Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Abrasive wear of dental composite resins

Abrasive wear is a major problem in the application of dental composite resins. In this study the friction and wear behaviours of two types of dental composites: one containing relatively coarse filler particles and some microfillers (Estilux) and another containing only microfiller particles (Durafill), have been investigated by using a scratch testing machine. Experimental results show that the coefficients of friction in both composites are essentially constant for applied loads up to 20 N. The wear resistance of Durafill is better than Estilux. Under the same testing conditions, the size, shape and distribution of the filler particles are more important variables than applied load and sliding speed in controlling the wear mechanism. It is shown that for Estilux, plastic ploughing by the diamond indenter is the predominant mechanism. For Durafill, however, the formation and propagation of tensile cracks on the worn surface is the main wear mechanism. The effects of two different indenters, diamond and enamel, on the basic wear mechanisms are also discussed.     

Analysis of electrocardiograms during atrial fibrillation

The research discussed in this article is motivated by the search for an optimal classification of the different types of atrial fibrillation (AF) on the basis of recorded atrial signals. This would facilitate the selection of an optimal therapy. This article focuses on the biophysical models of the genesis of ECG waveforms during AF. The model of the electric activity of the atria was found to have sufficient realism to be used to describe the electric sources during AF. The inclusion of the volume conduction model resulted in electrocardiographic signals that are in all aspects similar to those observed clinically. The model is currently applied to solve various problems related to optimal signal preprocessing and extraction of features in AF signals for the classification of AF abnormalities. The biophysical model of the atrial activity is an essential element in this research, since it is capable of describing the electric source specifications derived from different hypotheses relating to the etiology of AF     

In situ SEM studies on the effects of particulate reinforcement on fatigue crack growth mechanism of aluminium-based metal-matrix composite

The effects of particulate reinforcement on the fatigue behaviour and fatigue mechanisms of two 6061 aluminium-based metal-matrix composites (MMCs) in three different heattreatment conditions were studied in situ with a scanning electron microscope and compared to the unreinforced alloy in the as-received condition. It was observed that the fatigue properties of the MMCs were influenced by the ceramic particles in two ways: firstly the particles increased the fatigue stress intensity threshold mainly by crack-deflection and crack-closure mechanisms, and secondly, the particles raised the fatigue crack growth rates in the Paris region by providing an easy crack path. The effect of ageing was small on the fatigue stress intensity threshold of MMCs, but for the peak-aged MMCs the fatigue crack growth rates in the Paris region were faster. The mechanism of fatigue crack growth was largely associated with the matrix/particle interface and the linkage with subcracks initiated ahead of the main crack at high applied stress intensity factors.     

单模光纤中模耦合微扰功率谱与偏振关系的研究

提出用测量光纤偏振耦合率来确定模耦合系数，从而得到耦合微扰功率谱与双折射关系。它给出了光纤拉制中微扰作用 的信息，是研制偏振光纤的一种有效方法。     

Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

On the Cutoff Wavelength of Rectangular-Shaped Microshield Line by Edge Element Method

In this paper, the cutoff characteristic of rectangular-shaped microshield transmission line has been analysed by edge element method. Dependence of cutoff wavelengths on the thickness of metallic signal strip, dielectric constant of dielectric substrate and the width of the rectangular-shaped ground conductor are presented in tabular form. Numerical results in this paper have important values in design of rectangular-shaped microshield lines in microwave and millimeter wave integrated circuits.