Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Antioxidant Activity of Rambutan (Nephelium lappaceum L.) Peel Extract in Soybean Oil during Storage and Deep Frying

Rambutan (Nephelium lappaceum L.) peel (RBP) is discarded as the main by‐product during processing of the fruit. Increasing attention is now paid to the valorization of RBP for the recovery of valuable compounds. Geraniin, ellagic acid, quercetin, and rutin are the main phenolic compounds found in methanolic RBP extract. Extracted rambutan peel powder (ERPP) is used to evaluate the oxidative stability of soybean oil stored at 4 and 30 °C in the dark and light and deep fried with potatoes at 160 °C. Tert‐butylhydroquinone (100 µg g^?1 oil, TBHQ) serves as positive control. Oil supplemented with ERPP of 1000 µg gallic acid equivalents (GAE) g^?1 of oil shows positive effects on the retardation of the oxidation process during storage in comparison with oil without addition. During deep frying, either ERPP (1000 µg GAE g^?1) or TBHQ retards the lipid oxidation of oil. Levels of thiobarbituric acid reactive substances of potatoes fried in oil fortified with the extract and TBHQ (0.4–0.59 µg g^?1) are much lower than those without the extract (1.31 ± 0.10 µg g^?1) (p < 0.05). Therefore, RBP extract exhibits favorable antioxidant effects and can be used for effectively inhibiting lipid oxidation in oil during storage and deep frying. Practical Applications: An extract from rambutan fruit peel containing phenolic compounds, that is, geraniin, ellagic acid, rutin, and quercetin showed promising results to be used as potential antioxidants in soybean oil during deep frying. Both oxidation of the frying oil as well as the oxidation of the food product, that is, potatoes were inhibited. These results demonstrated that rambutan fruit peel extract can be used as a natural antioxidant in frying oil to replace synthetic antioxidants, that is, TBHQ.     

The fatigue threshold, surface condition and fatigue limit of steel wire

To test the hypothesis that fatigue cracks in drawn, pearlitic steel wire propagate from pre-existing surface defects which can be treated as cracks, the fatigue limits of five different wires have been statistically determined. The fatigue thresholds were measured using a new AC potential drop method and the initial defect depths then calculated using the equation a_o=1π(ΔK_th/2σ_e)² and compared with observed values.

For higher strength steel wires (σ_u>1800 MPa) the agreement was very good; for the lower strength steel wire (σ_u=1469 MPa), however, the observed values were smaller than the calculated ones. The reasons for this discrepancy are discussed. A quantitative model is developed from the hypothesis and the influence of residual tensile stresses, decarburization and polishing on the fatigue limit of drawn steel wire is assessed.     

Thermal inactivation kinetics of alkaline phosphatase in equine milk

Alkaline phosphatase (ALP) is widely used as an indicator of proper pasteurization in bovine milk. Due to interest in the use of equine ALP as a time/temperature integrator (TTI) for evaluation of the efficacy of thermal processing of equine milk, its inactivation kinetics were evaluated in whole and skimmed equine milk. Experimentally determined decimal reduction times showed that equine ALP is more readily inactivated in equine milk than its bovine counterpart. Thus, considering the required 6 D reduction of pathogens and the rather low enzyme level present in equine milk, equine ALP will not be suitable as indicator for correct pasteurization of equine milk under the conditions currently used in the reference method for the determination of ALP in milk-based products.     

Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites

The high viscosity of thermoplastic matrices hampers fiber impregnation. This problem can be overcome by using low viscous polymeric precursors such as cyclic butylene terephthalate (CBT^® resins), which polymerize to form a thermoplastic matrix. This allows thermoset production techniques, like resin transfer molding (RTM), to be used for the production of textile reinforced thermoplastics. Due to the processing route and more specifically the time-temperature profile, inherent to the RTM process, the crystallites of the matrix consist out of well-defined, thick and well-oriented crystal lamellae. Together with a high overall degree of crystallinity and a low density of tie molecules, these large and perfect crystals cause polymer brittleness. Matrix brittleness lowers the transverse strength of unidirectional composites to below the matrix strength, but leaves the mechanical properties in the fiber direction unaffected. Although not a valid option for the RTM production route, crystallization from a truly random melt and at a sufficiently high cooling rate would substantially improve the ductility.     

Compression resistance and hysteresis of carbon fibre tows with grown carbon nanotubes/nanofibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. The issues for these materials related to manufacturing of these composites are, however, less investigated. Following the study of compressibility of woven carbon fibre preforms with CNT/CNFs grown on the fibres using the CVD method [Compos Sci Technol 2011; 71(3): 315-325], this paper describes compression tests on the carbon tows used in these fabrics. The results of the measurements include pressure vs. thickness diagrams in consecutive compression cycles and hysteresis of the compression. The results confirm a drastic change of compressibility of fibrous assemblies in the presence of CNT/CNF grafting.     

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on carbon fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. If these nano-engineered FRC (nFRC) are destined to leave laboratories and enter industrial-scale production, a question of adapting the existing composite manufacturing methods will arise. The paper studies compressibility of woven carbon fibre performs (two types of fabrics) with CNT/CNF grown on the fibres using the CVD method. The results include pressure vs thickness and pressure vs fibre volume fraction diagrams for one and four layers of the fabric. Morphology of the nFRC is studied with SEM. It is shown that the pressure needed to achieve the target fibre volume fraction of the preform increases drastically (for example, from 0.05 MPa to more than 0.5 MPa for a fibre volume fraction of 52%) when CNT/CNF are grown on it. No change in nesting of the fabric plies is noticed. The poor compressibility can lower the achievable fibre volume fraction in composite for economical vacuum assisted light-RTM techniques and increase the pressure requirements in autoclave processing.     

A model for the compression of a random assembly of carbon nanotubes

A model for calculation of the compression resistance of a random assembly of carbon nanotubes (CNTs) is proposed. The model is based on the theory of geometry and compression of fibrous materials with randomly oriented fibres. It accounts for the orientation distribution and volume fraction of CNTs in the assembly, the bending rigidity of a CNT and its decrease after onset of buckling and for friction and slippage between CNTs. The model also allows for calculation the number of contacts between CNTs in the assembly and of the percolation threshold. The predicted compression resistance is compared with experimental data on compression of “buckydisks” made of CNTs.