Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

Performance of compression/absorption hybrid refrigeration cycle with propane/mineral oil combination

This paper discusses the feasibility of a vapor compression/absorption hybrid refrigeration cycle for energy saving and utilization of waste heat. The cycle employs propane as a natural refrigerant and a refrigeration oil as an absorbent. A prototype of the cycle is constructed, in which a compressor and an absorption unit are combined in series. The performance of the cycle is examined both theoretically and experimentally. Although the solubility of the propane with the oil is not enough as a working pair in the absorption unit, the theoretical calculation shows that the hybrid cycle has a potential to achieve a higher performance in comparison with a simple vapor compression cycle by using the waste heat. In the experiment, the prototype cycle is operated successfully and it is found that an improvement of an absorber is necessary to achieve the good performance close to the theoretical one. The application of an AHE (absorber heat exchanger) can reduce the heat input to a generator. Further examinations on some other combinations of refrigerant/refrigeration oil and additives are desirable.     

Veno-right ventricular extracorporeal membrane oxygenation for thoracic surgery: an experimental study in dogs

Different photoactivatable derivatives of toxin 3 (CTX) Naja naja siamensis were obtained after CTX reaction with N-hydroxysuccinimide esters of p-azidobenzoic, p-azidotetraflourobenzoic, p-benzoylbenzoic and p-[3-(trifluoromethyl)-3H-diazirin-3-yl]benzoic acids. The ion-exchange HPLC profiles for the reaction products were very similar in four cases, with one predominant peak corresponding to the derivative containing the label at Lys23. After [125I]iodination, CTX photoactivatable derivatives were cross-linked to the nicotinic acetylcholine receptor from Torpedo californica under optimized conditions. The highest cross-linking yield (up to 16% of the bound toxin) was observed for azidobenzoyl-Lys23-CTX. Different receptor subunits were found to be labelled depending on the nature of the photoactivatable group: the azido derivatives labelled the gamma and delta subunits, benzoylbenzoyl derivative labelled the alpha and delta subunits, while p-[3-(trifluoromethyl)-3H-diazirin-3-yl]benzoyl derivative reacted with alpha, gamma and delta subunits. The cross-linking experiments in the presence of varying concentrations of (+)-tubocurarine demonstrated that the Lys23-attached diazirinyl group contacts the delta and alpha subunits in one ligand-binding site, whereas at the other site, for another CTX molecule, the contacts of the Lys23-diazirinyl are with gamma and alpha subunits. This means that the central loop in the two CTX molecules binds at the alpha/gamma and alpha/delta interfaces. Calculation of the sterically possible displacement of diazirinyl nitrogen, basing on the known X-ray structure of CTX, showed that this value does not exceed 13 A. The results obtained favor the disposition of the ligand-binding sites at the subunit interfaces, with the distance between alpha and delta, or alpha and gamma subunits at these sites being not more than 13 A.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size

An Al-3% Mg solid solution alloy was subjected to intense plastic deformation, using either equal-channel angular (ECA) pressing or torsion straining, to produce grain sizes in the submicrometer range. Static annealing at elevated temperatures led to grain growth and average grain sizes of up to > 100 μm. As-fabricated and statically annealed specimens were used to determine the variation in microhardness with grain size, and results confirm that the Hall-Petch relationship persists down to at least the finest grain size examined experimentally (∼90 nm). The results provide no evidence to support the claims of a negative Hall-Petch slope when the average grain size is very small, but there is evidence of a decrease in the slope of the Hall-Petch plot at the very finest grain sizes (< 150 nm); this is attributed to the increased participation of mobile extrinsic dislocations in the boundary regions when taking the hardness measurements.     

Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

Peroxiredoxin 2 as a chemotherapy responsiveness biomarker candidate in osteosarcoma revealed by proteomics

Purpose : We aimed to identify novel chemotherapy responsiveness biomarkers for osteosarcoma (OS) by investigating the global protein expression profile of 12 biopsy samples from OS patients. Experimental design : Six patients were classified as good responders and six as poor responders, according to the Huvos grading system. The protein expression profiles obtained by 2‐D DIGE consisted of 2250 protein spots. Results : Among them, we identified 55 protein spots whose intensity was significantly different (Bonferroni adjusted p‐value<0.01) between the two patient groups. Mass spectrometric protein identification demonstrated that the 55 spots corresponded to 38 distinct gene products including peroxiredoxin 2 (PRDX 2). Use of a specific antibody against PRDX 2 confirmed the differential expression of PRDX 2 between good and poor responders, while PRDX 2 levels as measured by Western blotting correlated highly with their corresponding 2‐D DIGE values. The predictive value of PRDX 2 expression was further confirmed by examining an additional four OS cases using Western blotting. Conclusions and clinical relevance : These results establish PRDX 2 as a candidate for chemotherapy responsiveness marker in OS. Measuring PRDX 2 in biopsy samples before treatment may contribute to more effective management of OS.