A 3D contact smoothing method using Gregory patches

In this work, a method is developed for smoothing three‐dimensional contact surfaces. The method can be applied to both regular and irregular meshes. The algorithm employs Gregory patches to interpolate finite element nodes and provide tangent plane continuity between adjacent patches. The resulting surface interpolation is used to calculate gaps and contact forces, in a variationally consistent way, such that contact forces due to normal and frictional contact vary smoothly as slave nodes transition from one patch to the next. This eliminates the ‘chatter’ which typically occurs in a standard contact algorithm when a slave node is situated near a master facet edge. The elimination of this chatter provides a significant improvement in convergence behaviour, which is illustrated by a number of numerical examples. Furthermore, smoothed surfaces also provide a more accurate representation of the actual surface, such that resulting stresses and forces can be more accurately computed with coarse meshes in many problems. This fact is also demonstrated by the numerical examples. Published in 2002 by John Wiley & Sons, Ltd.     

In vivo nitrate tolerance is not associated with reduced bioconversion of nitroglycerin to nitric oxide

BACKGROUND: In vitro data suggest that reduced bioconversion of nitroglycerin (NTG) to nitric oxide (NO) contributes to the development of vascular and hemodynamic tolerance to NTG. We examined the in vivo validity of this hypothesis by measuring NTG-derived NO formation by in vivo spin-trapping of NO in vascular tissues from nitrate-tolerant and -nontolerant rats. METHODS AND RESULTS: Five groups (n = 6 to 8 each) of conscious chronically catheterized rats received NTG (0.2 or 1 mg/h IV) for 72 hours (nitrate-tolerant groups). Four other groups received either NTG vehicle (placebo, for 72 hours) or were left untreated (control). Nitrate tolerance was substantiated by a reduced (55% to 85%) hypotensive response to NTG in vivo and a reduced relaxation to NTG in isolated aortic rings. NTG-derived NO formation in aorta, vena cava, heart, and liver was measured as NOFe(DETC)2 and NO-heme complexes formed in vivo during 35 minutes combined with ex vivo cryogenic electron spin resonance spectroscopy. NO formation was significantly (P < .05) increased in all tissues in nitrate-tolerant rats in an NTG dose-dependent manner. Furthermore, the amount of NO formed from a bolus dose of NTG (6.5 mg/kg over 20 minutes) was similar in nitrate-tolerant and -nontolerant rats. CONCLUSIONS: The results suggest that vascular and hemodynamic NTG tolerance occurs despite high and similar rates of NO formation by NTG in tolerant and nontolerant target tissues. This finding is compatible with the assumption that reduced biological activity of NO, rather than reduced bioconversion of NTG to NO, contributes to in vivo development of nitrate tolerance.     

Allergic rhinoconjunctivitis treated with intramuscular injection of glucocorticoid

Effects and side effects of injectable depot steroid in the treatment of allergic rhinoconjunctivitis (hay fever) are described. A few controlled studies have shown injectable steroids to be superior to the effect of placebo and locally applied steroid. Over a period of 10 years from 1984-95 only 26 registered side effects were reported to the central Danish register for side effects of drugs (Laegemiddelstyrelsens Bivirkningsregister). Only eight concerned subcutaneous atrophy and in two cases the cutaneous changes persisted. Based on registration of number of treatments in the county of Funen 1996, it is estimated that the use of injectable depot steroids for treatment of hay fever accounts for about 535,000 DDD (defined daily doses corresponding to about 33,000 treatments per year). We conclude that the use of injectable corticosteroids in the treatment of hay fever is common and effective and side effects are very rare. However, injectable corticosteroids should only be used when conventional treatment is not sufficient to control symptoms.     

Automated image analysis of Euglena gracilis Klebs (Euglenophyta) for measuring sublethal effects of three model contaminants

The short-term impacts of atrazine (herbicide), tributyltin (organometal) and copper on the behaviour of Euglena gracilis Klebs (Euglenophyta) were assessed. First, the ECOTOX automated image analysis system was used, which measured swimming velocity, cell shape, percentage of cells swimming upwards, and randomness of swimming. Next, visual observation by microscopy was used to measure percentage of cell motility and cell shape. Behavioural changes can be used as an indicator of stress in less than 24 h, potentially making them suitable for inclusion in early-warning systems for water quality. Findings indicate that E. gracilis is a very sensitive organism to copper, showing inhibition of motility with visual observation at 0.8 μmol/L within 1 h. The image analysis system was in general less sensitive than visual observation for detecting behavioural changes after incubation in copper. In contrast, after exposure to organic contaminants atrazine and tributyltin, the ECOTOX system detected small changes in the number of cells swimming upwards (antigravitactic behaviour) at higher concentrations.     

Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

A methodology for fabrication of thermomechanically activated switchable surface wettability

In this study a platform is laid out for the creation of a multitiered surface exhibiting switchable wettability. This is done through a combination of both an acrylate‐based polymer understructure photopolymerized into a pillared array, and selectively placed surface treatments on these pillars. The acrylate‐based polymer is created through a systematic study and is shown to exhibit drastic alterations in material stiffness over a 19 °C temperature transition under aqueous conditions, allowing for stiff, erect pillars in the low temperature state, and pliable pillars that can easily be bent in the high temperature state. The glass transition temperature and onset temperature for the polymer system is found to be 49 and 30 °C, respectively. Three different surface treatments, including trichloro(1H,1H,2H,2H‐perfluorooctyl)silane, polydimethylsiloxane, and polydopamine, are investigated using static contact angle studies, and are selectively deposited onto the pillared surface such that a hydrophobic surface is exposed with the pillars erect, and a hydrophilic surface is exposed with the pillars in the bent state. The surface is shown to transition between first a hydrophobic, then hydrophilic state and return to a hydrophobic state when the investigations are coupled together forming a hierarchical surface structure. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44122.     

Significant histamine formation in tuna (Thunnus albacares) at 2 degrees C--effect of vacuum- and modified atmosphere-packaging on psychrotolerant bacteria

Occurrence and importance of psychrotolerant histamine producing bacteria in chilled fresh tuna were demonstrated in the present study. The objective was to evaluate microbial formation of histamine and biogenic amines in chilled fresh tuna from the Indian Ocean and stored either vacuum-packed (VP) or modified atmosphere-packed (MAP). Firstly, biogenic amines and the dominating microbiota were determined in VP tuna involved in an outbreak of histamine fish poisoning in Denmark. Secondly, the microbiota of fresh MAP tuna was evaluated at the time of processing in Sri Lanka and chemical, microbial and sensory changes were evaluated during storage at 1-3 degrees C. To explain the results obtained with naturally contaminated tuna the effect of VP and MAP on biogenic amine formation by psychrotolerant bacteria was evaluated in challenge tests at 2 degrees C and 10 degrees C. The VP tuna that caused histamine fish poisoning had a histamine concentration of >7000 mg/kg and this high concentration was most likely produced by psychrotolerant Morganella morganii-like bacteria or by Photobacterium phosphoreum. Similar psychrotolerant M. morganii-like bacteria dominated the spoilage microbiota of fresh MAP tuna with 60% CO2/40% N2 and formed >5000 mg/kg of histamine after 24 days at 1.7 degrees C. These psychrotolerant bacteria were biochemically similar to M. morganii subsp. morganii and their 16S rDNA (1495 bp) showed >98% sequence similarity to the type strain of this species. Toxic concentrations of histamine were produced at 2.1 degrees C in inoculated VP tuna by both the psychrotolerant M. morganii-like bacteria (7400+/-1050 mg/kg) and P. phosphoreum (4250+/-2050 mg/kg). Interestingly, MAP with 40% CO2/60% O2, in challenge tests, had a strong inhibitory effect on growth and histamine formation by both the psychrotolerant M. morganii-like bacteria and P. phosphoreum. In agreement with this, no formation of histamine was found in naturally contaminated fresh MAP tuna with 40% CO2/60% O2 during 28 days of storage at 1.0 degrees C. To reduce current problems with histamine fish poisoning due to VP tuna it is suggested, for lean tuna loins, to replace vacuum packaging with MAP containing approximately 40% CO2 and approximately 60% O2.     

WSA-DC——下一代高浓度高转化率WSA工艺

介绍了托普索公司新开发的WSA-DC工艺,详述其流程、优点、性能、消耗和生产数据.WSA-DC工艺是一个两次冷凝工艺,它结合了WSA工艺与两转两吸工艺的优点,通过对中间冷凝器的设计改进和仔细控制气体中的H2O/SO2比率,可以用ψ(SO2)等于或高于13%的原料气生产w(H2SO4)为99%的硫酸.以1套540t/d硫磺制酸装置为例,对WSA-DC工艺和传统干法两转两吸工艺进行了技术经济比较.