Cyclic GMP inhibits and shifts the activation curve of the delayed-rectifier (I[K1]) of type I mammalian vestibular hair cells

NITRIC oxide (NO) plays a role in the modulation of the predominant potassium current of type I vestibular hair cells, a low-voltage activated current called I(K1). Since many effects of NO are mediated via cGMP, patch-clamp recordings were made to evaluate the effects of cGMP on I(K1). In whole-cell recordings 1 mM cGMP shifted Vhalf of I(K1) by 15.0 +/- 2.4 mV (n = 6) to more positive. In cell-attached 'multichannel' recordings 1 mM 8-bromo-cGMP caused a reversible shift of Vhalf by 13.8 +/- 2.6 mV (n = 12) and in single channel recordings in the cell-attached configuration the open probability was reduced at -60 mV from 0.39 +/- 0.14 to 0.08 +/- 0.01. cGMP had no effect on excised inside-out patches, indicating that an intact cytosolic milieu with functioning phosphorylation cascades is necessary. cGMP seems to be an important second messenger which reduces the potassium conductance of vestibular hair cells.     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

Effect of Microstructural Control on Thermoelectric Properties of Hot-Pressed Aluminum-Doped Zinc Oxide

The thermal conductivity of polycrystalline Al-doped ZnO was controlled through the fabrication of nanostructured polycrystalline materials, by hot-pressing nanosized Zn_{1– x} Al _x O ( x = 0.01, 0.02) particles, which were synthesized by a coprecipitation and spray-drying method. This process resulted in an improved thermoelectric power factor because of the nanosized Zn_0.99Al_0.01O particles of the polycrystalline products. The thermal conductivity also was decreased as a result of the formation of nanocrystalline Zn_0.99Al_0.01O.     

The polymerization and copolymerization of nitroalkyl acrylates and nitroalkyl methacrylates

Nitroalkyl acrylates and methacrylates involving some new compounds were prepared. The homopolymerization of these monomers in toluene and their copolymerization with styrene in acetone were carried out with azobisisobutyronitrile as initiator. The rate of polymerization of the nitroalkyl acrylates showed a correlation with the number of nitro groups situated on the ester side chain. The apparent activation energies of the polymerization were found to be 22.0–27.5 kcal./mole for the nitroalkyl acrylates and about 11.5–13.0 kcal./mole for the nitroalkyl methacrylates. From the reactivity ratios and Q-e values of the copolymerization the following information was obtained. The copolymerization behavior of nitroalkyl acrylates and methacrylates showed an alternating tendency, and these monomers belong to the conjugative monomer groups. On the reactivities of these monomers, the polarity of vinyl group was affected a little by nitro group of ester bond side, and the resonance affected little. These monomers were crosslinked with 2-methyl-2-nitro-1,3-propylene diacrylate. Some of the polymers showed marked improvement in the physical properties of elastomers.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Hydrothermal Synthesis and Formation Mechanisms of Lanthanum Tin Pyrochlore Oxide

Well-defined La₂Sn₂O₇ with a phase-pure pyrochlore structure was produced by hydrothermal synthesis at temperatures as low as 200°C. Production of phase-pure La₂Sn₂O₇ requires a pH above 10, and higher pH accelerates the crystallization process. The synthesis produced spherical particles of average particle size ∼0.59 μm (±0.12) and surface area ∼14.1 m²/g. SEM and TEM observation for morphologic evolution and kinetic analysis during crystallization indicated that La₂Sn₂O₇ formation probably proceeds via a two-step reaction. First a transient dissolution–precipitation occurs. Then the primary crystallites aggregate because of their colloidal instability, and heterocoagulation with the lanthanum hydrous oxide precursor particles also occurs. The sluggish reaction rate at the later stage of reaction is characterized by an in situ transformation, where the soluble tin species is diffused through the porous La₂Sn₂O₇ aggregates to react with entrapped lanthanum precursors.     

Direct Formation of Crystalline Gadolinium-Doped Ceria Powder via Polymerized Precursor Solution

Synthesis of Ce_0.9Gd_0.1O_1.95 (CGO) powder from a polymeric precursor solution containing a mixture of nitrates, nitric acid, and ethylene glycol was investigated with emphasis on the effect of polymerization of the precursor solution on the crystallization and morphology of the derived solid intermediate and the final oxide powder. It is shown for the first time in this work that the solid intermediate derived from the polymerized solution is present in the form of well-crystallized cerium-gadolinium formate solid solution, Ce_{1− x} Gd _x (HCOO)₃, exhibiting anisotropic growth. Further polymerization of the precursor solution resulted in the direct formation of loosely agglomerated nanoscaled CGO oxide powder from the polymerized solution at temperatures as low as 130°C.     

Experimental study of neutron counting in a zero-power reactor driven by a neutron source inherent in highly enriched uranium fuels

Even a zero-power reactor core containing highly enriched uranium has a weak neutron source inherent in uranium 235, and consequently, a neutron counter placed closely to the core without external neutron source registers a certain counting rate. The study of the counting is very important for zero-power reactor physics experiments with a high precision. In this experimental study, first, at a shutdown state of the UTR-Kinki reactor without start-up neutron source, a pulse height distribution of output signals from a neutron proportional counter was measured to confirm that these signals resulted from neutron detections. At several subcritical states of the UTR, then, the Feynman-α analysis was carried out to confirm that the neutrons detected by the counter must be fission neutrons multiplied by fission chain reactions. The correlation amplitude measured in the Feynman-α analysis was much higher than that measured in a previous drive by start-up source. Further, it was also confirmed that the subcriticality dependence of neutron counting rate followed the source multiplication formula. This feature indicated that the one-point model was very successful in the subcritical range including the shutdown state.