Thermo-protective properties of polymer composites with nano-titanium dioxide

International Journal of Mechanics and Materials in Design - The present work investigates the ablative and thermal properties of an epoxy resin which was modified with titanium dioxide...     

Acidity and basicity of hydrotalcite derived mixed Mg-Al oxides studied by test reaction of MBOH conversion and temperature programmed desorption of NH3 and CO2

Mg-Al hydrotalcites intercalated with five different interlayer anions—CO₃²⁻, SO₄²⁻, Cl⁻, HPO₄²⁻ or terephthalate—were synthesized by either the coprecipitation or ion-exchange method. The structure of the as-synthesized samples and the presence of intended anions in the interlayer gallery of hydrotalcites were determined by X-ray diffraction and FTIR spectroscopy. On calcination at 600 °C the materials were transformed into mixed metal oxides. The kind of the counterbalancing anions present in the parent hydrotalcite influences strongly textural parameters of the obtained Mg-Al oxides. Both temperature-programmed desorption of NH₃ and CO₂, and test reaction of 2-methyl-3-butyn-2-ol (MBOH) conversion were used to determine the acidity and basicity of the samples. The hydrotalcite derived mixed Mg-Al oxides showed the presence of Brønsted and Lewis acid and base sites. However, the strong basic character of the solids caused that acetone and acetylene were observed as the major products of MBOH conversion.     

Influence of some lysosomotropic compounds on calcium ion desorption process from liposome membrane

The effect of a group of model lysosomotropic compounds on the process of Ca2+ ion desorption from lecithin liposome membranes was studied. The compounds studied were: hydrochlorides of fatty acids 2-dimethylaminoethyl esters (DM-n) for n = 9, 11, 13 and 15 carbon atoms in the fatty acid alkyl chain and methochloride of 2-dimethylaminoethyl laurate (DMS-11). It was found that all the compounds studied caused increased desorption with increasing concentration of the compound. Most effective was the quaternary ammonium salt, DMS-11. Moreover, it was found that the process of Ca2+ desorption from the membrane depended on pH of the medium. Compound DM-11 was more active at pH 8 than at pH 5. The action of DM-n compounds depended on the alkyl chain length, DM-11 and DM-13 being the most active. Apparently free amines penetrate the phospholipid membranes and incorporate into its hydrophobic core causing structural deformations. Hydrochlorides of fatty acids and the quaternary ammonium salt induce desorption of calcium ions mostly as a result of competitive electrostatic interactions. By quantum chemistry, PM3 method, and methods of molecular modelling we established the higher hydrophilicity of the polar head of DM-n series with respect to the polar head of the DMS-n compounds. DM-n compounds possess both acceptor and donor properties for hydrogen bonding while DMS-n are instrumental as acceptors only. It should be noted, that the results obtained in this paper for model membranes are in accordance with those for biological ones.     

Selective oxidation of ammonia to nitrogen on transition metal containing mixed metal oxides

The selective catalytic oxidation of ammonia to nitrogen (NH₃-SCO) has been studied over hydrotalcite derived mixed metal oxides containing Cu, Co, Fe or Ni. XRD, BET, NH₃-TPD and TPR techniques were used for catalysts characterization. Results of NH₃-SCO were compared with those of selective catalytic reduction of NO with NH₃ (NO-SCR). Reaction mechanism was studied by temperature-programmed surface reaction (TPSR) and activity tests with a various contact time. Catalytic performance of the studied samples depends on both kind and loading of transition metals in the mixed metal oxide system. The Cu-containing samples have been found to be the most active catalysts of the NH₃-SCO process. Transition metal loading strongly influences distribution of ammonia oxidation products. The highest selectivity to N₂ was measured for the catalysts with the lowest transition metal content.     

Quality assessment for a visual and automatic license plate recognition

Video transmission and analysis is often utilized in applications outside of the entertainment sector, and generally speaking this class of video is used to perform specific tasks. Examples of these applications include security and public safety. The Quality of Experience (QoE) concept for video content used for entertainment differs significantly from the QoE of surveillance video used for recognition tasks. This is because, in the latter case, the subjective satisfaction of the user depends on achieving a given functionality. Recognizing the growing importance of video in delivering a range of public safety services, we focused on developing critical quality thresholds in license plate recognition tasks based on videos streamed in constrained networking conditions. Since the number of surveillance cameras is still growing it is obvious that automatic systems will be used to do the tasks. Therefore, the presented research includes also analysis of automatic recognition algorithms.     

