Biotransformation of three aromadendrane‐type sesquiterpenoids by Aspergillus wentii

BACKGROUND: The biotransformation of sesquiterpenoids, which are a large class of naturally occurring compounds, using microorganisms as a biocatalyst to produce useful novel organic compounds was investigated. The biotransformation of sesquiterpenoids, (+)‐aromadendrene ( 1 ), (−)‐alloaromadendrene ( 2 ) and (+)‐ledene ( 3 ) has been investigated using Aspergillus wentii as a biocatalyst. Results: Compound 1 was converted to (−)‐(10S,11S)‐10,13,14‐trihydroxyaromadendrane ( 4 ). Compound 2 was converted to (+)‐(1S,11S)‐1,13‐dihydroxyaromadendrene ( 5 ) and (−)‐5,11‐epoxycadin‐1(10)‐en‐14‐ol ( 6 ). Compound 3 was converted to compound 6 , (+)‐(10R,11S)‐10,13‐dihydroxyaromadendr‐1‐ene ( 7 ) and (+)‐(10S,11S)‐10,13‐dihydroxyaromadendr‐1‐ene ( 8 ). The structure of the metabolic products has been elucidated on the basis of their spectral data. CONCLUSION: Compound 1 gave only one product that was hydroxylated at C‐10, C‐13 and C‐14. By contrast, compounds 2 and 3 gave a number of products, one of which was common. The differences in oxidation of 1–3 are due to the configuration of the C‐1 position. Compounds 4–8 were new compounds. Copyright © 2008 Society of Chemical Industry     

Enhanced hot-carrier-degradation in LDD MOSFET's under pulsedstress

Hot-carrier degradation of lightly doped drain (LDD) MOSFET's under ac stress is investigated. Enhanced ac degradation occurs in LDD MOSFET's as well as in single-drain MOSFET's. However, there is a peculiar degradation mechanism in LDD MOSFET's. For single-drain MOSFET's, enhanced ac degradation appears in both threshold voltage and transconductance at stress drain voltages larger than a critical value. On the other hand, for LDD MOSFET's, although the enhanced degradation in threshold voltage and transconductance appears at stress drain voltages larger than a critical value, the enhanced degradation in transconductance appears even under stress drain voltages lower than the critical value. The difference in the ac-enhanced degradation between LDD and single-drain structures can be explained by a hot hole generated neutral-electron-trap model and the change in hot-hole-injected oxide region according to stress bias conditions     

An Electron Spin Resonance Study of Evolution of Organic Free Radicals in Irradiated Pepper During Heat Treatment

ABSTRACT: The thermal evolution behavior of the organic free radicals induced in irradiated black pepper was studied by electron spin resonance spectroscopy. To analyze the time-dependent evolution process, we used the theory of transient phenomena, that is, an ordinal differential equation, as well as the nonlinear least squares numerical method. We found that the radical evolution that occurred in the irradiated pepper obeys a single exponential function and yields a unique time constant. The evolution of the organic free radical undergoes a simple reaction process of a single radical species.     

Cisplatin plus oral etoposide in the treatment of patients with advanced small cell lung cancer. Japan Clinical Oncology Group

BACKGROUND: Etoposide is a highly schedule-dependent drug. We investigated combination chemotherapy of oral etoposide and intravenous cisplatin for small cell lung cancer (SCLC). METHODS: Fifty-seven patients with SCLC with extensive disease (ED) or limited disease (LD) with pleural effusion registered in the 21 institutions of the Japan Clinical Oncology Group were treated with oral etoposide 40 mg/m2/d for 21 days and cisplatin 80 mg/m2 on day 1 of every 28-period day. The entry period was between February 1992 and August 1995. The actual percentages of patients treated with etoposide were 93.6, 89.5, 92.3 and 96.9% in the first, second, third and fourth cycles, respectively. RESULTS: Nine patients (15.8%) achieved a complete response resulting in an overall response rate of 82.5% (95% confidence interval, 70.1-91.3%). Leukopenia and thrombocytopenia of grade 3 or 4 were observed in 36 (49.1%) and 8 (14.0%) patients, respectively. Anemia of grade 3 or 4 occurred in 28 (49.1%) patients. Nausea, vomiting, anorexia and alopecia were common adverse events. One patient died of hemoptysis due to grade 4 thrombocytopenia. The mean survival time was 47.0 weeks. CONCLUSIONS: This dose and schedule of administration of etoposide in combination with cisplatin are considered to be clinically active. However, prolonged gastrointestinal toxicity of oral etoposide was a problem in comparison with the standard etoposide platinum regimen given by intravenous administration.     

An Application of Silica‐Based Monolithic Membrane Emulsification Technique for Easy and Efficient Preparation of Uniformly Sized Polymer Particles

Summary: Uniformly sized polymer particles were prepared by an emulsification and polymerization technique utilizing a silica monolithic membrane, namely the “silica monolithic membrane emulsification technique”. In this paper, we utilized silica monolithic membrane as a device for the preparation of uniformly sized polymer particles. A mixture of monomers, diluents and oil‐soluble initiator was emulsified into a continuous medium through the silica monolithic membrane and polymerized. The particles obtained had a higher size uniformity than that of particles prepared by previously reported membrane emulsification techniques, such as the Shirasu Porous Glass (SPG) emulsification technique. Through the silica monolithic membrane emulsification technique, we could prepare particles having availability as a possible packing material for solid‐phase extraction (SPE) and high performance liquid chromatography (HPLC).

