Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

On sorting triangles in a delaunay tessellation

In a two-dimensional Delaunay-triangulated domain, there exists a partial ordering of the triangles (with respect to a vertex) that is consistent with the two-dimensional visibility of the triangles from that vertex. An equivalent statement is that a polygon that is star-shaped with respect to a given vertex can be extended, one triangle at a time, until it includes the entire domain. Arbitrary planar triangulations do not possess this useful property which allows incremental processing of the triangles.This work was partially supported by the National Science Foundation's US-Italy Collaborative Research Program under Grant INT-8714578 and Information, Robotics, and Intelligent Research Grant IRI-8704781.     

Complete forward displacement solutions for a class of three-branch parallel manipulators

Forward displacement solutions are presented for a class of spatial parallel manipulators. In particular, considered are manipulators consisting of a platform supported through passive spherical joints by three branches, each branch having three-revolute joints forming its main arm. Solutions are described for arbitrary main-arm layouts and for all possible cases of redundant (nine, eight, and seven sensors) and non-redundant (six sensors) sensing of branch main-arm joint displacements. It is demonstrated that closed-form forward displacement solutions can be found for all cases of redundant sensing. Furthermore, it is shown that a closed-form solution can be obtained for one of the two possible cases of non-redundant sensing of the main-arm joint displacements. The only case of joint displacement sensing not allowing a closed-form forward displacement solution is two joints sensed per branch, a case that can be expressed as a 16th-order polynomial of a single variable. Due to the importance of having efficient and failure-safe solutions for the forward displacement problem, it is suggested that appropriate redundancy in displacement sensing should be an important consideration in the design of parallel manipulation devices. © 1994 John Wiley & Sons, Inc.     

Religion and spirituality: Linkages to physical health.

Evidence is presented that bears on 9 hypotheses about the link between religion or spirituality and mortality, morbidity, disability, or recovery from illness. In healthy participants, there is a strong, consistent, prospective, and often graded reduction in risk of mortality in church/service attenders. This reduction is approximately 25% after adjustment for confounders. Religion or spirituality protects against cardiovascular disease, largely mediated by the healthy lifestyle it encourages. Evidence fails to support a link between depth of religiousness and physical health. In patients, there are consistent failures to support the hypotheses that religion or spirituality slows the progression of cancer or improves recovery from acute illness but some evidence that religion or spirituality impedes recovery from acute illness. The authors conclude that church/service attendance protects healthy people against death. More methodologically sound studies are needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bayesian estimation based on vague lifetime data

In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest. In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight subproblems to simplifying computations.     

Using plasmonic cloaking method on infinite cylindrical structures and its applications

Journal of Computational Electronics - In recent years, cloaking using materials with negative electric permittivity or magnetic permeability has been studied and researched. It has been...     

Effect of dispersion states (electrostatic/electrosteric stabilization) on particles arrangement in the yttria-stabilized zirconia sediments

In the present work, particle arrangement and their packing in the sediment layer of zirconia suspension were studied. To evaluate the particle settling, aqueous suspensions of zirconia nanoparticles were prepared in different dispersion states. In one state, Dolapix CE64 was used as a dispersant to provide electrosteric mechanism. In another state, pH of the suspension was adjusted at 4 to provide electrostatic mechanism. The other state was the combination of dispersant and pH adjustment which resulted in the most stable suspension. First of all, the stability of all dispersion states was evaluated by zeta potential, sediment volume (SV) and height, viscosity, and packing density (PD). Then, the sediment layers of all suspensions were characterized. Incorporation of electrostatic mechanism was resulted in a main decrease in viscosity with high surface charges, while electrosteric mechanism caused lower sedimentation of particles. Fall velocities of particles/agglomerates were estimated, and the influences of dispersion states on the particles fall velocities were characterized. The microstructural observation revealed homogeneous packing of particles in the sediment layer of the stable suspension demonstrating the proper dispersion of particles. Dolapix CE64 and pH adjustment resulted in a uniform arrangement of particles without agglomeration and spherical and regular granules with a uniform shape.     

Modification of phenol–formaldehyde resol resins by lignin,starch, and urea

Lignin‐based chemicals, starch, and urea were used as modifiers for phenol–formaldehyde resol resins. The effects of the addition stage of the modifiers used in the synthesis of the resins and the type of modification reagent on the structures of the resins and their molar masses and reactivities were investigated. The modifications with corn starch and lignin promoted condensation; this was verified by increased molar masses and high ratios of methylene bridges to the sum of free ortho and para aromatic groups with respect to the corresponding reference resin without a modification reagent. The later the modifier was added to the resin condensation mixture, the more methylene bridges were formed with respect to the amounts of free ortho and para aromatic groups. In addition, when urea or wheat starch was added in the later condensation stage, the final condensation also reached high stages. The modifications with lignosulfonate and starch, as well as the early addition of urea, enhanced p–p′ bridge structures. The lowest condensation stage and, therefore, the highest reactivity were found when wheat starch was added with the starting reagents. The curing heat of the wheat‐starch‐modified resins decreased according to the deferred addition point of starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 582–588, 2003     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

Using the genetic algorithm to enhance nonnegative matrix factorization initialization

Nonnegative matrix factorization (NMF) algorithms have been utilized in a wide range of real applications; however, the performance of NMF is highly dependent on three factors including: (1) choosing a problem dependent cost function; (2) using an effective initialization method to start the updating procedure from a near‐optimal point; and (3) determining the rank of factorized matrices prior to decomposition. Due to the nonconvex nature of the NMF cost function, finding an analytical‐based optimal solution is impossible. This paper is aimed at proposing an efficient initialization method to modify the NMF performance. To widely explore the search space for initializing the factorized matrices in NMF, the island genetic algorithm (IGA) is employed as a diverse multiagent search scheme. To adapt IGA for NMF initialization, we present a specific mutation operator. To assess how the proposed IGA initialization method efficiently enhances NMF performance, we have implemented state‐of‐the‐art initialization methods and applied to the Japanese Female Facial Expression dataset to recognize the facial expression states. Experimental results demonstrate the superiority of the proposed approach to the compared methods in terms of relative error and fast convergence.