Analysis of polymer foil heaters as infrared radiation sources

Infrared radiation as a heat source is used in many fields. In particular, the positive effect of far-infrared radiation on living organisms has been observed. This paper presents two technological solutions for infrared heater production using polymer-silver and polymer-carbon pastes screenprinted on foil substrates. The purpose of this work was the identification of polymer layers as a specific frequency range IR radiation sources. The characterization of the heaters was determined mainly by measurement of the surface temperature distribution using a thermovision camera and the spectral characteristics were determined using a special measuring system. Basic parameters obtained for both, polymer silver and polymer carbon heaters were similar and were as follows: power rating of 10–12 W/dm², continuous working surface temperature of 80–90 °C, temperature coefficient of resistance (TCR) about +900 ppm/K for polymer-carbon heater and about +2000 ppm/K for polymer-silver, maximum radiation intensity in the wavelength range of 6–14 μm with top intensity at 8.5 μm and heating time about 20 min. For comparison purposes, commercial panel heater was tested. The results show that the characteristics of infrared polymer heaters are similar to the characteristics of the commercial heater, so they can be taken into consideration as the alternative infrared radiation sources.     

Long-Term Changes in Ovarian Follicles of Gilts Exposed Neonatally to Methoxychlor: Effects on Oocyte-Derived Factors,Anti-Müllerian Hormone,Follicle-Stimulating Hormone,and Cognate Receptors

In this paper, we investigated the effects of neonatal exposure to methoxychlor (MXC), a synthetic organochlorine used as an insecticide with estrogenic, antiestrogenic, and antiandrogenic activities on ovarian follicles of adult pigs. Piglets were injected with MXC (20 μg/kg body weight) or corn oil (controls) from postnatal Day 1 to Day 10 (n = 5 per group). Then, mRNA expression, protein abundance and immunolocalization of growth and differentiation factor 9 (GDF9), bone morphogenetic protein 15 (BMP15), anti-Müllerian hormone (AMH) and cognate receptors (ACVR1, BMPR1A, BMPR1B, TGFBR1, BMPR2, and AMHR2), as well as FSH receptor (FSHR) were examined in preantral and small antral ovarian follicles of sexually mature gilts. The plasma AMH and FSH levels were also assessed. In preantral follicles, neonatal exposure to MXC increased GDF9, BMPR1B, TGFBR1, and BMPR2 mRNAs, while the levels of AMH and BMP15 mRNAs decreased. In addition, MXC also decreased BMP15 and BMPR1B protein abundance. Regarding small antral follicles, neonatal exposure to MXC upregulated mRNAs for BMPR1B, BMPR2, and AMHR2 and downregulated mRNAs for AMH, BMPR1A, and FSHR. MXC decreased the protein abundance of AMH, and all examined receptors in small antral follicles. GDF9 and BMP15 were immunolocalized in oocytes and granulosa cells of preantral follicles of control and treated ovaries. All analyzed receptors were detected in the oocytes and granulosa cells of preantral follicles, and in the granulosa and theca cells of small antral follicles. The exception, however, was FSHR, which was detected only in the granulosa cells of small antral follicles. In addition, MXC decreased the plasma AMH and FSH concentrations. In conclusion, the present study may indicate long-term effects of neonatal MXC exposure on GDF9, BMP15, AMH, and FSH signaling in ovaries of adult pigs. However, the MXC effects varied at different stages of follicular development. It seems that neonatal MXC exposure may result in accelerated initial recruitment of ovarian follicles and impaired cyclic recruitment of antral follicles.     

Novel adhesive system based on 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) and hyperbranched polyglycerols

Two hyperbranched polyglycerols bearing 1,1,1-tris(hydroxymethyl)propane or Bisphenol A core and terminal hydroxyl functionality were examined as components of novel wood adhesive systems. Two 1,3-dimethylol-4,5-dihydroxyethyleneurea resins (DMDHEU) were used as crosslinkers. Shear strength tests revealed that the adhesives containing up to 75 wt% of renewable glycerol-derived polyglycerols retained performance comparable to that of neat DMDHEU. The results give way to extending the area of application of hyperbranched polyglycerols in the field of wood adhesives.     

Unconventional fractional quantum Hall effect in monolayer and bilayer graphene

The commensurability condition is applied to determine the hierarchy of fractional fillings of Landau levels in monolayer and in bilayer graphene. The filling rates for fractional quantum Hall effect (FQHE) in graphene are found in the first three Landau levels in one-to-one agreement with the experimental data. The presence of even denominator filling fractions in the hierarchy for FQHE in bilayer graphene is explained. Experimentally observed hierarchy of FQHE in the first and second Landau levels in monolayer graphene and in the zeroth Landau level in bilayer graphene is beyond the conventional composite fermion interpretation but fits to the presented nonlocal topology commensurability condition.