SEM photograph of silica particles prepared through capillary plate membrane.     

Effect of tacticity of poly(methyl methacrylate) on interfacial region with silica in polymer nanocomposite

The effect of tacticity on the interfacial region between poly(methyl methacrylate) (PMMA) and silica in a PMMA/silica nanocomposite was investigated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The glass transition temperature (T_g) values of the syndiotactic (st-) and atactic (at-) PMMA/silica nanocomposites are higher than those of the neat PMMA. Conversely, the T_g of the isotactic (it-) PMMA/silica nanocomposite is slightly higher than that of the neat it-PMMA. DSC and XRD results suggest that the restriction of the PMMA chain mobility in the silica nanoparticle interfacial region heightens as the syndiotactic content increases. FT-IR results show that this phenomenon is caused by the interaction between the carbonyl group of PMMA and the silanol group on the silicon dioxide surface. Therefore, it can be concluded that the syndiotactic-rich PMMA has a significantly different molecular mobility from that of the neat PMMA in the interfacial region with silica nanoparticle surface than isotactic-rich PMMA.     

Emergency response to the nuclear accident at the Fukushima Daiichi Nuclear Power Plants using mobile rescue robots

On March 11, 2011, a massive earthquake (magnitude 9.0) and accompanying tsunami hit the Tohoku region of eastern Japan. Since then, the Fukushima Daiichi Nuclear Power Plants have been facing a crisis due to the loss of all power that resulted from the meltdown accidents. Three buildings housing nuclear reactors were seriously damaged from hydrogen explosions, and, in one building, the nuclear reactions became out of control. It was too dangerous for humans to enter the buildings to inspect the damage because radioactive materials were also being released. In response to this crisis, it was decided that mobile rescue robots would be used to carry out surveillance missions. The mobile rescue robots needed could not be delivered to the Tokyo Electric Power Company (TEPCO) until various technical issues were resolved. Those issues involved hardware reliability, communication functions, and the ability of the robots' electronic components to withstand radiation. Additional sensors and functionality that would enable the robots to respond effectively to the crisis were also needed. Available robots were therefore retrofitted for the disaster reponse missions. First, the radiation tolerance of the electronic componenets was checked by means of gamma ray irradiation tests, which were conducted using the facilities of the Japan Atomic Energy Agency (JAEA). The commercial electronic devices used in the original robot systems operated long enough (more than 100 h at a 10% safety margin) in the assumed environment (100 mGy/h). Next, the usability of wireless communication in the target environment was assessed. Such tests were not possible in the target environment itself, so they were performed at the Hamaoka Daiichi Nuclear Power Plants, which are similar to the target environment. As previously predicted, the test results indicated that robust wireless communication would not be possible in the reactor buildings. It was therefore determined that a wired communication device would need to be installed. After TEPCO's official urgent mission proposal was received, the team mounted additional devices to facilitate the installation of a water gauge in the basement of the reactor buildings to determine flooding levels. While these preparations were taking place, prospective robot operators from TEPCO trained in a laboratory environment. Finally, one of the robots was delivered to the Fukushima Daiichi Nuclear Power Plants on June 20, 2011, where it performed a number of important missions inside the buildings. In this paper, the requirements for the exploration mission in the Fukushima Daiichi Nuclear Power Plants are presented, the implementation is discussed, and the results of the mission are reported.     

A new approach to the design of high-Tc superconductors: Metallised interlayers

We show from muon spin relaxation (SR) studies on mercury HTS superconductors that a 50-fold increase in irreversibility field obtained by partial substitution of Re for Hg is due to metallisation of the Hg/Re layer. Induced superconductivity on this metallic layer doubles the overall superfluid density. This suggests a new approach to the design of high performance HTS materials: metallising one of the non-CuO₂ interlayers and thereby greatly enhancing the superconducting properties.     

A three-dimensional shape memory alloy microelectrode with clippingstructure for insect neural recording

A microelectrode, with clipping structure for neural recording from a free-moving insect, was designed and fabricated using a shape memory alloy (SMA) thin film. The SMA thin films (titanium nickel; Ti-48 at.%Ni) are deposited by RF magnetron sputtering and patterned by HF-HNO ₃ wet etching. The transformation temperatures of the SMA thin films were measured at 54°C (A*) and 50°C (M*). The SMA microelectrode consists of a “hook” structure (720 μm×480 μm) and two “C”-shape probes (600 μm×70 μm). The electrode impedance is about 5 kΩ at 1 kHz. The desired three-dimensional (3D) shape is given to the electrode by a bonded wire. The clinging force of the electrode to the nerve is enhanced by the 3-D structures. The SMA microelectrode can clip a nerve cord tightly. The damages of the nerve by thermal actuation of the clip are not observed by physiological analysis. The neural activity from a living insect was successfully recorded with this SMA microelectrode