Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Geochemical characteristics of the Yufuin outflow plume, Beppu hydrothermal system, Japan

Thermal water at Yufuin (Kyushu Island, Japan) is tapped through about 820 shallow wells and used mainly for hot-spring bathing purposes. Chemical and isotopic data for fluids from wells and fumaroles in Yufuin and Beppu indicate that the thermal activity at Yufuin represents a dilute, westward-flowing hydrothermal outflow plume from the Beppu hydrothermal system. Two other (eastward-flowing) outflow plumes have long been recognized at Beppu, but the Yufuin outflow plume is first recognized here. The Yufuin outflow plume is apparently a mixture of two end-member fluids: (1) deep high-temperature (250–300°C) fluid from the Beppu system having high chloride concentration (1400–1600 mg/L) and a δ¹⁸O value near −6.0%, and (2) meteoric water having low chloride concentration (≤7 mg/L) and a δ¹⁸O value near −9.2%.A permeable conduit for the vertical and lateral transport of deep fluid from the Beppu system is provided by the Yufuin Fault zone, which extends westward from the southern flank of Mt. Tsurumi volcano to the town of Yufuin. Stable isotope ratios and chloride concentrations for shallow groundwaters near the eastern end of the fault, at an elevation near 700 m, are consistent with those required for the low-chloride meteoric end-member of the Yufuin thermal waters. Recharge of this meteoric water, as well as mixing with the Beppu deep fluid, may occur along the Yufuin Fault. Enthalpy-chloride relations indicate additional conductive heating of the Yufuin waters, in the amount of 350–500 kJ/kg beyond that which can be accounted for by mixing between Beppu deep fluid and meteoric water. This could be a result of conductive heating with convection to a depth of 1–2 km. Estimates of the magnitude of the heat source for the Beppu hydrothermal system should take into account the heat being discharged at Yufuin.     

Composite sheets with biodegradable polymers and paper,the effect of paper strengthening agents on strength enhancement,and an evaluation of biodegradability

Composite sheets composed of biodegradable polymers (BP) and paper were prepared, and their physical and biodegradable properties were investigated. The paper sheets were soaked in BP emulsions and cured at 100°C for 20 min. The wet strength of composite sheets with the same basis weight increased significantly with increasing BP content, although dry strength increased only moderately. A 0.5% addition of a common wet paper‐strengthening agent, poly(amidoamine‐epichlorohydrin) (PAE) resin, enhanced the wet strength, which reached 9.3 MPa, of composite sheets consisting of a BP : paper ratio of 20 : 80. Further enhancement was achieved by the addition of polyvinylamines (PVAm). The wet tensile strength of composite sheets consisting of BP and paper (20 : 80) increased by 27% with the addition of 0.2% PVAm and 0.5% PAE, whereas it was enhanced by only 3–4% with the addition of 0.7% PAE. The biodegradability of the composite sheets was somewhat retarded by the addition of PAE and PVAm. However, a 90% weight loss was observed 60 days after placing composite sheet samples in soil. A similar weight loss was observed after 45 days for composites without additives and after 30 days for base paper alone. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 861–866, 2005     

Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Tribological Characteristics of SiC Ceramics in High-Temperature and High-Pressure Water

The effects of temperature and sliding speed on the tribological behavior of a SiC ceramic by sliding on the same material in deoxygenated water were investigated from room temperature to 300°C under the corresponding saturated vapor pressures. The friction coefficient and specific wear rates of both plates and disks increased at elevated temperatures at all sliding speeds, but decreased with increasing sliding speed at 120° and 300°C. Fine mirrorlike worn surfaces were observed without wear debris under all sliding conditions. The wear mechanism appears to consist of hydrothermal oxidation of SiC and dissolution of reaction products such as silica.     

Outdoor autonomous navigation using SURF features

In this article, we propose a speeded-up robust features (SURF)-based approach for outdoor autonomous navigation. In this approach, we capture environmental images using an omni-directional camera and extract features of these images using SURF. We treat these features as landmarks to estimate a robot’s self-location and direction of motion. SURF features are invariant under scale changes and rotation, and are robust under image noise, changes in light conditions, and changes of viewpoint. Therefore, SURF features are appropriate for the self-location estimation and navigation of a robot. The mobile robot navigation method consists of two modes, the teaching mode and the navigation mode. In the teaching mode, we teach a navigation course. In the navigation mode, the mobile robot navigates along the teaching course autonomously. In our experiment, the outdoor teaching course was about 150 m long, the average speed was 2.9 km/h, and the maximum trajectory error was 3.3 m. The processing time of SURF was several times shorter than that of scale-invariant feature transform (SIFT). Therefore, the navigation speed of the mobile robot was similar to the walking speed of a person.     

