Effect of the addition of Fe2O3 and heat treatment duration on the magnetic susceptibility of V2O5-P2O5-B2O3 glass system

The effect of the addition of Fe₂O₃ and heat treatment duration on the magnetic susceptibility of vanadium borophosphate glass were studied. The magnetic susceptibility of glass samples was found to increase with increasing Fe₂O₃ content, which may be explained by the formation of the FeO₆ group and the change of Fe²⁺ to Fe³⁺ which has higher paramagnetic properties. No detectable changes in the magnetic susceptibility with heat treatment for the samples containing 0.0, 0.5 and 1.0 mol% Fe₂O₃ was observed. The magnetic susceptibility for the heat treated samples containing 2.5, 5.0 and 7.5 mol% Fe₂O₃ decreases sharply with increasing duration of heat treatment up to 6 h and then remains almost constant. The sharp decrease in magnetic susceptibility of 2.5 mol% Fe₂O₃ is attributed to the increase in the number of ferrous ions. The sharp decrease for samples containing 5.0 and 7.5 mol% Fe₂O₃ is attributed to the increase in the number of Fe³⁺ in tetrahedral co-ordination. The rate of crystallization owing to the heat treatment was calculated and was found to increase with increasing iron oxide content. The geometry of crystallization was found to be in three-, two-and one-dimension(s) for samples containing 2.5, 5.0 and 7.5 mol% Fe₂O₃, respectively.     

A meta-modelling framework for knowledge consistency in collaborative design

The design of complex system requires a lot of interactions between experts and then between numerous Computer Aided X software (CAX) (where X can be Design (CAD), Engineering (CAE), Manufacturing (CAM), etc.). In order to improve the consistency of the whole system design and the related data and information, knowledge crossing the expertises must be tracked and formalized regarding a shared reference. That means that instead of defining a large reference models to which each expert refers to, a light collaborative model is defined enabling to connect data from each expert model to adhoc data from other expert models, following the least commitment principle. In this topic, a new meta-model is proposed in a Model-Driven Engineering approach to manage the integration of heterogeneous experts’ knowledge models in a collaborative process. The structure of the proposed knowledge meta-model is defined taking into account the complexity of knowledge definition and the properties of its components. This meta-model is split in a meta-model of data on one hand and a Collaboration Meta-Model in the other hand, to represent the distinction between the core concepts of knowledge and additional elements serving to represent the relation between these concepts, and between concepts of heterogeneous experts’ models. The proposed meta-model is illustrated on an industrial case study to highlight the way to put it in use, and its interests to enable collaboration between experts throughout the design process.     

Interplay between Humoral and CLA+ T Cell Response against Candida albicans in Psoriasis

Candida albicans (CA) infections have been associated with psoriasis onset or disease flares. However, the integrated immune response against this fungus is still poorly characterized in psoriasis. We studied specific immunoglobulins in plasma and the CA response in cocultures of circulating memory CD45RA⁻ cutaneous lymphocyte antigen (CLA)^+/− T cell with autologous epidermal cells from plaque and guttate psoriasis patients (cohort 1, n = 52), and also healthy individuals (n = 17). A complete proteomic profile was also evaluated in plaque psoriasis patients (cohort 2, n = 114) regarding their anti-CA IgA levels. Increased anti-CA IgA and IgG levels are present in the plasma from plaque but not guttate psoriasis compared to healthy controls. CA cellular response is confined to CLA⁺ T cells and is primarily Th17. The levels of anti-CA IgA are directly associated with CLA⁺ Th17 response in plaque psoriasis. Proteomic analysis revealed distinct profiles in psoriasis patients with high anti-CA IgA. C-C motif chemokine ligand 18, chitinase-3-like protein 1 and azurocidin were significantly elevated in the plasma from plaque psoriasis patients with high anti-CA levels and severe disease. Our results indicate a mechanism by which Candida albicans exposure can trigger a clinically relevant IL-17 response in psoriasis. Assessing anti-CA IgA levels may be useful in order to evaluate chronic psoriasis patients.     

