Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Optimized Biocatalytic Synthesis of 2-Selenopyrimidine Nucleosides by Transglycosylation**

Selenium-modified nucleosides are powerful tools to study the structure and function of nucleic acids and their protein interactions. The widespread application of 2-selenopyrimidine nucleosides is currently limited by low yields in established synthetic routes. Herein, we describe the optimization of the synthesis of 2-Se-uridine and 2-Se-thymidine derivatives by thermostable nucleoside phosphorylases in transglycosylation reactions using natural uridine or thymidine as sugar donors. Reactions were performed at 60 or 80 °C and at pH 9 under hypoxic conditions to improve the solubility and stability of the 2-Se-nucleobases in aqueous media. To optimize the conversion, the reaction equilibria in analytical transglycosylation reactions were studied. The equilibrium constants of phosphorolysis of the 2-Se-pyrimidines were between 5 and 10, and therefore differ by an order of magnitude from the equilibrium constants of any other known case. Hence, the thermodynamic properties of the target nucleosides are inherently unfavorable, and this complicates their synthesis significantly. A tenfold excess of sugar donor was needed to achieve 40−48 % conversion to the target nucleoside. Scale-up of the optimized conditions provided four Se-containing nucleosides in 6–40 % isolated yield, which compares favorably to established chemical routes.     

AI paradigms

The aim of this paper is comparative analysis of most important AI paradigms. An AI paradigm is defined as the pair composed by a concept of intelligence and a methodology in which intelligent computer systems are developed and operated. Three paradigms, the behaviourist paradigm, the agent paradigm, and the artificial life paradigm are discussed.     

Dynamic light scattering and ultrasonic investigations during the cure reaction of an epoxy resin

Brillouin scattering (BS), photon correlation spectroscopy (PCS), and ultrasonic (US) measurements were conducted to study the curing process of diglycidyl ether of bisphenol A with butane-1,4-diol at a curing temperature of 100°C. The experimental techniques probe the primary glass-rubber transition during the curing reaction. The primary relaxation time τ obtained from the BS and US velocity and absorption increases with curing time and hence the BS experiment measures τ at earlier stages of cure than the US experiment. The relaxation times at a different extent of reaction and for different measuring temperatures are consistent with BS, US, PCS, and DSC measurements and conform to a single reduced Vogel–Fulcher–Hesse–Tamann equation. Furthermore, the US experiments show evidence of secondary relaxations in the epoxy system.     

Sustainability in Web server systems

The exponential growth of Internet during the last decade leads us to make more efforts in the researching and developing of sustainable Web servers in order to decrease the global energy demand. In this paper, we cover, as a first step, a proper review of the literature related to the energy efficiency research in Web server systems to depict the state of the art to plan further contributions as more research in sustainable Web systems. We also propose and implement an energy metric that permits to establish a relation between the Quality of Service (QoS) obtained by the system and the power it consumes.     

Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors

Corrosion kinetics of 99.6% aluminium covered by a thin spontaneously formed oxide film in hydrochloric acid solution with and without the presence of substituted N-aryl pyrroles was studied using electrochemical impedance spectroscopy and quasi steady-state polarization. Measurements were performed on a rotating disc electrode in an argon-deaerated solution in the temperature range 20 to 50°C. The addition of inhibitor considerably increases overvoltage of the cathodic process (HER) and shifts Ecorr to negative potential values. The activation energy of the hydrogen evolution reaction was Ea=50±5kJmol–1 and was not affected by the presence of inhibitor. The inhibitory action occurs by -bonding between the adsorbed inhibitor molecules and the electrode surface. The electrode coverage follows the Langmuir adsorption isotherm with an adsorption equilibrium constant K=1.1–2.64×105dm3mol–1. The adsorption of organic compound prevents the adsorption of chloride ions and slow down the rate of corrosion.     

Mass transfer in aerated fermentation broths in a stirred tank reactor

The volumetric mass transfer coefficients, k_La, measured in a pilot plant (0.1 m³) and an industrial (67.5 m³) fermentor during an actual fermentation process are presented. Problems related to the estimation of the phsyical properties as well as to the correlation of experimental data and to scale up procedures are discussed. Although the scale up factor was rather high, both sets of data could be represented by single correlation. Comparison of the experimental data with several available correlations demonstrated the need for pilot plant experiments and scale up procedures, since it is almost impossible to take into account all relevant system properties.