Method for Preparation of Semiconductor Quantum‐Rod Lasers in a Cylindrical Microcavity

An efficient method for preparation of semiconductor quantum rod films for robust lasing in a cylindrical microcavity is reported. A capillary tube, serving as the laser cavity, is filled with a solution of nanocrystals and irradiated with a series of intense nanosecond laser pulses to produce a nanocrystal film on the capillary surface. The films exhibit intense room‐temperature lasing in whispering‐gallery modes that develop at the film–capillary interface as corroborated from the spacing detected for the lasing modes. Good lasing stability is observed at moderate pump powers. The method was applied successfully to several quantum‐rod samples of various sizes.     

Peer consultation groups for psychologists in private practice: A national survey.

We report the results of the first national survey of psychologists in private practice regarding their participation in peer consultation groups. The sample (71% return) was drawn from 800 randomly selected psychologists listed in the National Register of Health Service Providers in Psychology. We found that 23% of the sample currently belonged to peer consultation groups, and 24% had belonged in the past. Of those not currently in groups, 61% expressed the desire to belong if one were available. There were virtually no significant demographic differences between current members and nonmembers. We examined the following group characteristics: formation, length of existence, size, membership, leadership, theoretical orientation, range of experience, time and place, content, and group process. Groups tended to be small, informal, and leaderless; however, we found great variation among groups on all dimensions. Findings also showed a high degree of satisfaction with membership. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pressure swing adsorption: Development of an equilibrium theory for gas separations

Two versions of the pressure swing adsorption process are analysed as a means for purification of the light component of a binary feed of arbitrary composition. Local equilibrium with linear, uncoupled isotherms is assumed. The results of the analysis show that a critical pressure ratio must be exceeded before complete purification is possible and that this pressure ratio increases as the light-component content of the feed decreases. When clean up of the light component is complete, pressurization with product leads to higher light-component recoveries than pressurization with feed. This difference becomes large for small separation factors, small fractions of the light component in the feed, and large pressure ratios.     

A diffusion model for tungsten powder carburization

A mathematical model describes the carburization kinetics of tungsten powders mixed with carbon and heated in hydrogen. It is based on diffusion of carbon through a shell of WC growing into particles which are modeled as spheres. The activation energy is 58 kcal/mole in the temperature range 1056 to 1833 °C. Hydrogen gas is important to transport carbon as methane or acetylene, but increased hydrogen pressure increases the rate of carburization so little that an adsorbed species such as CH probably controls the carbon concentration at the particle surface. Formerly with the Lamp Metals Laboratory, deceased, was Professor of Metallurgy at Case Western Reserve University Cleveland OH.     

On the learning control of a robot manipulator

This paper derives a learning control law to achieve trajectory following for a robot manipulator. The controller consists of two parts, a computed torque servo for the rigid body terms that can be modelled and a learning law for the unmodelled dynamics. An advantage of this method is that bounds can be assigned to the position and velocity tracking errors.     

Terahertz imaging: materials and methods

Terahertz (THz) imaging is rapidly developing. We present two new methods, based respectively on (a) a broadband thermal source (globar) and (b) a coherent, monochromatic source (optically-pumped THz laser). A room-temperature detector (Golay cell) is employed. Image quality is similar to that reported by others using more complex sources (quantum cascade lasers) and detectors (superconducting tunneling junctions).     

Influence of ion bombardment on the properties and microstructure of unbalanced magnetron deposited niobium coatings

The effect of the ion bombardment to unbalanced magnetron deposited, approximately 1.5 and 4.5 μm thick, Nb coatings have been investigated as the bias voltage was varied from U_B=−75 to −150 V. Increasing bias voltage increased the hardness of the coating from 4.5 to 8.0 GPa. This was associated with residual stress and Ar incorporation into the Nb lattice. Strong {110} texture developed in the samples deposited at low bias voltages, while beyond U_B=−100 V a {111} texture became dominant. However, strong {111} texture was observed only with the thicker 3Nb coatings. Secondary electron microscopy investigation of the coating topography showed fewer defects in the thicker coatings. All coatings exhibited good corrosion resistance, with the thicker coatings clearly outperforming the thinner ones. Excessive bias voltages (U_B=−150 V) was found to lead to poor adhesion and loss of corrosion resistance.     

Ozone measurement in visible region: an optical fibre sensor system

Ozone measurement based on the optical absorption of visible light at 603 nm using polymer optical fibres is investigated and tested. Comparisons with a commercial UV based sensor demonstrate the ability of the visible based sensor to measure high concentrations over a range 27-127 mg/litre. A resolution of 5 mg/litre is also demonstrated for this sensor.