Quantitative risk assessment using a Japanese hydrogen refueling station model

Although hydrogen refueling stations (HRSs) are becoming widespread across Japan and are essential for the operation of fuel cell vehicles, they present potential hazards. A large number of accidents such as explosions or fires have been reported, rendering it necessary to conduct a number of qualitative and quantitative risk assessments for HRSs. Current safety codes and technical standards related to Japanese HRSs have been established based on the results of a qualitative risk assessment and quantitative effectiveness validation of safety measures over ten years ago. In the last decade, there has been much development in the technologies of the components or facilities used in domestic HRSs and much operational experience as well as knowledge to use hydrogen in HRSs safely have been gained through years of commercial operation. The purpose of the present study is to conduct a quantitative risk assessment (QRA) of the latest HRS model representing Japanese HRSs with the most current information and to identify the most significant scenarios that pose the greatest risks to the physical surroundings in the HRS model. The results of the QRA show that the risk contours of 10^?3 and 10^?4 per year were confined within the HRS boundaries, whereas the risk contours of 10^?5 and 10^?6 per year are still present outside the HRS. Comparing the breakdown of the individual risks (IRs) at the risk ranking points, we conclude that the risk of jet fire demonstrates the highest contribution to the risks at all of the risk ranking points and outside the station. To reduce these risks and confine the risk contour of 10^?6 per year within the HRS boundaries, it is necessary to consider risk mitigation measures for jet fires.     

High-resolution long-array thermal ink jet printhead fabricated by anisotropic wet etching and deep Si RIE

This paper describes the fabrication and characterization of a thermal ink jet (TIJ) printhead suitable for high speed and high-quality printing. The printhead has been fabricated by dicing the bonded wafer, which consists of a bubble generating heater plate and a Si channel plate. The Si channel plate consists of an ink chamber and an ink inlet formed by KOH etching, and a nozzle formed by inductively couple plasma reactive ion etching (ICP RIE). The nozzle formed by RIE has squeezed structures, which contribute to high-energy efficiency of drop ejector and, therefore, successful ejection of small ink drop. The nozzle also has a dome-like structure called channel pit, which contributes to high jetting frequency and high-energy efficiency. These two wafers are directly bonded using electrostatic bonding of full-cured polyimide to Si. The adhesive-less bonding provided an ideal shaped small nozzle orifice. Use of the same material (Si substrate) in heater plate and channel plate enables the fabrication of high precision long printhead because no displacement and delamination occur, which are caused by the difference in thermal expansion coefficient between the plates. With these technologies, we have fabricated a 1" long printhead with 832 nozzles having 800 dots per inch (dpi) resolution and a 4 pl. ink drop volume.     

Network information criterion-determining the number of hiddenunits for an artificial neural network model

The problem of model selection, or determination of the number of hidden units, can be approached statistically, by generalizing Akaike's information criterion (AIC) to be applicable to unfaithful (i.e., unrealizable) models with general loss criteria including regularization terms. The relation between the training error and the generalization error is studied in terms of the number of the training examples and the complexity of a network which reduces to the number of parameters in the ordinary statistical theory of AIC. This relation leads to a new network information criterion which is useful for selecting the optimal network model based on a given training set.     

Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Aging time dependence of catastrophic optical damage (COD) failureof a 0.98-μm GaInAs-GaInP strained quantum-well laser

In this paper, we studied the aging time dependence of the catastrophic optical damage (COD) failure of an Al-free uncoated 0.98-μm GaInAs-GaInP strained quantum-well laser with an injection current as a parameter. Based on the stress-strength model, we first investigated experimentally the dependence of the critical power level (CPL) at which COD would take place upon the aging time. Then applying a statistical treatment to this result, we found for the first time that CPL data at each aging time could be considered to distribute according to the Weibull statistics, and the decrease rate of the CPL with the aging time depended very strongly on the injection current. Finally, using the relationship between the decrease rate of the CPL with the aging time and the current, we predicted roughly the time of a COD failure occurrence for both large and small current cases. As a result, we clarified that for our Al-free uncoated 0.98-μm laser, a COD failure became a fatal problem in the case of a large-current (high-power) operation     

DNA damage induced by m-phenylenediamine and its derivative in the presence of copper ion

We have previously reported that long-term priming of human polymorphonuclear neutrophilic granulocytes (PMN) with interferon-gamma (IFN-gamma) increased the fMLP-stimulated calcium influx. We now show that also after short-term incubation with IFN-gamma, PMN calcium metabolism is modulated. Single adherent cells in three different calcium-containing buffers (high, normal, and low [Ca2+]) were stimulated with the bacterial peptide fMLP or the Ca-ATPase inhibitor thapsigargin (Tg) after about 5 min preincubation with IFN-gamma. The results of this protocol indicated that IFN-gamma increases both calcium influx and calcium sequestration. Store dependent Ca2+ influx, directly measured on readdition of calcium to Tg-treated cells incubated in EGTA buffer, was significantly enhanced in IFN-gamma-treated cells. This effect of IFN-gamma was enhanced by the tyrosine kinase inhibitor herbimycin A. Strikingly, in low extracellular calcium concentrations, IFN-gamma induced calcium transients in 20%-60% of the cells. The proportion of PMN responding with Ca2+ transients increased with decreasing extracellular calcium concentration. Average lagtime from addition of IFN-gamma to a response that could be measured was 7.3 sec, and average increase in [Ca2+] above the basal level was 790 nM. These IFN-gamma-induced transients could not be depressed by herbimycin A. Thus, IFN-gamma can increase capacitative calcium influx, induce calcium transients, and possibly affect calcium sequestration in human PMN.     

25 Gbit/s selector module using 0.2 mu m GaAs MESFET technology

A high-speed selector module has been developed. It is constructed from a selector IC mounted in a ceramic package, a power supply unit, phase shifters, and coaxial cables. The IC was designed using LSCFL and fabricated with 0.2 mu m gate length GaAs MESFETs. The selector module operated above 25 Gbit/s. It is expected to be applied to high-speed IC measurements.<>     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.