A heuristic algorithm for the just-in-time single machine scheduling problem with setups: a comparison with simulated annealing

This paper addresses the single machine early/tardy problem with unrestricted common due date and sequence-dependent setup times. Two algorithms are introduced to reach near-optimum solutions: the SAPT, a heuristic tailored for the problem, and a simulated annealing (SA) algorithm. It will be shown that SA provides solutions with slightly better quality; however, SAPT requires much less computational time. SAPT-SA is a hybrid heuristic that combines both approaches to obtain high quality solutions with low computational cost. Solutions provided by the three algorithms were compared to optimal solutions for problems with up to 25 jobs and to each other for larger problems.     

A multiple criteria buy versus lease analysis for governmentcontracts

In this paper, the authors describe their experiences with a real world case study that involved a buy versus lease decision for a government agency. The study was divided into two major parts: (1) the financial implications of buy versus lease; and (2) a multicriteria decision making (MCDM) model that explored the impact of both the tangible and intangible factors in a buy versus lease decision. The selected MCDM approach was the analytic hierarchy process (AHP). The study concluded that the lease option can be beneficial to both parties if the subjective criteria are considered     

Stabilization and dewatering of wastewater treatment plant sludge using combined bio/Fenton-like oxidation process

Wastewater sludge usually contains large amounts of water and organic materials; therefore, its stabilization and dewatering are of particular importance. The present study aimed to investigate the possibility of sludge stabilization and dewatering from wastewater sludge by bioleaching (Thiobacillus ferrooxidans), Fenton/bioleaching, and bioleaching/Fenton-like processes. To evaluate sludge stabilization and dewatering, specific resistance to filtration (SRF), volatile suspended solids (VSS), total suspended solids (TSS), and soluble chemical oxygen demand (SCOD) were measured. In biological treatment with T. ferrooxidans with Fe²⁺ (2?g?L^?1), 99.75, 33, 37, and 72% reduction were observed in SRF, VSS, TSS, SCOD, respectively, after 2 days. In the combined treatment of Fenton before bioleaching (including Fe²⁺ 2?g?L^?1 and H₂O₂ 1?g?L^?1 with Fenton oxidation for 30?min followed by biological treatment with T. ferrooxidans for 2 days), the reduction rates in TSS, VSS, SCOD, and SRF were 40.18, 40.88, 60.95, and 75.43%, respectively. In treatment with the combined method of bioleaching before Fenton-like oxidation, the removal rates of the aforementioned parameters were 52.5, 54.4, 88, and 99.82%, respectively. In comparison to Fenton oxidation and bioleaching alone, combined biological method of bioleaching/Fenton-like oxidation using a lower dose of H₂O₂ and Fe²⁺ significantly improved sludge dewatering and stabilization.     

杏核的活性壳：一种用于黄金回收的有价值的吸附剂

Activated carbon has been proven to be an effective adsorbent for the recovery of a wide variety of metal ions from aqueous solutions. In this research, the activated hard shell of Iranian apricot stones was used for gold recovery from electro-plating wastewater. The effect of parameters such as dose and particle size of adsorbent,pH, agitation speed of mixing on the gold recovery was investigated. The results showed that under the optimum operating conditions more than 98% of gold ions were adsorbed onto activated carbon after just 3 h. In addition, the adsorbed gold could be eluted from this adsorbent by improved striping method. The process involves contact of gold-laden adsorbent with a strong base at ambient temperatures followed by elution with an aqueous solution containing an organic solvent. It was found that activated hard shell of apricot stones has the potential to replace im ported commercial activated carbons in gold adsorption processes.     

DiffPageRank: an efficient differential PageRank approach in MapReduce

The Journal of Supercomputing - Unstructured big data processing requires efficient computational styles to rapidly analyze continuously changing data. Incremental processing is a promising...     

Techno-economic study of bioethanol production from olive wastes cake (OWC) in Iran

Clean Technologies and Environmental Policy - In this study, a techno-economic analysis of bioethanol production from the olive waste cake in Iran has been performed. The biofuel plant with a...     

Listeria monocytogenes in Aquatic Food Products—A Review

With the increased demand for lightly preserved and/or ready‐to‐eat (RTE) food products, the prevalence of the foodborne pathogen Listeria monocytogenes has increased, which is a public health concern. The goal for this review is to discuss the incidence, epidemiological importance, and contamination routes of L. monocytogenes in various aquatic ecosystems, seafood products, and processing environments and to summarize the data obtained since the 1990s. L. monocytogenes primarily enters the food‐production chain by cross‐contamination in production plants, making this pathogen a major threat to the seafood industry. This pathogen generally contaminates food products at low or moderate levels, but the levels involved in listeriosis outbreaks are significantly higher. The majority of isolates from aquatic products belong to serotype 1/2a, and outbreaks have been linked to highly similar or even indistinguishable strains. Several seafood‐processing plants are colonized by specific “in‐house” flora containing special DNA subtypes of L. monocytogenes. In such cases, L. monocytogenes populations can persist and/or multiply despite the inherent obstacles to their growth in food preservation and manufacturing operations. Therefore, food‐processing facilities must be designed carefully with an emphasis on effective cleaning and disinfecting operations in the production line.     

Elimination of mercury by adsorption onto activated carbon prepared from the biomass material

Following the previous work (Kaghazchi et al., 2010 [11]), dealing with applying a combination of two kinds of agricultural wastes to produce a new adsorbent, this study is dedicated to investigate the details of mercury adsorption process from aquatic medium by this adsorbent. So the Mix-ZC activated carbon (the sample prepared by chemical activation of a mixture of pistachio-nut shells and licorice residues impregnated with zinc chloride) was selected for doing a series of batch adsorption experiments on it. Equilibrium isotherms, such as Freundlich, Langmuir, Dubinin–Redushkevich and Temkin have been tested. Kinetic studies based on Lagergren first-order, pseudo-second-order rate expressions and intra-particle diffusion studies have been done. The mechanisms of mercury adsorption onto this adsorbent under the operating conditions were also studied.     

Bone Regeneration in rat using a gelatin/bioactive glass nanocomposite scaffold along with endothelial cells (HUVECs)

In our previous study, a three‐dimensional gelatin/bioactive glass nanocomposite scaffold with a total porosity of about 85% and pore sizes ranging from 200 to 500 μm was prepared through layer solvent casting combined with lamination technique. The aim of this study was to evaluate in vitro biocompatibility and in vivo bone regeneration potential of these scaffolds with and without endothelial cells when implanted into a critical‐sized rat calvarial defect. MTT assay, SEM observation, and DAPI staining were used to evaluate cell viability and adhesion in macroporous scaffolds and results demonstrated that the scaffolds were biocompatible enough to support cell attachment and proliferation. To investigate the in vivo osteogenesis of the scaffold, blank scaffolds and endothelial/scaffold constructs were implanted in critical‐sized defects, whereas in control group defects were left untreated. Bone regeneration and vascularization were evaluated at 1, 4, and 12 weeks postsurgery by histological, immunohistochemical, and histomorphometric analysis. It was shown that both groups facilitated bone growth into the defect area but improved bone regeneration was seen with the incorporation of endothelial cells. The data showed that the porous Gel/BaG nanocomposite scaffolds could well support new bone formation, indicating that the proposed strategy is a promising alternative for tissue‐engineered bone defects.