Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

Gelsolin is a downstream effector of rac for fibroblast motility

Rac, a member of the rho family of GTPases, when activated transmits signals leading to actin-based membrane ruffling in fibroblasts. Compared with wild-type fibroblasts, gelsolin null (Gsn-) dermal fibroblasts have a markedly reduced ruffling response to serum or EGF stimulation, which signal through rac. Bradykinin-induced filopodial formation, attributable to activation of cdc42, is similar in both cell types. Wild-type fibroblasts exhibit typical lamellipodial extension during translational locomotion, whereas Gsn- cells move 50% slower using structures resembling filopodia. Multiple Gsn- tissues as well as Gsn- fibroblasts overexpress rac, but not cdc42 or rho, 5-fold. Re-expression of gelsolin in Gsn- fibroblasts by stable transfection or adenovirus reverts the ruffling response, translational motility and rac expression to normal. Rac migrates to the cell membrane following EGF stimulation in both cell types. Gelsolin is an essential effector of rac-mediated actin dynamics, acting downstream of rac recruitment to the membrane.     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.     

Size exclusion behavior of polymers in amide solvents

Summary The size exclusion chromatography of neutral polymers and polymers containing ionic groups was investigated using N,N-dimethylacetamide (DMA) as mobile phase. As reported previously for N,N-dimethylformamide (DMF), acrylonitrile polymers containing charges, even those at terminal end groups, showed markedly small retention volumes and multimodal peaks by refractive index and 280 nm UV detectors. In DMA containing small amounts of LiBr the peaks of the ionic polymers were shifted to small retention volumes while neutral polymers with analogous chemical structures did not show the same behavior. As in the case of DMF the peculiarities observed in DMA were attributed to the formation of supramolecular structures by the interaction of the ionic groups in the polymer and the ionic species from DMA decomposition.     

Continual conversion of free fatty acid in rice bran oil to triacylglycerol by immobilized lipase

Rice bran oil containing 30–50% free fatty acid was continually converted to an oil containing more than 75% of triacylglycerol (TG) by means of immobilized lipase. The reaction was carried out at 60°C for 24 h with dehydration and reactant mixing by dry nitrogen flow under a positive nitrogen atmosphere. Enzymatic TG synthesis with evaporation by heating was not suitable because of the increasing peroxide value of the oil. Part of this article was presented at the annual meeting of the Japan Oil Chemists' Society at Sendai, Japan, October, 16, 1990.     

Indirect augmented reality

Developing augmented reality (AR) applications for mobile devices and outdoor environments has historically required a number of technical trade-offs related to tracking. One approach is to rely on computer vision which provides very accurate tracking, but can be brittle, and limits the generality of the application. Another approach is to rely on sensor-based tracking which enables widespread use, but at the cost of generally poor tracking performance. In this paper we present and evaluate a new approach, which we call Indirect AR, that enables perfect alignment of virtual content in a much greater number of application scenarios.To achieve this improved performance we replace the live camera view used in video see through AR with a previously captured panoramic image. By doing this we improve the perceived quality of the tracking while still maintaining a similar overall experience. There are some limitations of this technique, however, related to the use of panoramas. We evaluate these boundaries conditions on both a performance and experiential basis through two user studies. The result of these studies indicates that users preferred Indirect AR over traditional AR in most conditions, and when conditions do degrade to the point the experience changes, Indirect AR can still be a very useful tool in many outdoor application scenarios.     

Unravel four hairpins!

DNA machines consisting of consecutive hairpins, which we have previously described, have various potential applications in DNA computation. In the present study, a 288-base DNA machine containing four consecutive hairpins was successfully constructed by ligation and PCR. PAGE and fluorescence spectroscopy experiments verified that all four hairpins were successfully opened by four opener oligomers, and that hairpin opening was dependent on the proper openers added in the correct order. Quantitative analysis of the final results by fluorescence spectroscopy indicated that all four hairpins were open in about 1/4 to 1/3 of the DNA machines.     

A Face Identification System Based on the Mahalanobis–Taguchi System

In this paper, we propose a face identification system based on the Mahalanobis–Taguchi System (MTS). The MTS is one of the pattern recognition methods frequently used in quality engineering, and can perform robust pattern recognition by using training data, including noise. It is likely that this advantage will allow the effective implementation of a robust face identification system against lighting and face position fluctuations. Moreover, the MTS can optimize the number of attributes required for identification by using the orthogonal array and the signal/noise (SN) ratio. The face identification system has to deal with many users and the amount of data in a facial image is large. Therefore, the time required for identification can be decreased and the amount of data in the facial image database can be reduced by performing the optimization. We confirmed the effectiveness of the proposed system through practical experiments. The experimental results revealed that the MTS was an effective method for robust face identification, and could effectively reduce the number of attributes required for identification.