 61-year-old Japanese housewife is described. This liver tumor mainly consisted of two tissue components: embryonal hepatocytes and primitive mesenchymal tissue. Fetal hepatocytes with alpha-fetoprotein production, gland formation, cartilage and osteoid were also found in a small portion. Molecular analysis by slot blot method revealed increased copy numbers of c-met and K-sam proto-oncogenes and cyclin D1 genes. These findings suggest that alterations of these oncogenes might play a role in the development of adult hepatoblastoma.     

Pulmonary vascular disease and operative indications in complete atrioventricular canal defect in early infancy

Pulmonary vascular disease was morphometrically analyzed in 67 patients (mean age, 19 months) with isolated complete atrioventricular canal defect. Complete obstruction of the small pulmonary arterial lumen resulting from acute fibrous proliferation and atrophy of the peripheral arterial media, which were considered absolute operative contraindications, were characteristic in six patients with Down's syndrome. Morphometric analysis of medial thickness revealed that thinning of the media of the small pulmonary arteries is generally observed at around 6 months of age in patients with complete atrioventricular canal defect and that the media in patients who have complete atrioventricular canal defect and Down's syndrome was thinner than that in such patients without Down's syndrome. These results suggest that thinning of the media as a result of two factors--Down's syndrome and aging--facilitates the rapid occurrence of fibrous intimal proliferation. Therefore intracardiac repair is desirable within 6 months of life, before medial thinning, in patients with complete atrioventricular canal defect and Down's syndrome. Excluding patients with absolute operative contraindications, the scores of the index of pulmonary vascular disease in operative survivors were below 2.0 and death occurred when scores were more than 2.2. The pulmonary vascular resistances measured in room air and by the oxygen inhalation and tolazoline tests in patients with operative contraindications were more than 7.3, 3.8, and 6.6 units.m2, respectively. We thus conclude that lung biopsy should be undertaken for patients in whom pulmonary vascular resistance is beyond these values to determine the appropriateness of surgical intervention.     

Bounds of age replacement time

An age replacement policy with a planned replacement time t₀ is considered. Five approximations which give upper or lower bounds of an optimum time t₀¹ and are computed more easily than t₀¹ are derived. A numerical example shows, when the failure time has a Weibull distribution, that some approximations are fairly good.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

Synthesis of hydrous SnO2 and SnO2-coated TiO2 powders by the homogeneous precipitation method and their characterization

Hydrous SnO₂ and SnO₂-coated TiO₂ powders were synthesized by the homogeneous precipitation method using urea and the products were characterized by X-ray diffraction, thermogravimetry, differential thermal analysis, scanning electron microscopy and energy- dispersive X-ray microanalysis. Electrical conductivities were measured with an impedance analyser. Hydrous SnO₂ powder prepared under conditions without SO ₄ ^2– ions was a bulky product containing 75 wt% of water. The addition of SO ₄ ^2– ions to the solution changed bulky hydrous SnO₂ to a dense product; approximately spherical particles were obtained with an average particle size of 0.14 ± 0.03 m. with 13.5 wt % of absorbed water. Antimony-doped hydrous SnO₂ prepared under conditions with SO ₄ ^2– ions consisted of approximately spherical particles with an average particle size of 0.17 ± 0.04 m with 15.0 wt % of absorbed water. Hydrous SnO₂-coated TiO₂ powders with a good dispersion state and with various Sn/Ti ratios were prepared under conditions with SO ₄ ^2– ions. All the as-prepared coated powders were white, but the products doped with Sb³⁺ ions were turned to pale blue by heat treatment at 600° C for 1 h and their electrical conductivities increased by orders of about 3.0 in comparison with those of the other two.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials

A variety of metallic powder particles were thermally sprayed onto the mirror polished metallic substrate surface and the effect of both substrate temperature and ambient pressure on the flattening behavior of the particle was systematically investigated. In the flattening behavior of the sprayed particle onto the substrate surface, critical conditions were recognized both in the substrate temperature and ambient pressure. That is, the flattening behavior changed transitionally on that critical temperature and pressure range, respectively. A transition temperature, T _t, and transition pressure, P _t, were defined and introduced, respectively for those critical conditions. The fact that the dependence of both transition temperature and transition pressure on the sprayed particle material had similar tendency indicated that the wetting of the substrate by the molten particles seemed to be a domination in the flattening. Three-dimensional transition curvature by combining both transition temperature and transition pressure dependence was proposed as a practical and effective controlling principle of the thermal spray process. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

A superhydrophilic titanium implant functionalized by ozone gas modulates bone marrow cell and macrophage responses

Bone-forming cells and M? play key roles in bone tissue repair. In this study, we prepared a superhydrophilic titanium implant functionalized by ozone gas to modulate osteoconductivity and inhibit inflammatory response towards titanium implants. After 24 h of ozone gas treatment, the water contact angle of the titanium surface became zero. XPS analysis revealed that hydroxyl groups were greatly increased, but carbon contaminants were largely decreased 24 h after ozone gas functionalization. Also, ozone gas functionalization did not alter titanium surface topography. Superhydrophilic titanium (O₃–Ti) largely increased the aspect ratio, size and perimeter of cells when compared with untreated titanium (unTi). In addition, O₃–Ti facilitated rat bone marrow derived MSCs differentiation and mineralization evidenced by greater ALP activity and bone-like nodule formation. Interestingly, O₃–Ti did not affect RAW264.7 M? proliferation. However, naive RAW264.7 M? cultured on unTi produced a two-fold larger amount of TNFα than that on O₃–Ti. Furthermore, O₃–Ti greatly mitigated proinflammatory cytokine production, including TNFα and IL-6 from LSP-stimulated RAW264.7 M?. These results demonstrated that a superhydrophilic titanium prepared by simple ozone gas functionalization successfully increased MSCs proliferation and differentiation, and mitigated proinflammatory cytokine production from both naive and LPS-stimulated M?. This superhydrophilic surface would be useful as an endosseous implantable biomaterials and as a biomaterial for implantation into other tissues.     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.