Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

The presentations made, as well as the discussions, in the panels at the workshop, Thermal Challenges in Next Generation Electronic Systems (THERMES), are summarized in this paper. The panels dealt with diverse topics including thermal management roadmaps, microscale cooling systems, numerical modeling from the component to system levels, hardware for future high performance and Internet computing architectures, and transport issues in the manufacturing of electronic packages. The focus of the panels was to identify barriers to further progress in each area that require the attention of the research community.     

Cooling rate effects on the structure and transformation behavior of Cu-Zn-Al shape memory alloys

Different fragments of a hot-rolled and homogenized Cu–Zn–Al shape memory alloy（SMA） were subjected to thermal cycling by means of a differential scanning calorimetric（DSC） device. During thermal cycling, heating was performed at the same constant rate of increasing temperature while cooling was carried out at different rates of decreasing temperature. For each cooling rate, the temperature decreased in the same thermal interval. During each cooling stage, an exothermic peak（maximum） was observed on the DSC thermogram. This peak was associated with forward martensitic transformation. The DSC thermograms were analyzed with PROTEUS software： the critical martensitic transformation start（Ms） and finish（Mf） temperatures were determined by means of integral and tangent methods, and the dissipated heat was evaluated by the area between the corresponding maximum plot and a sigmoid baseline. The effects of the increase in cooling rate, assessed from a calorimetric viewpoint, consisted in the augmentation of the exothermic peak and the delay of direct martensitic transformation. The latter had the tendency to move to lower critical transformation temperatures. The martensite plates changed in morphology by becoming more oriented and by an augmenting in surface relief, which corresponded with the increase in cooling rate as observed by scanning electron microscopy（SEM） and atomic force microscopy（AFM）.     

Formulation and characterization of intranasal mucoadhesive nanoparticulates and thermo-reversible gel of levodopa for brain delivery

Levodopa is the drug of choice in the treatment of Parkinson’s disease but it exhibits low oral bioavailability (30%) and very low brain uptake due to its extensive metabolism by aromatic amino acid decarboxylase in the peripheral circulation. Hence, levodopa is co-administered with carbidopa, a peripheral amino acid decarboxylase inhibitor. In an attempt to improve brain uptake and to avoid degradation of levodopa in peripheral circulation and the use of carbidopa in combination, nose to brain drug delivery of levodopa alone via the olfactory route and the trigeminal nerves has been investigated. Chitosan nanoparticles loaded with levodopa (CNL) were prepared and were incorporated in a thermo-reversible gel prepared using Pluronic PF127 (CNLPgel). The preparation of CNL and CNLPgel was optimized for formulation parameters such as chitosan:TPP ratio, drug load Pluronic concentration to obtain desired particle size of CNL, gelling temperature, gelling time and mucoadhesive strength of CNLPgel. Rheological studies indicated a change in the rheological behavior of plain pluronic gel from Newtonian system at 30?°C to pseudoplastic behavior at 35?°C on incorporation of CNL. In vitro release studies from CNL obeyed Higuchi kinetic model, whereas the drug release from CNLPgel followed the Hixson–Crowell model. In vivo studies indicated a maximum recovery of the drug in brain following intranasal administration of CNL suspension in saline closely followed by the drug dispersed in plain pluronic gel.     

芝加哥伟基河畔南111号办公楼

伴随着芝加哥市区的高层办公楼——USB塔楼的成功,另一幢崭新的高层办公建筑111SouthWacker将由同一个建筑开发商约翰·巴克公司(The John Buck Company)来完成,场地就位于紧邻USB塔楼南面的另一街区,承担设计的是罗汉·卡普里尔·哥蒂斯科建筑师事务所(LohanCaprile Goettsch)。111South Wacker是一幢高52层、面积达13万平方米的办公建筑,设计的重点在于为客户提供高适应性、高效率和经济性好的办公空间。平面设计的主要特征在西北和西南角位置采用凹角设计,用外围的柱子支撑,在每层提供六角形无柱办公平面。建筑高效中心核的设计考…     

Thermal Behavior of Mechanically Alloyed Powders Used for Producing an Fe-Mn-Si-Cr-Ni Shape Memory Alloy

