Non-contact methods of measuring moisture concentration in external layers of building partitions: III—Water vapour condensation on the cementitious surfaces

This paper presents the results of the larger study into a potential application of laser radiation for the detection of phase transition processes in low temperatures occurring on the surface layers of cementitious materials. An attempt was made to identify relationships between the environmental conditions—temperature and air humidity, and the selected parameters of the reflected light. Onset of the condensation process and formation of water microdrops on the surface of the material leads to the phase displacement of individual laser rays, which are represented by different speckle images.

Although the analysis of parameters of the reflected light are very difficult in the case of porous materials because of highly developed roughness of the surface structure it has been proved that a dynamic study of the phase transition phenomena can be successfully carried out without mechanical intervention.     

Non-contact methods of measuring moisture concentration in external layers of building partitions II—Monitoring of the water vapour condensation on porous surfaces

This paper present the results of the investigation into a potential application of laser radiation for the detection of phase transition processes occurring on the surface layers of porous materials. An attempt was made to discuss in the approximation equations, the relationships between coefficients of the reflected light, the temperature and humidity of the surrounding environment. Laser light reflected from the porous surface carries information about the roughness of the structure. The presence of water microdrop on the surface of the porous material, as a result of condensation and thus a phase transition, leads to the phase displacement of individual rays, which is represented by different images. Therefore, a comprehensive analysis of the reflected light parameters allows a dynamic study of the phase transition phenomena without mechanical intervention.     

Relationships between the structure of nitrodiphenylamine derived monoazo acid dyes and their spectroscopic and fastness properties

Fourteen monoazo acid dyes derived from 4-nitrodiphenylamine and 2-nitrodiphenylamine have been synthesized. Relationships between the position of nitro and sulphonic groups and the wavelength of the visible absorption band and also the lightfastness on polyamide fibres have been examined. It is suggested that the colour of the dyes and their lightfastness depend on the possibility of formation of intramolecular hydrogen bonding. The existence of such bonding was shown by the IR and UV-vis spectra of the investigated dyes and model derivatives of diphenylamine.     

Simple method for estimation of volatile carbonyl compounds in edible oils and fried potato chips

A simple and sensitive method has been devised to determine the amounts of volatile carbonyl compounds in vegetable oils and fried potato chips, using a chemical reaction trap and absorption spectrophotometry. A sample of oil or fried potato chips is heated and simultaneously purged with a flow of nitrogen gas which further bubbles through a tube (trap) containing a hydroxylamine hydrochloride solution. The volatile carbonyl compounds are removed from the sample with the purge gas and retained in the trapping solution as they react to form the less volatile oxime derivatives. These are subsequently estimated by ultraviolet absorption, at wavelength 212 nm for the total oximes and at 272 nm specifically for conjugated diene carbonyl oximes, including furfural if present. Volatile carbonyls can be determined by this method at levels as low as 0.1–0.5 ppm of the sample. The method has been applied to the analysis of samples of canola (low erucic acid rapeseed) oil, cottonseed oil, and potato chips, all before and after storage. The method should be suitable also for other types of fried food.     

Phase transitions of canola oil sediment

Canola sediment was obtained from an industrial filter cake by solvent extraction. When heated in the differential scanning calorimeter (DSC) (5–100°C), the sediment exhibited a single narrow melting peak at around 74.8°C. No solid-state polymorphic transformation of the material could be detected over this temperature range. The X-ray powder diffraction pattern of canola sediment resembled waxes from other sources with an orthorhombic unit cell. The phase transition behavior of canola sediment in oil was studied by both DSC and polarizing microscopy. With increasing ratio of oil/sediment, a reduction in both melting temperature and transition enthalpy was observed. The shape of the supercooling curve resembled that of the melting curve. The induction time was determined by spectrophotometry and was used to calculate the interfacial free energyσ between sediment and oil; σ=4.71 erg/cm². The effect of temperature and sediment concentration on the clouding time of canola oil was studied; the clouding time was the shortest at 5°C.     

TSV constraints related to temperature excursion, pressure during molding, materials used and handling loads

The current paper focuses on several mechanical aspects of a waferlevel packaging approach using a direct face-to-face Chip-to-Wafer (C2W) bonding of a MEMS device on an ASIC substrate wafer. Requirements of minimized inherent stress from packaging and good decoupling from forces applied in manufacturing and application are discussed with particular attention to the presence of through-silicon vias (TSV) in the substrate wafer. The paper deals with FEM analysis of temperature excursion, pressure during molding, materials used and handling load influence on mechanical stress within the TSV system and on wafer level, which can be large enough to disintegrate the system.     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

The Effect of Implanted Al and/or Y on the Scale Formation on Low-Al Fe20Cr2Al Alloy

The very early stages of the oxidation of an Fe20Cr2Al alloy, unmodified and ion-implanted by aluminium, yttrium and a combination of both elements, Al and Y, were studied at 1100 °C in oxygen using two-stage-oxidation exposures with ¹⁸O₂ as a tracer and subsequent characterisation of the scales using SIMS analyses of distribution of oxygen isotopes and oxide-related negative ion clusters, SEM observations of the surface morphology and photoluminescence spectroscopy analysis of the phase composition. The scales formed in all cases, except for the Al-implanted alloy, exhibited layered structures, with the outer part comprising Fe- and Cr-rich oxide, and the inner part being Al₂O₃, which grew due to a mixed outward–inward mechanism . The alumina sub-layers contained the transient oxides and α-Al₂O₃. Implanted Al significantly affected the mechanism of the scale growth, providing that the scale consisted essentially of α-Al₂O₃, and grew via a mixed inward-outward mechanism typical for scales on alumina formers.     

Motivational,emotional, and behavioral correlates of fear of missing out

Social media utilities have made it easier than ever to know about the range of online or offline social activities one could be engaging. On the upside, these social resources provide a multitude of opportunities for interaction; on the downside, they often broadcast more options than can be pursued, given practical restrictions and limited time. This dual nature of social media has driven popular interest in the concept of Fear of Missing Out – popularly referred to as FoMO. Defined as a pervasive apprehension that others might be having rewarding experiences from which one is absent, FoMO is characterized by the desire to stay continually connected with what others are doing. The present research presents three studies conducted to advance an empirically based understanding of the fear of missing out phenomenon. The first study collected a diverse international sample of participants in order to create a robust individual differences measure of FoMO, the Fear of Missing Out scale (FoMOs); this study is the first to operationalize the construct. Study 2 recruited a nationally representative cohort to investigate how demographic, motivational and well-being factors relate to FoMO. Study 3 examined the behavioral and emotional correlates of fear of missing out in a sample of young adults. Implications of the FoMOs measure and for the future study of FoMO are discussed.