Thermoplastic elastomeric composition based on maleic anhydride–grafted ground rubber tire

Ground rubber tire (GRT) powder was maleated in an internal mixer using maleic anhydride and dicumyl peroxide at 160°C. Maleated GRT was characterized by using X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, wettability, and differential scanning calorimetry. The physical properties of the dynamically vulcanized 60 : 40, rubber : plastic composition based on acrylated high‐density polyethylene as the plastic phase and ethylene propylene diene rubber containing maleated GRT as the rubber phase were found to be greater than the corresponding composition containing nonmaleated GRT. The blend was found to be reprocessable, like themoplastic elastomers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 370–378, 2002; DOI 10.1002/app.10348     

Evidence for glaucoma-induced horizontal cell alterations in the human retina

In this study we investigated changes to horizontal cells in human retinae affected by glaucoma. Glaucoma is characterized by raised intraocular pressure and is responsible for retinal ganglion cell and, possibly, photoreceptor degeneration. It was therefore assumed that horizontal cells might also be affected. The carbocyanine dye DiI was placed at discrete points on fixed, whole-mounted retinae obtained from normal and glaucomatous patients. After allowing 6-24 weeks for intramembranous diffusion within the lipid layers of the nerve cells and, therefore, fluorescent labeling, we measured horizontal cell soma and dendritic field sizes. Selected cells were then embedded in Araldite and cut at 4 microns. Horizontal cells in glaucomatous eyes appeared larger and had a granulated outline as compared with cells from normal retinae. Analysis of the mean cell soma size indicated that cells were 26% larger in the glaucomatous retinae and that this increase was significantly different from that seen in normal retinae (P < 0.05). The dendritic field size was unaffected (P > 0.05). As seen in cross section there was a clear loss of photoreceptor outer segments, and shrunken silhouettes of photoreceptor inner segments with pyknotic nuclei were observed. It is proposed that the increase in some size is indicative of horizontal cell responses that are likely to culminate in degeneration as a result of heightened intraocular pressure. In addition, this paper provides further evidence that photoreceptors are affected by advanced glaucoma.     

Bioenergetic Alterations of Metabolic Redox Coenzymes as NADH,FAD and FMN by Means of Fluorescence Lifetime Imaging Techniques

Metabolic FLIM (fluorescence lifetime imaging) is used to image bioenergetic status in cells and tissue. Whereas an attribution of the fluorescence lifetime of coenzymes as an indicator for cell metabolism is mainly accepted, it is debated whether this is valid for the redox state of cells. In this regard, an innovative algorithm using the lifetime characteristics of nicotinamide adenine dinucleotide (phosphate) (NAD(P)H) and flavin adenine dinucleotide (FAD) to calculate the fluorescence lifetime induced redox ratio (FLIRR) has been reported so far. We extended the FLIRR approach and present new results, which includes FLIM data of the various enzymes, such as NAD(P)H, FAD, as well as flavin mononucleotide (FMN). Our algorithm uses a two-exponential fitting procedure for the NAD(P)H autofluorescence and a three-exponential fit of the flavin signal. By extending the FLIRR approach, we introduced FLIRR1 as protein-bound NAD(P)H related to protein-bound FAD, FLIRR2 as protein-bound NAD(P)H related to free (unbound) FAD and FLIRR3 as protein-bound NAD(P)H related to protein-bound FMN. We compared the significance of extended FLIRR to the metabolic index, defined as the ratio of protein-bound NAD(P)H to free NAD(P)H. The statistically significant difference for tumor and normal cells was found to be highest for FLIRR1.     

Effect of thiophosphoryl compounds as accelerators and coupling agents on the vulcanization of NR‐XNBR blend

The effect of a number of thiophosphoryl compounds [viz., bis(isobutyl) thiophosphoryl di‐, tri‐, and tetrasulfides and bis(dicyclohexyl) thiophopsphoryl di‐, tri‐, and tetrasulfides] on natural rubber (NR)‐carboxylated nitrile rubber (XNBR) blend was studied. All these thiophosphoryl compounds are capable of forming interrubber links leading to covulcanized blends which exhibit a fair degree of synergism with respect to physical properties, the maximum being obtained at the 25% NR and 75% XNBR blend composition. This is an obvious claim that the blend under investigation is technologically compatible, having some degree of interrubber interaction which is enhanced in case of two‐stage vulcanization. The existence of interrubber interaction is judged by the swelling experiment. The blend morphology assessed by SEM micrographs corroborates the foregoing observations and accounts for the significant improvement in physical properties of the blend vulcanizates, particularly in two‐stage vulcanization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3286‐3299, 2002     

