Impact-induced delayed detonation in an energetic material debris bubble formed at an air gap

A planar model of a rocket motor has been developed that allows reaction in a central bore perforated by a projectile to be viewed with high-speed photography. Earlier work with this model showed that a “bubble” of propellant debris forms in the air gap between energetic material layers (bore region) as a result of projectile penetration of one of the layers. Ignition of the bubble occurs upon impact with the second layer, followed by a reaction ranging from mild burning to delayed delonation, depending on the width of the air gap, properties of the energetic material, and degree of confinement. The present paper presents the results of experimental and hydrocode studies to characterize the latter (delayed detonation) reaction. Results show that reaction initiates in the frontal portion of the bubble wall through mechanical (impact) shock. It then propagates backward through the bubble wall towards the first layer which then detonates. Detonation of the second layer occurs sympathetically. The reaction is bounded by a lower velocity limit and confined within a range of air gaps that increases with impact velocity. The upper-air-gap limit roughly coincides with the maximum expansion distance for the bubble before breakup, while the lower limit represents the minimum (threshold) damage level for detonation.     

New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.     

Activation of Ni/A12O3 catalysts through modification of the Al2O3 support

The effect of alumina pretreatment on the performance of alumina supported nickel catalysts was demonstrated in gas phase hydrogenation of toluene to methylcyclohexane. The state of the alumina was changed from pure to pure phase through various heat treatments in air. The catalysts were prepared from vapor phase by saturating the accessible binding sites on the pretreated alumina with the nickel precursor. The highest number of active sites for hydrogenation was observed for catalysts prepared on alumina having an incomplete phase transition and a / alumina phase ratio between 0.5 and 10. Results from temperature programmed desorption (TPD) studies revealed that a maximum in weakly chemisorbed hydrogen as well as in total amount of desorbed hydrogen was found for the same catalysts. By hydrogen chemisorption studies the total hydrogen uptake was found to correlate with the observed hydrogenation maximum. It is suggested that both the chemical and physical properties of the alumina influence the activity. An optimal metal-support interaction and structural defects on the alumina due to the phase transition can explain the observed maximum in the number of active sites and in hydrogen uptake.     

Cathodic arc deposition technology

Cathodic arc deposition is a unique technology. An arc spot on a cathode generates a plasma consisting of cathode material with a high degree of ionization. The high concentration of ions allows control of film morphology, high adhesion, efficient reactive deposition of compounds and uniform deposition over a variety of shapes. The composition of the alloys is generally retained from source to substrate. Deposition rates cover a wide range from nanometers per minute to tens of micrometers per minute. Many aspects of the technology warrant further study and its applications are only just beginning.     

Sociomaterial actors in the assimilation gap: a case study of web service, management and IT-assimilation

This paper investigates the conditions for the assimilation of information systems (IS) and information technology (IT) in organizations and the influence of various actors in the organization and eBusiness context. To do so it draws on the literature on assimilation gap, sociomateriality and infrastructure together with a study of implementation and use of information and communication technology in and among organizations in a Swedish region. There were substantial investments in web infrastructure made on a regional level and the focus of this study is how the investments were transformed and assimilated in practices, relations and communication. Based on the empirical data from the case study, the paper extends the assimilation process into interplay among actors in organizations contexts. It describes organizations’ strategies for coping with their needs for information and the actors in these processes. Two categories of actors are identified, sensemaking and sensegiving actors, as most important in assimilation of IS/IT in organizations. A sociomaterial perspective gives guidance and a better understanding of the assimilation process in terms of knowledge and interpretative frames, and how assimilation involves identity construction and negotiations among sensemaking and sensegiving actors. The contribution of this paper is a better understanding of the context of assimilation and adaptation of IT in organizations’ business processes, and steps to be taken to improve readiness.     

Recent developments in large‐area photomasks for display applications

One of the most critical areas in the manufacturing process for FPD panels or shadow masks for CRTs is lithography. Most existing lithography technologies require high‐quality large‐area photomasks. The requirements on these photomasks include positioning accuracy (registration) and repeatability (overlay), systematic image quality errors (“mura” or display quality), and resolution (minimum feature size). The general trend toward higher resolution and improved performance, e.g., for TFT desktop monitors, has put a strong focus on the specifications for large‐area‐display photomasks. This article intends to give an overview of the dominant issues for large‐area‐display photomasks, and illustrates differences compared with other applications. The article will also present state‐of‐the‐art methods and trends. In particular, the aspects of positioning accuracy over large areas and systematic image‐quality errors will be described. New qualitative and objective methods have been developed as means to capture systematic image‐quality errors. Results indicating that errors below 25 nm can be found early in the manufacturing process is presented, thus allowing inspection for visual effects before the actual display is completed. Positioning accuracy below 400 nm (3 sigma) over 720 × 560 mm have been achieved. These results will in the future be extended up toward 1 × 1 m for generation 4 in TFT‐LCD production.     

Open Embedded Control

Embedded control devices today usually allow parameter changes, and possibly activation of different pre-implemented algorithms. Full reprogramming using the complete source code is not allowed for safety, efficiency, and proprietary reasons. For these reasons, embedded regulators are quite rigid and closed concerning the control structure. In several applications, like industrial robots, there is a need to tailor the low level control to meet specific application demands. In order to meet the efficiency and safety demands, a way of building more generic and open regulators has been developed. The key idea is to use pieces of compiled executable code as functional operators, which in the simplest case may appear as ordinary control parameters. In an object oriented framework, this means that new methods can be added to controller objects after implementation of the basic control, even at run-time. The implementation was carried out in industrially well accepted languages such as C and C++. The dynamic binding at run-time differs from ordinary dynamic linking in that only a subset of the symbols can be used. This subset is defined by the fixed part of the system. The safety demands can therefore still be fulfilled. Encouraged by results from fully implemented test cases, we believe that extensive use of this concept will admit more open, still efficient, embedded systems.