In order to produce shape memory rings for constrained-recovery pipe couplings, from Fe-14 Mn-6 Si-9 Cr-5 Ni (mass%) powders, the main technological steps were (i) mechanical alloying, (ii) sintering, (iii) hot rolling, (iv) hot-shape setting, and (v) thermomechanical training. The article generally describes, within its experimental-procedure section, the last four technological steps of this process the primary purpose of which has been to accurately control both chemical composition and the grain size of shape memory rings. Details of the results obtained in the first technological step, on raw powders employed both in an initial commercial state and in a mixture state of commercial and mechanically alloyed (MA) powders, which were subjected to several heating-cooling cycles have been reported and discussed. By means of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and X-ray diffraction (XRD), the thermal behaviors of the two sample powders have been analyzed. The effects of the heating-cooling cycles, on raw commercial powders and on 50% MA powders, respectively, were argued from the point of view of specific temperatures and heat variations, of elemental diffusion after thermal cycling and of crystallographic parameters, determined by DSC, SEM, and XRD, respectively.     

Binary‐offset‐carrier modulation techniques with applications in satellite navigation systems

An important aspect in designing the modulation scheme for various satellite systems, such as the modernized GPS and Galileo, is to obtain good spectral properties and suitable spectral shaping. For example, in the future satellite navigation systems, some of the main goals are: low interference with the existing GPS signals, good root‐mean‐square (RMS) bandwidth, good time resolution (in order to allow the separation between channel paths and to decrease the synchronization errors) etc. Starting from the recently proposed cosine‐ and sine‐BOC modulation families for GPS and Galileo systems, we introduce a new, generalized family, denoted here by double‐BOC (DBOC) modulation. We derive and analyze the properties of the power spectral densities (PSD) and autocorrelation functions (ACF) of the DBOC modulation with various orders, we show its relationship with BPSK, sine‐ and cosine‐BOC modulations, and we illustrate via several examples how to choose optimally the parameters of this new modulation family, according to different optimization criteria. The examples are targeting at applications such as the design of suitable modulations for Galileo open service (OS) and public regulated service (PRS) signals, but the authors believe that the DBOC concept might be useful to other satellite‐based applications, when the available bandwidth is large enough. Copyright © 2006 John Wiley & Sons, Ltd.     

A subset of conserved tRNA genes in plastid DNA of nongreen plants

The plastid genome of the nonphotosynthetic parasitic plant Epifagus virginiana contains only 17 of the 30 tRNA genes normally found in angiosperm plastid DNA. Although this is insufficient for translation, the genome is functional, so import of cytosolic tRNAs into plastids has been suggested. This raises the question of whether the tRNA genes that remain in E. virginiana plastid DNA are active or have just fortuitously escaped deletion. We report the sequences of 20 plastid tRNA loci from Orobanche minor, which shares a nonphotosynthetic ancestor with E. virginiana. The two species have 9 intact tRNA genes in common, the others being defunct in one or both species. The intron-containing trnLUAA gene is absent from E. virginiana, but it is intact, transcribed, and spliced in O. minor. The shared intact genes are better conserved than intergenic sequences, which indicates that these genes are being maintained by natural selection and, therefore, must be functional. For the most part, the tRNA species conserved in nonphotosynthetic plastids are also those that have never been found to be imported in plant mitochondria, which suggests that the same rules may govern tRNA import in the two organelles. A small photosynthesis gene, psbI, is still intact in O. minor, and computer simulations show that some small nonessential genes have an appreciable chance of escaping deletion.     

Highly efficient techniques for mitigating the effects of multipath propagation in DS-CDMA delay estimation

Delay estimation in direct-sequence code-division multiple-access (DS-CDMA) systems is necessary for accurate code synchronization and for applications such as mobile phone positioning. Multipath propagation is among the main sources of error in the DS-CDMA delay estimation process, together with multiple access interference and non-line-of-sight (NLOS) propagation. This paper provides a review of main delay estimation techniques, existing in the literature so far, which are able to cope with multipath propagation, together with our novel delay estimation techniques proposed in the context of DS-CDMA systems. The performance of all these techniques is compared through analysis and simulations, considering also their relative computational complexity and required prior information. Starting from the traditional delay locked loops (DLL) and their improved variants, we discuss several recently introduced delay estimation techniques able to cope with multipath propagation. The characterization of these methods is given in a unified framework, suited for both rectangular and root raised cosine pulse shapes. The main focus in the performance comparison of the algorithms is on the closely-spaced multipath scenario, since this situation is the most challenging for achieving diversity gain with low delay spreads and for estimating LOS component with high accuracy in positioning applications.