Melt‐processable rubber: Chlorinated waste tire rubber‐filled polyvinyl chloride

Chlorinated ground rubber tire (Cl‐GRT) particles were used as filler in a plasticized polyvinylchloride (PVC) to develop a melt‐processable rubber composition. Physical properties of the Cl‐GRT‐filled PVC compound showed improvement compared to the nonchlorinated counterpart. Interaction between Cl‐GRT and PVC was examined on the basis of results of stress relaxation, dynamic mechanical thermal analysis, and solvent swelling studies. The Cl‐GRT could be loaded upto 40 parts per hundred parts of PVC, and the composition still retains the elastomeric characteristics. The Cl‐GRT‐filled composite was found to be reprocessable like the unfilled PVC compound. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 622–631, 2002; DOI 10.1002/app.10352     

Rare-earth doped zirconia fibres by sol-gel processing

Polycrystalline zirconia fibres, doped with 2–8 mol% of oxides of trivalent lanthanum, praseodymium, neodymium, samarium, gadolinium, and dysprosium (in decreasing cation size), were prepared by spinning of acetate-derived sols and baking the gel fibres thus obtained at 900–1300 °C for 1 h. The larger sized dopants lanthanum, praseodymium and neodymium (Group A) gave rise to tetragonal zirconia, with or without cubic zirconia, at 900 °C which converted partly or fully to monoclinic zirconia, in certain cases accompanied by a cubic zirconate phase at higher temperatures. The smaller sized dopants samarium, gadolinium and dysprosium (Group B) generated only tetragonal or cubic, or both polymorphs of zirconia, depending on the cation type, concentration and temperature. This stabilization of higher symmetry polymorphs with Group B dopants was associated with relatively large crystallite size (especially when calcined at 1300 °C). The maximum tensile strength values of usable fibres calcined at 1300 °C were found to decrease with increasing size in dopant dysprosium > gadolinium > samarium > neodymium, praseodymium, lanthanum=0). Although all the dopant cations were larger in size than Zr⁴⁺ (in the same oxygen coordination), the relative closeness in size of Group B cations with Zr⁴⁺ was considered to be the reason behind the obtained differences in properties.     

Secured secret sharing technique based on chaotic map and DNA encoding with application on secret image

This paper shows a secured key-based (k, n) threshold cryptography scheme, where key as well as secret data is shared among set of participants. In this scheme, each share has some bytes missing and these missing bytes can be recovered from a set of exactly k shares, but not less than k. Therefore, each share contains partial secret information which is also encrypted by DNA encoding scheme. Additionally, this paper introduces a concept, where each share information size is varied. More precisely, each share contains a different percentage of secret information and which is strongly dependent on the key. Moreover key sensitivity analysis and statistical analysis prove the robustness against different cryptanalysis attacks and thus ensures high acceptability for information security requirements.     

Meticulous analysis and consequences of microstructure changes on melt rheology and dynamic viscoelasticity of thermoplastic vulcanizates upon reprocessing

Thermoplastic vulcanizates (TPVs), which are a special class of elastomer alloy, prepared by dynamic vulcanization possess unique morphology of finely dispersed micron‐size cross‐linked elastomeric particles in a continuous thermoplastic matrix. The present study investigates the microstructure formation of elastomeric phase and its associated morphological changes during reprocessing of TPVs based on poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] triblock co‐polymer (S‐EB‐S) and solution polymerized styrene butadiene elastomer (S‐SBR) by scanning electron microscopy and atomic force microscopy. Semi‐efficient and efficient sulfur‐based curing systems have been adopted to cure the elastomeric phase and a comparative study has been made to demonstrate and explain the effect of reprocessing on the melt rheology and dynamic viscoelasticity of the TPVs. The present work also provides a better insight and guidance to control the microstructure of the cross‐linked elastomeric phase to prepare selectively co‐continuous or dispersed phase morphology. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41182.     

A study on dynamic rheological characterisation of electron beam crosslinked high vinyl styrene butadiene styrene block copolymer

Crosslinking of elastomers using electron beam radiation has several advantages over conventional method. It is accomplished much faster, in a more environmental friendly approach and in a much simpler manner. When fast moving electrons that are generated from electron accelerators are targeted on a polymer matrix, they primarily crosslink the polymer. However, in the process, some chain scission may also occur. In this work, a high vinyl (~50%) styrene–butadiene–styrene (S–B–S) block copolymer was used as the base polymer. Radiation doses were varied from 25 to 300 kGy. A detailed investigation was made to understand the effect of electron beam radiation on the rheological properties such as storage modulus, loss modulus, storage viscosity and complex viscosity of the block copolymer under strain and frequency sweeps performed in a Rubber Process Analyzer (RPA). Recyclability of the crosslinked S–B–S polymer was also explored by RPA and mechanical studies.