Replica Exchange Light Transport

We solve the light transport problem by introducing a novel unbiased Monte Carlo algorithm called replica exchange light transport, inspired by the replica exchange Monte Carlo method in the fields of computational physics and statistical information processing. The replica exchange Monte Carlo method is a sampling technique whose operation resembles simulated annealing in optimization algorithms using a set of sampling distributions. We apply it to the solution of light transport integration by extending the probability density function of an integrand of the integration to a set of distributions. That set of distributions is composed of combinations of the path densities of different path generation types: uniform distributions in the integral domain, explicit and implicit paths in light (particle/photon) tracing, indirect paths in bidirectional path tracing, explicit and implicit paths in path tracing, and implicit caustics paths seen through specular surfaces including the delta function in path tracing. The replica‐exchange light transport algorithm generates a sequence of path samples from each distribution and samples the simultaneous distribution of those distributions as a stationary distribution by using the Markov chain Monte Carlo method. Then the algorithm combines the obtained path samples from each distribution using multiple importance sampling. We compare the images generated with our algorithm to those generated with bidirectional path tracing and Metropolis light transport based on the primary sample space. Our proposing algorithm has better convergence property than bidirectional path tracing and the Metropolis light transport, and it is easy to implement by extending the Metropolis light transport.     

Influence of a fiber-network microstructure of paper-structured catalyst on methanol reforming behavior

A novel microstructured catalyst that consists of Cu/ZnO catalyst powders and ceramic fibers was successfully prepared using pulp fibers as a tentative matrix by a papermaking technique. As-prepared material, called a paper-structured catalyst, possessed porous microstructure with layered ceramic fiber networks (average pore size ca. 20 μm, porosity ca. 50%). In the process of methanol autothermal reforming (ATR) to produce hydrogen, paper-structured catalysts demonstrated both high methanol conversion and low concentration of undesirable carbon monoxide as compared with catalyst powders and pellets. The catalytic performance of paper-structured catalysts depended on the use of pulp fibers, which were added in the paper-forming process and finally removed by thermal treatment before ATR performance tests. Confocal laser scanning microscopy and mercury intrusion analysis suggested that the tentative pulp fiber matrix played a significant role in regulating the fiber-network microstructure inside paper composites. Various metallic filters with different average pore sizes, used as supports for Cu/ZnO catalysts, were subjected to ATR performance tests for elucidating the pore effects. The tests indicated that the pore sizes of catalyst support had critical effects on the catalytic efficiency: the maximum hydrogen production was achieved by metallic filters with an average pore size of 20 μm. These results suggested that the paper-specific microstructures contributed to form a suitable catalytic reaction environment, possibly by promoting efficient diffusion of heat and reactants. The paper-structured catalyst with a regular pore microstructure is expected to be a promising catalytic material to provide both practical utility and high efficiency in the catalytic gas-reforming process.     

An investigation of the pH-activity relationships of Cex, a family 10 xylanase from Cellulomonas fimi: xylan inhibition and the influence of nitro-substituted aryl-beta-D-xylobiosides on xylanase activity

The kinetic parameters of Cex, a family 10 xylanase from Cellulomonas fimi, were determined at various pH levels using soluble birchwood xylan (BWX) as a natural polymeric substrate along with three other synthetic aryl-beta-D-xylobioside substrates. Using BWX, a high level of substrate inhibition was observed which increased with decreasing pH. In contrast, typical Michaelis-Menten-type profiles were obtained using the three aryl-beta-D-xylobiosides as substrates. The k(cat) values determined using o-nitrophenyl-beta-D-xylobioside did not change as the pH increased, whereas the k(cat) values obtained with BWX, phenyl-beta-D-xylobioside and p-nitrophenyl-beta-D-xylobioside decreased, suggesting that the presence of an ortho nitro group affects the activity displayed by Cex. These differences were not observed with XynB from Clostridium stercorarium F9, a member of the same family of xylanases as Cex. These results indicate that a careful evaluation is required when employing substituted aryl-beta-D-xylobiosides in the characterization of xylanases.     

Antiferromagnetic Order in the Ladder Compound SrCu2O3; Cu-NMR/NQR Measurements

We carried out the extensive Cu-nuclear magnetic and quadrupole resonance (NMR/NQR) experiments on the Zn(Ni)-doped ladder compound SrCu ₂ O ₃ (Sr123), Sr(Cu _1–x M _x ) ₂ O ₃ (M=Zn and Ni) with x 0.02 and the Ladoped Sr123, Sr _1–x La _x Cu ₂ O ₃ with x 0.03. A spin-correlation length _s /a (a: the lattice spacing between the Cu sites along the leg) of nonmagnetic impurity-induced staggered polarization (IISP) estimated from a quasi-one-dimensional (Q1D) IISP along the two legs in the 0.1–2 % Zn-doped Sr123 was found to be independent of temperature (T) and scaled to an mean impurity distance D _AV with the relation of _s /a = 2.5 + 0.1D _AV The _s /a's are much longer in x = 0.001 ( _s /a 50) and 0.005 ( _s /a 12) than an instantaneous spin-correlation length ₀ /a 3 – 8 in Sr123. The formula of Néel T, T _N (WC-Q1D)=J exp(–D _AV /(_s/a)) (J = 2000 K) based on the weakly interladder-coupled (WC) Q1D model explains the experimental T _N values quantitatively.