某进口固体废物“铁精粉”的鉴别方法探析

为了确保不进口污染环境的固体废物，针对某冒充铁精粉的进口固体废物，通过外观、成分、物相分析进行了系统的鉴别。确定样品主要为经研磨加工的氧化铁皮，属于禁止进口的固体废物——轧钢产生的氧化皮。     

大庆长垣外围油田的开发问题

本文在对大庆长垣外围油田的地质情况、油藏类型综合分析评价的基础上,论述了开发这些油田的一系列有关问题。     

Effects of selenium and vitamin E on incidence of retained placenta

In a series of experiments over 3 yr, relatively low doses of selenium and vitamin E were injected intramuscularly 3 wk prepartum to pregnant Israeli-Holstein dairy cows in a high-producing herd (9000 kg milk/yr) with a history of retained placenta in 17% of the primiparous and 28% of the multiparous animals, as recorded for the 12 mo preceding the study. Selenium ranged from .035 to .109 ppm in the prepartum diet and from .160 to .200 ppm in the postpartum diet. Doses of selenium ranging from 2.3 to 23.0 mg reduced the incidence of retained placenta in 186 primiparous and in 428 multiparous to 7 and 15%, which was half of that of controls. Low doses of selenium (2.3 to 4.6 mg) tended to be more effective than higher ones. Selenium alone was at least as effective as a combination of selenium and vitamin E. Dosage, timing, mechanism, and interactions of selenium with other factors in reducing the incidence of retained placenta need clarification.     

主动阻尼控制中的扩展加速度输出反馈法

正位置反馈(PPF)是一种能够显著提高结构模态阻尼的控制策略，但是这种策略在原理和应用中具有一定的局限性。本文在指出了传统的PPF控制器的优缺点基础上，提出一种扩展的加速度输出反馈控制方法AOEF，同时给出了最优AOEF控制器的设计计算方法。仿真计算和实验表明，在传感器／作动器同相的情况下，采用这种控制器的闭环系统具有无条件的稳定性，在非同相的情况下也能达到优良的控制性能。     

聚合物冷拉过程的流函数分析

用流函数法分析了聚合物拉伸成形时，颈缩的发生和扩展过程，文中论证了采用流函数法的优越性和适用性，并将流函数法计算结果和有限元法计算结果作了对比。     

蛋白质分子链的超声速孤立子

在Ｄａｖｙｄｏｖ简谐蛋白质分子链模型的基础上，进行合理的连续近似处理，得到了超声速和亚声速孤立子解，并求得孤立子能量．     

Subanesthetic concentrations of isoflurane suppress learning as defined by the category-example task

It has been shown that chronic oral steroid therapy (ST) does not induce respiratory muscle dysfunction in normal and asthmatic subjects. As corticosteroids are sometimes chronically used in the treatment of the patients with chronic obstructive pulmonary disease (COPD), the aim of our study was to verify whether ST could cause respiratory muscle impairment and, since ST also affects the central nervous system, whether ST could influence the ventilatory pattern. We retrospectively studied 12 COPD patients (group A), on long-term therapy (for at least 4 consecutive months, range 4-18 months) with an oral steroid, deflazacort, 15 mg.d-1. The subjects were strictly matched, with regard to age, sex, height, weight, forced expiratory volume in one second (FEV1), residual volume (RV), arterial oxygen tension (PaCO2), arterial carbon dioxide tension (PaCO2) and pH, with 12 COPD patients (Group B) who had never taken oral steroids. To assess respiratory muscle strength, we measured maximal inspiratory (MIP) and expiratory (MEP) pressures, while mouth occlusion pressure (P0.1) was employed to assess neuromuscular drive; ventilatory pattern and airway impedence were also evaluated. Effectiveness of ST was confirmed by the plasmatic levels of endogenous cortisol. No significant differences were observed between the two groups with regard to MIP (A 72.2 +/- 9.7 vs B: 70 +/- 7.2 cmH2O) and MEP (A 91.6 +/- 10.5 vs B 94.4 +/- 7.6 cmH2O) whilst P0.1 was significantly higher in group A (2.6 +/- 0.3 cmH2O) than in group B (1.8 +/- 0.1 cmH2O). No significant differences were found among all the ventilatory parameters, but the impedence was significantly higher in group A.(ABSTRACT TRUNCATED AT 250 WORDS)     

The State of the Art of Spatial Interfaces for 3D Visualization

We survey the state of the art of spatial interfaces for 3D visualization. Interaction techniques are crucial to data visualization processes and the visualization research community has been calling for more research on interaction for years. Yet, research papers focusing on interaction techniques, in particular for 3D visualization purposes, are not always published in visualization venues, sometimes making it challenging to synthesize the latest interaction and visualization results. We therefore introduce a taxonomy of interaction technique for 3D visualization. The taxonomy is organized along two axes: the primary source of input on the one hand and the visualization task they support on the other hand. Surveying the state of the art allows us to highlight specific challenges and missed opportunities for research in 3D visualization. In particular, we call for additional research in: (1) controlling 3D visualization widgets to help scientists better understand their data, (2) 3D interaction techniques for dissemination, which are under‐explored yet show great promise for helping museum and science centers in their mission to share recent knowledge, and (3) developing new measures that move beyond traditional time and errors metrics for evaluating visualizations that include spatial interaction.     

AZ31镁合金初始动态再结晶的临界条件研究

为确定AZ31镁合金初始动态再结晶的临界条件或临界应变，通过在变形温度范围473～623K、应变速率范围0．001-1 s^-1条件下进行等温压缩试验，利用所得数据并采用单参数方法，建立起AZ31镁合金初始动态再结晶的临界条件，即临界应变（εc）与变形条件（引入温度补偿应变速率因子即Zener-Hollomon参数）的定量关系，并对不同应变下合金微观组织的演变规律进行了研究。     

A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.