Chidamber and Kemerer's metrics suite: a measurement theoryperspective

The metrics suite for object-oriented design put forward by Chidamber and Kemerer (1994) is partly evaluated by applying principles of measurement theory. Using the object coupling measure (CBO) as an example, it is shown that failing to establish a sound empirical relation system can lead to deficiencies of software metrics. Similarly, for the object-oriented cohesion measure (LCOM) it is pointed out that the issue of empirically testing the representation condition must not be ignored, even if other validation principles are carefully obeyed. As a by-product, an alternative formulation for LCOM is proposed     

An incentive scheduling mechanism for peer-to-peer video streaming

P2P video streaming networks are found as a scalable solution and an alternative for traditional client–server based video streaming over the Internet. One of the significant issues affecting the success of any P2P streaming network is cooperation between peers. Practical observations have proved the prevalence of free riders in P2P networks that degrade their performance. To solve this problem, using incentive mechanisms, which encourage peers to contribute more in the network, is necessary. In this paper, we designed and proposed a distributed and scalable incentive mechanism for mesh based P2P video streaming networks. In the proposed approach the contribution of the peers is measured and maintained in a distributed fashion. Furthermore, we proposed an incentive sending side scheduler in which peers are served based on their contribution in the network. Our simulation evaluations show the efficiency of the proposed approach in improving the overall perceived video quality by the non-free rider nodes and consequently in the whole network.     

Spray-Coating of Superhydrophobic Coatings for Advanced Applications

Superhydrophobic coatings are widely applicable, e.g., as self-cleaning surfaces or water–oil separation membranes, yet their wider usage is impeded due to costs of fabrication, size, or substrate limitation. Spray-coating is a versatile coating procedures and might offer a good solution for the fabrication of these superhydrophobic coatings, due to the fact that coatings can be fabricated on various materials in a simple, fast, and inexpensive manner. Most procedures rely on hybrid coatings of hydrophobized nanoparticles and a polymeric matrix, which have several drawbacks including the easy loss of nanoparticles and difficult waste handling. Here, the fabrication of the superhydrophobic material, called Fluoropor, for the first time, by spray-coating on various substrates including metals, tissues, concrete, and glass is presented. It is fabricated by spray-coating a mixture of a highly fluorinated monomer blended with porogens followed by photopolymerization. The superhydrophobicity of the material relies on the porous structure on the micro-/nanoscale across the bulk material and does not require any nanoparticles. Excellent self-cleaning ability of these coatings, resistance against thermal and abrasive impact, and their application as oil–water separation membranes are shown. This versatile applicability is highly promising for real-world application as self-cleaning coatings or oil–water separating membranes.     

Structural Properties of Networked Control Systems With Bandwidth Limitations and Delays

The structural properties of networked control systems with both bandwidth limitations and delays are investigated. Sufficient conditions are given for controllability (stabilizability) and reconstructibility (detectability). Our results enhance previous works by capturing bandwidth limitations and delays simultaneously. The adopted modeling framework could be readily used in control and estimation methods, including optimal and predictive schemes. It also facilitates the use of scheduling optimization algorithms in conjunction with the control scheme presented.     

Describing a strategy to estimate the CO2-heavy oil minimum miscibility pressure based on the experimental methods

To measure MMP, slim tube method is time consuming, especially for heavy oils. In this study, a strategy is considered to measure the MMP in one of the Iranian heavy oil reservoirs. The strategy steps were done through; partial data of slim tube, coupling numerical model (CNM), full slim tube, and VIT test. The results showed that CNM technique with two experimental data obtains the MMP value faster than running a full slim tube with low error result. However, VIT determined MMP faster and its results illustrated that miscibility pressure for heavy oil occurs at zero IFT, unlike light oils.     

Two-sided wind catcher performance evaluation using experimental,numerical and analytical modeling

Experimental wind tunnel and smoke visualization testing as well as CFD and analytical modeling were conducted to investigate the performance of a two-sided wind catcher. This type of wind catcher is divided internally into two halves for the purposes of air supply and extract. In this study, the two-sided wind catcher model was constructed of two similar one-sided wind catcher models, which were attached together back to back. These one-sided models are 1:40 scale models of Kharmani's School wind catcher in the city of Yazd. Experimental investigations were carried out using an open-circuit wind tunnel and both the induced volumetric airflow into the building and the pressure coefficients around all surfaces of the wind catcher model were measured at various wind angles. Furthermore, the CFD simulation was also used to evaluate the pressure coefficient distribution and airflow pattern around and through the wind catcher. Additional experimental tests and computational fluid dynamics simulation of the wind catcher in the wind tunnel were also conducted in order to assess the accuracy of measurement procedures and the uncertainty of experimental results. This article also represents a semi-empirical approach in which experimental data were used for a detailed analytic model, in order to provide an accurate estimate of the performance of wind catchers. It was found that for an isolated two-sided wind catcher model, the maximum efficiency is achieved at the angle of 90°. At this air incident angle the wind catcher efficiency increases approximately 20% more than the one at zero angle. The experimental investigations demonstrated the potential of two-sided wind catcher for enhancing the natural ventilation inside buildings. It can be seen that CFD simulation and analytical modeling results have a good agreement with the experimental results. Theoretical modeling can also help to assess the accuracy of measurement procedures and the uncertainty of experimental results.     

Viscoelastic and mechanical properties of multi walled carbon nanotube/epoxy composites with different nanotube content

The viscoelastic and mechanical properties of composites multi walled carbon nanotube (MWNT)/epoxy at different weight fractions (0.1, 0.5, 1 and 2 wt.%) were evaluated by performing tensile and dynamic-mechanical thermal analysis (DMTA) tests. The MWNT/epoxy composite were fabricated by sonication and a cast molding process. The results showed that addition of nanotubes to epoxy had significant effect on the viscoelastic and mechanical properties. However, the use of 0.5 wt.% increased the viscoelastic properties more significantly. Concerning viscoelastic modeling, the COLE–COLE diagram has been plotted by the results of DMTA test. These results show a good agreement between the Perez model and the viscoelastic behavior of the composite.