Effect of SiO2 Addition on Chromium Transitions in Borate Glasses

Silicon - Melt-quenching technique was used to prepare borosilicate glasses of composition xSiO2- (75-x) B2O3–24.7Li2O-0.3Cr2O3 (x = 0, 10, 20, 30, 40 and 50 mol%). With...     

Thermal decomposition and pore structure of pure and doped stannic oxide gel

The surface properties of a stannic oxide gel and its thermal dehydration products obtained both in vacuo and in the presence of air in the temperature range 100–600°C have been examined by N₂ adsorption. Phase and structural changes have been followed by differential thermal analysis and X-ray diffractometry. Complete pore structure analysis showed that samples dehydrated at or below 250°C were microporous. Above 250°C the pores were found to widen with increase of temperature, the widening occurring concurrently with the crystallisation process. Doping with cations of lower valency (Li⁺ and Al³⁺) than the host cation (Sn⁴⁺) had little effect on the pore structure and specific surface area for the low temperature samples (≤250°), whereas at higher temperatures, e.g. 600°C, it increased the specific area remarkably. The dope ions produce oxygen vacancies and hinder or retard sintering in SnO₂.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

Fuzzy fault tolerant predictive control for a diesel engine air path

This paper proposes a Fuzzy Fault Tolerant Predictive Control (FFTPC) with integral action method for a class of nonlinear systems. The Takagi-Sugeno (T-S) fuzzy approach is introduced as a modelling technique in order to consider the active control methods adapted to linear models. The proposed control strategy is based on a combination between Parallel Distributed Compensation (PDC) control law and Model Predictive Control (MPC) where the T-S fuzzy aspect uses the Unmeasurable Premise Variables (UPV). A T-S fuzzy observer provides an L2 norm estimation of system state vector and faults. The controller and observer gains are obtained by solving Linear Matrix Inequalities (LMIs) derived from the Lyapunov theory. The validity of the proposed Fault Tolerant Control (FTC) strategy is illustrated through an application to a Diesel Engine Air Path (DEAP) system.     

A branch-and-bound algorithm to minimize total weighted completion time on identical parallel machines with job release dates

In this paper, we consider an identical parallel machine scheduling problem with release dates. The objective is to minimize the total weighted completion time. This problem is known to be strongly NP-hard. We propose some dominance properties and two lower bounds. We also present an efficient heuristic. A branch-and-bound algorithm, in which the heuristic, the lower bounds and the dominance properties are incorporated, is proposed and tested on a large set of randomly generated instances.     

High-strength corundum ceramics with a lowered sintering temperature

Factors affecting the sintering, formation of a fine crystalline structure, and strength of aluminum oxide ceramics are considered. A ceramics with a strength of up to 600 MPa fabricated at 1450°C in an air medium has been presented. It is shown that the sintering temperature of ceramics based on Al₂O₃ (including -Al₂O₃) can be decreased to 1200°C.Translated from Ogneupory i Tekhnicheskaya Keramika, No. 10, pp. 2 – 5, October, 1996.     

An effective scheduling scheme for multi-hop multicast in wireless mesh networks

With the utilization of concurrent transmission strategy, a throughput-enhanced scheduling scheme is devised for multicast service in wireless multi-hop mesh networks. Since the performance of a multicast mechanism is constrained in a wireless setting due to the interference among local wireless transmissions, the interference relationships are first characterized by introducing a graph transformation method. Based on the graph transformation, the multicast scheduling problem is converted to the graph coloring problem, and then a capacity greedy algorithm is designed to provide concurrent transmission scheduling so that the demanded multicast transmission rate can be achieved. Moreover, the necessary and sufficient conditions of multicast schedulable feasibility are derived. Through corresponding simulations, it is shown that the proposed strategy can enhance the throughput of wireless multi-hop multicast systems significantly.