Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.     

Semiconductor photonic functional devices

Recent advances in semiconductor photonic functional devices based on the nonlinearities of laser diodes (LDs) are reviewed. Because the current research is driven primarily by the needs of optical fiber communications systems, most devices are made of InGaAsP and operate at wavelengths of between 1.3 and 1.55 μm, the wavelength window in which optical fibers have their most favorable properties. Minimum loss is at 1.55 μm, and zero dispersion is at 1.3 μm. AlGaAs devices operating at around 0.85 μm have also been reported. Two types of optical bistability-absorptive and dispersive-are explained, and devices based on them are described. Switching characteristics of bistable devices are discussed. Tunable wavelength converters and filters are also examined. Applications to all-optical communication and to optical switching systems are considered. Directions for future development are indicated     

Head-to-head polymers: 33. Bromination of cis-1,4-polybutadiene to head-to-head poly(vinyl bromide)

Cis-1,4-polybutadiene (PB) in a 0.5% solution of a solvent mixture of dichloromethane and 1,2-dibromoethane or tetrahydrofuran was quantitatively brominated with elemental bromine at 0°C under careful exclusion of oxygen to head-to-head poly(vinyl bromide). Partially brominated PB has a structure of random or block sequences of butadiene units in the polymer depending on the bromination solvent but shows no stereospecificity in the CHBrCHBr-dyads. Partially brominated PB with block structure showed a microphase-separated morphology over a wide range of composition. Microphase separation is less pronounced for the more random structure of butadiene units. I.r and ¹³C n.m.r. spectroscopy of the partially brominated PB was used to follow the progress of the bromination.     

Structural features of inclusion complexes of γ-cyclodextrin with various polymers

The crystalline structures of inclusion complexes of γ-cyclodextrin (γ-CD) with poly(ethylene glycol), poly(ethylene adipate), poly(propylene glycol) and poly(isobutylene) were studied by electron microscopy, in combination with X-ray diffraction works and measurements of thermal properties by DSC and TGA. The crystalline structure of as-prepared complexes was tetragonal and its cell dimensions were a = b = 2.380 nm and c = 1.48 nm. When an as-prepared sample was dried in a vacuum at room temperature, the tetragonal modification was transformed into the monoclinic one with the projected cell dimensions of a = 1.75, b = 1.36 nm and γ = 110°. The transformation occurred by progressive ‘shifting’ of rows of polymer necklaces in the [110] direction along the (110) plane in an original tetragonal lamellar crystal. Complexes lost weight by 10-15% in the process of heating up to 140 °C. The tetragonal crystalline modification was transformed into the hexagonal one, and concurrently, the X-ray diffraction profiles of annealed complexes were broadened. When a sample was dried in a vacuum at room temperature or annealed at high temperatures, followed by exposure to water vapor, the original tetragonal crystalline structure was recovered, restoring the original degree of orientation of crystallites in the sample. When water molecules were removed, the lateral stacking order of γ-CD-polymer complexes was destroyed, but the basic necklace structure in which polymer chains threaded through the cavity of γ-CD rings' structure could be retained.     

Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

Temperature Dependence of Young's Modulus and Internal Friction in Alumina, Silicon Nitride, and Partially Stabilized Zirconia Ceramics

The temperature dependence of Young's modulus and internal friction (Q⁻¹)in alumina, silicon nitride, and partially stabilized zirconia (Y-PSZ) ceramics was studied. Little change in Q⁻¹ was found for alumina, whereas Q⁻¹ for silicon nitride ceramics increased above 700°C. The Q⁻¹ of Y-PSZ increased markedly with increasing temperature up to a peak at ∼200°C.     

Fast, externally triggered, digital phase controller for an optical lattice

We present a method to control the phase of an optical lattice according to an external trigger signal. The method has a latency of less than 30 μs. Two phase locked digital synthesizers provide the driving signal for two acousto-optic modulators which control the frequency and phase of the counter-propagating beams which form a standing wave (optical lattice). A micro-controller with an external interrupt function is connected to the desired external signal, and updates the phase register of one of the synthesizers when the external signal changes. The standing wave (period λ/2 = 390 nm) can be moved by units of 49 nm with a mean jitter of 28 nm. The phase change is well known due to the digital nature of the synthesizer, and does not need calibration. The uses of the scheme include coherent control of atomic matter-wave dynamics.     

Data-driven dual-rate cascade control and application to pitch angle control of UAV

A data-driven design method for a cascade control system is proposed. The cascade control system consists of inner and outer loops, where the control interval of the outer loop is an integer multiple of the inner loop; hence, the system is a dual-rate system. In the proposed method, controllers in the inner and outer loops are designed based on one-shot data. In such a dual-rate cascade system, since the controllers are designed using different data-rate signals, the lifting technique is applied to align the dual-rate data. To show its effectiveness, the proposed method is compared with a conventional single-rate cascade control method, and numerical simulations and experiments are presented to examine servo and regulation performance.